SJPZ-N33V

PD = 2 W Transient Voltage Suppressor Diodes SJPZ-N Series Data Sheet Description Package The SJPZ-N series are power Zener diodes designed for the protection of automotive electronic units, especially from the surge generated during load dump conditions and voltage transients induced by inductive loads. The package of the IC has high dissipation and high surge capability. Cathode Mark SJP (1) (2) Features ● AEC-Q101 Qualified ● Meets the Surge Protection Requirements in ISO7637-2 Standrard (Pulse 1 to 3) ● Suitable for High Reliability and Automotive Requirement ● High Surge Capability ● Flammability: Equivalent to UL94V-0 ● Bare Lead Frame: Pb-free (RoHS Compliant) (1) (2) (1) Cathode (2) Anode Not to scale Selection Guide Applications Protection of sensitive electronic equipment in passenger cars, trucks, vans, and buses: ● ● ● ● ● ● Engine Control Units Electric Control Units Braking System Power Steering System Airbags Audio/Infotainment Equipment Part Number VZ Min. Max. SJPZ-N18 16.8 V 19.1 V SJPZ-N27 25.1 V 28.9 V PRSM* PD 500 W 2W SJPZ-N33 31.0 V 35.0 V *500 μs, single block pulse Typical Application Battery Load Surge Absorber SJPZ-N Series GND SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 1 SJPZ-N Series Contents Description ------------------------------------------------------------------------------------------------------ 1 Contents --------------------------------------------------------------------------------------------------------- 2 Absolute Maximum Ratings --------------------------------------------------------------------------------- 3 Electrical Characteristics ------------------------------------------------------------------------------------ 4 SJPZ-N18 Rating and Characteristic Curves ------------------------------------------------------------ 5 SJPZ-N27 Rating and Characteristic Curves ------------------------------------------------------------ 7 SJPZ-N33 Rating and Characteristic Curves ------------------------------------------------------------ 9 Physical Dimensions ----------------------------------------------------------------------------------------- 11 Marking Diagram-------------------------------------------------------------------------------------------- 12 Important Notes ---------------------------------------------------------------------------------------------- 13 SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 2 SJPZ-N Series Absolute Maximum Ratings Unless otherwise specified, TA = 25 °C. Parameter Symbol Power Dissipation (1) PD Conditions Lead temperature Rating Unit 2 W (2) 13 DC Blocking Voltage — VDC 20 SJPZ-N18 V 25 500 μs, single block pulse 500 W Junction Temperature TJ — −55 to 150 °C Storage Temperature TSTG — −55 to 150 °C 1.6 mm TL Device SJPZ-N27 SJPZ-N33 PRSM Peak Pulse Reverse Power Remarks TA Copper Area 2 mm 25 mm 2 mm 2 mm Substrate 25 mm Figure 1. (1) (2) Lead Temperature Measurement Conditions See Figure 2. See Figure 1. SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 3 SJPZ-N Series Electrical Characteristics Unless otherwise specified, TA = 25 °C. Parameter Symbol Forward Voltage Drop Reverse Leakage Current Breakdown Voltage Breakdown Voltage Temperature Coefficient Breakdown Region Equivalent Resistance Thermal Resistance VF IR VZ rZ RZ Rth(J-L) Conditions Min. Typ. Max. Unit IF = 2 A — — 1.20 V VR = 13 V — — 1 VR = 20 V — — 1 VR = 25 V — — 1 SJPZ-N33 1 6 .8 — 19.1 SJPZ-N18 2 5 .1 — 28.9 3 1 .0 — 35.0 SJPZ-N33 — 13 — SJPZ-N18 — 23 — — 29 — SJPZ-N33 — 2 — SJPZ-N18 — 4 — — 5 — — — 20 IZ = 1 mA IZ = 1 mA IZ = 10 mA to 20 mA (3) Remarks SJPZ-N18 µA V mV/°C Ω SJPZ-N27 SJPZ-N27 SJPZ-N27 SJPZ-N27 SJPZ-N33 °C/W Mechanical Characteristics Parameter Package Weight (3) Conditions Min. ― Typ. 0.072 Max. ― Unit g Rth(J-L) is thermal resistance between junction and lead. Lead temperature is measured as shown in Figure 1. SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 4 SJPZ-N Series SJPZ-N18 Rating and Characteristic Curves 10000 Peak Pulse Reverse Power, PRSM (W) 2.5 Power Dissipation, PD (W) 2.0 1.5 1.0 0.5 1000 100 0.0 0 25 50 75 100 125 10 150 0.1 1 Ambient Temperature, TA (°C) Figure 2. 10 100 Pulse Width, tP (ms) SJPZ-N18 Power Dissipation Curve(4) Figure 3. SJPZ-N18 Peak Pulse Reverse Power(5) 1000 Thermal Resistance (°C/W) Rth(J-A) 100 10 Rth(J-L) 1 0.1 10 m 100 m 1 10 100 1000 Pulse Width (s) Figure 4. SJPZ-N18 Typical Transient Thermal Resistance Characteristics (6) (4) See Figure 1 for the measurement conditions of the lead temperature. tP is single block pulse. (6) See Figure 1 for the measurement conditions of the lead temperature. (5) SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 5 SJPZ-N Series 10 1.E-03 Reverse Leakage Current, IR (A) Forward Current, IF (A) TA = 150 °C 1 0.1 TA = 100 °C TA = 25 °C 0.01 TA = −55 °C 0.001 1.E-04 1.E-05 1.E-06 TA = 150 °C 1.E-07 1.E-08 0.0 0.5 1.0 1.5 2.0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 Reverse Voltage, VR (V) Forward Voltage Drop, VF (V) Figure 5. SJPZ-N18 Typical Characteristics: IF vs. VF Figure 6. 20 1 Breakdown Voltage, VZ (V) Reverse Current, IZ (A) 10 SJPZ-N18 Typical Characteristics: IR vs. VR 0.1 0.01 0.001 10 15 20 25 30 19 18 17 16 -100 SJPZ-N18 Typical Characteristics: IZ vs. VZ (TJ = 25 °C, t = 0.4 ms) 100 200 Junction Temperature, TJ (°C) Breakdown Voltage, VZ (V) Figure 7. 0 Figure 8. SJPZ-N18 Typical Characteristics: VZ vs. TJ (IZ = 1 mA) SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 6 SJPZ-N Series SJPZ-N27 Rating and Characteristic Curves 2.5 Peak Pulse Reverse Power, PRSM (W) 10000 Power Dissipation, PD (W) 2.0 1.5 1.0 0.5 0.0 0 25 50 75 100 125 1000 100 150 10 Ambient Temperature, TA (°C) 0.1 1 10 100 Pulse Width, tP (ms) Figure 9. SJPZ-N27 Power Dissipation Curve(7) Figure 10. SJPZ-N27 Peak Pulse Reverse Power(8) 1000 Thermal Resistance (°C/W) Rth(J-A) 100 10 Rth(J-L) 1 0.1 10 m 100 m 1 10 100 1000 Pulse Width (s) Figure 11. SJPZ-N27 Typical Transient Thermal Resistance Characteristics (9) (7) See Figure 1 for the measurement conditions of the lead temperature. tP is single block pulse. (9) See Figure 1 for the measurement conditions of the lead temperature. (8) SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 7 SJPZ-N Series 10 1.E-03 TA = 150 °C Reverse Leakage Current, IR (A) Forward Current, IF (A) 1.E-04 1 0.1 TA = 100 °C TA = 25 °C 0.01 TA = −55 °C 0.001 1.E-05 1.E-06 TA = 150 °C 1.E-07 1.E-08 0.0 0.5 1.0 1.5 2.0 0 5 Forward Voltage Drop, VF (V) Figure 12. 10 15 20 Reverse Voltage, VR (V) SJPZ-N27 Typical Characteristics: IF vs. VF Figure 13. 10 SJPZ-N27 Typical Characteristics: IR vs. VR 31 1 Breakdown Voltage, VZ (V) Reverse Current, IZ (A) 30 0.1 0.01 29 28 27 26 25 0.001 20 25 30 35 40 24 -100 SJPZ-N27 Typical Characteristics: IZ vs. VZ (TJ = 25 °C, t = 0.4 ms) 100 200 Junction Temperature, TJ (°C) Breakdown Voltage, VZ (V) Figure 14. 0 Figure 15. SJPZ-N27 Typical Characteristics: VZ vs. TJ (IZ = 1 mA) SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 8 SJPZ-N Series SJPZ-N33 Rating and Characteristic Curves 10000 Peak Pulse Reverse Power, PRSM (W) 2.5 Power Dissipation, PD (W) 2.0 1.5 1.0 0.5 1000 100 0.0 0 25 50 75 100 125 150 10 0.1 1 Ambient Temperature, TA (°C) Figure 16. 10 100 Pulse Width, tP (ms) SJPZ-N33 Power Dissipation Curve(10) Figure 17. SJPZ-N33 Peak Pulse Reverse Power(11) 1000 Thermal Resistance (°C/W) Rth(J-A) 100 10 Rth(J-L) 1 0.1 10 m 100 m 1 10 100 1000 Pulse Width (s) Figure 18. SJPZ-N33 Typical Transient Thermal Resistance Characteristics(12) (10) See Figure 1 for the measurement conditions of the lead temperature. tP is single block pulse. (12) See Figure 1 for the measurement conditions of the lead temperature. (11) SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 9 SJPZ-N Series 10 1.E-03 Reverse Leakage Current, IR (A) Forward Current, IF (A) TA = 150 °C 1 0.1 TA = 100 °C TA = 25 °C 0.01 TA = −55 °C 0.001 1.E-04 1.E-05 1.E-06 TA = 150 °C 1.E-07 1.E-08 0.0 0.5 1.0 1.5 2.0 0 5 15 20 25 Reverse Voltage, VR (V) Forward Voltage Drop, VF (V) Figure 19. 10 SJPZ-N33 Typical Characteristics: IF vs. VF Figure 20. 10 SJPZ-N33 Typical Characteristics: IR vs. VR 37 Breakdown Voltage, VZ (V) Reverse Current, IZ (A) 36 1 0.1 0.01 35 34 33 32 31 0.001 25 30 35 40 45 30 -100 0 Figure 21. SJPZ-N33 Typical Characteristics: IZ vs. VZ (TJ = 25 °C, t = 0.4 ms) 100 200 Junction Temperature, TJ (°C) Breakdown Voltage, VZ (V) Figure 22. SJPZ-N33 Typical Characteristics: VZ vs. TJ (IZ = 1 mA) SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 10 SJPZ-N Series Physical Dimensions ● SJP Package 2.15 0.05 +0.1 -0.2 +0.1 -0.05 2.6±0.2 4.5±0.2 1.3±0.4 2.0min. 1.5±0.2 1.3±0.4 +0.4 5.0 -0.1 NOTES: - Dimensions in millimeters Bare lead frame: Pb-free (RoHS compliant) Moisture Sensitivity Level 1 (MSL 1) When soldering the products, it is required to minimize the working time within the following limits: Flow: 260 °C / 10 s, 1 time Reflow: Preheat: 150 °C to 200 °C / 60 s to 120 s Solder heating: 255 °C / 30s, 3 times (260 °C peak) Soldering Iron: 350 °C / 3.5 s, 1 time ● SJP Land Pattern Example 2.0 2.0 4.0 to 4.2 NOTE: - Dimensions in millimeters SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 11 SJPZ-N Series Marking Diagram Cathode Mark Specific Device Code (See Table 1) YMDD Lot Number: Y is the last digit of the year of manufacture (0 to 9) M is the month of the year (1 to 9, O, N or D) DD is the day of the month (01 to 31) Table 1. Specific Device Code Specific Device Code Part Number ZN18 SJPZ-N18 ZN27 SJPZ-N27 ZN33 SJPZ-N33 SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 12 SJPZ-N Series Important Notes ● All data, illustrations, graphs, tables and any other information included in this document (the “Information”) as to Sanken’s products listed herein (the “Sanken Products”) are current as of the date this document is issued. The Information is subject to any change without notice due to improvement of the Sanken Products, etc. Please make sure to confirm with a Sanken sales representative that the contents set forth in this document reflect the latest revisions before use. ● The Sanken Products are intended for use as components of electronic equipment or apparatus (transportation equipment and its control systems, home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Prior to use of the Sanken Products, please put your signature, or affix your name and seal, on the specification documents of the Sanken Products and return them to Sanken. If considering use of the Sanken Products for any applications that require higher reliability (traffic signal control systems or equipment, disaster/crime alarm systems, etc.), you must contact a Sanken sales representative to discuss the suitability of such use and put your signature, or affix your name and seal, on the specification documents of the Sanken Products and return them to Sanken, prior to the use of the Sanken Products. The Sanken Products are not intended for use in any applications that require extremely high reliability such as: aerospace equipment; nuclear power control systems; and medical equipment or systems, whose failure or malfunction may result in death or serious injury to people, i.e., medical devices in Class III or a higher class as defined by relevant laws of Japan (collectively, the “Specific Applications”). Sanken assumes no liability or responsibility whatsoever for any and all damages and losses that may be suffered by you, users or any third party, resulting from the use of the Sanken Products in the Specific Applications or in manner not in compliance with the instructions set forth herein. ● In the event of using the Sanken Products by either (i) combining other products or materials or both therewith or (ii) physically, chemically or otherwise processing or treating or both the same, you must duly consider all possible risks that may result from all such uses in advance and proceed therewith at your own responsibility. ● Although Sanken is making efforts to enhance the quality and reliability of its products, it is impossible to completely avoid the occurrence of any failure or defect or both in semiconductor products at a certain rate. You must take, at your own responsibility, preventative measures including using a sufficient safety design and confirming safety of any equipment or systems in/for which the Sanken Products are used, upon due consideration of a failure occurrence rate and derating, etc., in order not to cause any human injury or death, fire accident or social harm which may result from any failure or malfunction of the Sanken Products. Please refer to the relevant specification documents and Sanken’s official website in relation to derating. ● No anti-radioactive ray design has been adopted for the Sanken Products. ● The circuit constant, operation examples, circuit examples, pattern layout examples, design examples, recommended examples, all information and evaluation results based thereon, etc., described in this document are presented for the sole purpose of reference of use of the Sanken Products. ● Sanken assumes no responsibility whatsoever for any and all damages and losses that may be suffered by you, users or any third party, or any possible infringement of any and all property rights including intellectual property rights and any other rights of you, users or any third party, resulting from the Information. ● No information in this document can be transcribed or copied or both without Sanken’s prior written consent. ● Regarding the Information, no license, express, implied or otherwise, is granted hereby under any intellectual property rights and any other rights of Sanken. ● Unless otherwise agreed in writing between Sanken and you, Sanken makes no warranty of any kind, whether express or implied, including, without limitation, any warranty (i) as to the quality or performance of the Sanken Products (such as implied warranty of merchantability, and implied warranty of fitness for a particular purpose or special environment), (ii) that any Sanken Product is delivered free of claims of third parties by way of infringement or the like, (iii) that may arise from course of performance, course of dealing or usage of trade, and (iv) as to the Information (including its accuracy, usefulness, and reliability). ● In the event of using the Sanken Products, you must use the same after carefully examining all applicable environmental laws and regulations that regulate the inclusion or use or both of any particular controlled substances, including, but not limited to, the EU RoHS Directive, so as to be in strict compliance with such applicable laws and regulations. ● You must not use the Sanken Products or the Information for the purpose of any military applications or use, including but not limited to the development of weapons of mass destruction. In the event of exporting the Sanken Products or the Information, or providing them for non-residents, you must comply with all applicable export control laws and regulations in each country including the U.S. Export Administration Regulations (EAR) and the Foreign Exchange and Foreign Trade Act of Japan, and follow the procedures required by such applicable laws and regulations. ● Sanken assumes no responsibility for any troubles, which may occur during the transportation of the Sanken Products including the falling thereof, out of Sanken’s distribution network. ● Although Sanken has prepared this document with its due care to pursue the accuracy thereof, Sanken does not warrant that it is error free and Sanken assumes no liability whatsoever for any and all damages and losses which may be suffered by you resulting from any possible errors or omissions in connection with the Information. ● Please refer to our official website in relation to general instructions and directions for using the Sanken Products, and refer to the relevant specification documents in relation to particular precautions when using the Sanken Products. ● All rights and title in and to any specific trademark or tradename belong to Sanken and such original right holder(s). DSGN-AEZ-16003 SJPZ-N-DSE Rev.1.5 SANKEN ELECTRIC CO., LTD. Mar. 09, 2021 https://www.sanken-ele.co.jp/en © SANKEN ELECTRIC CO., LTD. 2016 13