STR-L451

STR-L400 Series Power IC for Quasi-Resonant Type Switching Power Supply with High Efficiency, Low Noise Low-Height, and Enough Creepage Isolation (>6mm) between High and Low Voltage Terminals ■ General Descriptions The STR-L400 series products are power ICs for quasi-resonant switching type power supplies, incorporating a power MOSFET and a controller IC in the SIP-10 package. The product achieves high efficiency and low noise power supply systems by the quasi-resonant operation. The product is recommended for the systems requiring low-height and enough clearance and creepage isolation between high and low voltage terminals. SIP-10 ■ Features
Quasi-Resonant Operation
Current-Mode Control
Built-in Oscillator for Low Frequency Operation The operation with low frequency of 50µs OFF time (around 22 kHz), until the quasi-resonant signal becomes valid, reduces the stress on components at startup and load-shorted.
SIP-10 Package (Sanken designation: STA-10L), recommended for auxiliary power supplies of White Goods. Straight lead pitch: 2.54mm, Height over PCB: < 12mm Clearance and Creepage Isolation on PCB between high and low voltage terminals: 6.5mm (4 pins removed)
Input Compensation at Overcurrent The function reduces the distortion of overcurrent operation point to AC input voltage change by adding three components.
Built-in Avalanche Energy Guaranteed High-Voltage Power MOSFET
Various Protections Overcurrent Protection (OCP)---------------------------------- Pulse-by-Pulse Overload Protection (OLP) ------------------------------------- Latch Shutdown Thermal Shutdown Protection (TSD) ------------------------- Latch Shutdown ■ Applications Switching Power Supplies for Standby Power Supplies, Home Appliances (White Goods), Digital Consumer Equipment, OA Equipment, Industry Machines, Communication Devices, Others ■ Product Lineup MOSFET RDS(ON) MAX VDSS MIN(V) (Ω) STR-L451 650 3.95 STR-L472 900 7.7 Product No ■ Typical Application Circuit VAC VOUT STR-L400 1 2 3 4 8 GND Vcc D Cont． OCP /FB 9 S 6 GND GND 10 7 ■ Package Information SIP-10 （Sanken designation : STA-10L） ） Dimensions between roots Dimensions between roots Warning
The contents in this document are subject to changes, for improvement and other purposes, without notice. Make sure that this is the latest version of the document before use.
The operation and circuit examples in this document are provided for reference purposes only. Sanken assumes no liability for violation of industrial property, intellectual property, or other rights of Sanken or third parties, that stem from these examples.
The user must take responsibility for considering and determining which objects the products in this document are used with.
Although Sanken will continue to improve the quality and reliability of its products, semiconductor products, by their nature, have certain fault and failure rates. The user must take responsibility for designing and checking to secure the device and system so that a part failure may not lead to human injury, fire, damages, or other losses.
The contents in this document must not be transcribed or copied without Sanken’s written consent. SANKEN ELECTRIC CO.,LTD.