SML10051_08

5-1-2 Bicolor lamps ■5φ Round Bicolor LEDs SML10051 Series Forward Voltage Part Number Emitting Color A: Red B: Green Lens Color Diffused white TYP 1.9 2.0 VF (V) MAX 2.5 2.5 Conditions IF (mA) 10 10 Luminous Intensity Peak Wavelength Iv Conditions (mcd) IF (mA) TYP 40 20 60 20 λP Conditions (nm) IF (mA) TYP 630 10 560 10 Dominant Wavelength Spectrum Half Bandwidth λd Conditions (nm) IF (mA) TYP 620 10 567 10 ∆λ Conditions (nm) IF (mA) TYP 35 10 20 10 Chip Material Remark SML12451W GaAsP Cathode common GaP Directional Characteristics (representative example) External Dimensions Resin burr 0.3max Resin heap1.5max ø5.0±0.2 (Unit: mm) Dimensional Tolerance: ± 0.3 11.6±0.5 B 0° A 30° 60° 30° 60° (2.0) 9.6±0.2 0.8 1.2 0.65max 3 – 0.5±0.1 3 – 0.5±0.1 1.0min 1.5min 17.0min (2.54) (2.54) 90° 100% 50 0 50 90° 100% 0.5±0.1 Internal Circuit Drawing Product Mass: Approx. 0.36 g 246 LEDs 5-1 Visible Light LEDs Absolute Maximum Ratings ●Visible Light Unicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C Ratings GaP GaAsP 75 30 −0.45 100 3 −30 to +85 −30 to +100 5 −30 to +80 70 GaAlAs AlGaInP InGaN 120 25°C or higher f=1kHz, tw≤100 µ s GaN Conditions ●Visible Light Bicolor Lamp Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C GaP GaAsP 75 Ratings GaAlAs 30 −0.45 100 4 −30 to +85 −30 to +100 5 AlGaInP InGaN 120 Conditions Same conditions for simultaneous lighting 25°C or higher f=1kHz, tw≤100 µ s ●Visible Light Unicolor Surface Mount LEDs Parameter IF ∆IF IFP VR Top Tstg Unit mA mA/°C mA V °C °C Ratings GaP GaAsP 30 −0.45 100*1 3 −30 to +85 −30 to +100 5 −30 to +80 *1: 70mA for SEC1005/1007 Series *2: 50mA for SEC1005/1007 Series GaAlAs AlGaInP InGaN 20 −0.27 70*2 GaN Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Bicolor Surface Mount LEDs Ratings Parameter PD IF ∆IF IFP VR Top Tstg Unit mW mA mA/°C mA V °C °C SEC2002/2004 75 (Same conditions for simultaneous lighting) 30 −0.45 70 4 −30 to +85 −30 to +100 Conditions 25°C or higher f=1kHz, tw≤100 µs ●Visible Light Three Element Surface Mount LEDs Parameter Unit Red PD IF ∆IF IFP VR Top Tstg mW mA mA/°C mA V °C °C 75 30 −0.45 70 5 −30 to +80 −30 to +100 50 Ratings SECT3M02C-S Green/Blue 120 When one chip lights up (same as green/blue for simultaneous lighting) 25°C or higher f=1kHz, tw≤100 µs Conditions 218 LEDs