CPH3216

Ordering number:ENN6405A PNP/NPN Epitaxial Planar Silicon Transistors CPH3116/CPH3216 DC/DC Converter Applications Applications · Relay drivers, lamp drivers, motor drivers. Package Dimensions unit:mm 2150A [CPH3116/CPH3216] 0.4 3 2.9 Features · Adoption of MBIT processes. · Large current capacitance. · Low collector-to-emitter saturation voltage. · High-speed switching. · Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm). · High allowable power dissipation. 0.6 0.05 1 1.9 2 0.2 0.6 1.6 2.8 Specifications ( ) : CPH3116 Absolute Maximum Ratings at Ta = 25˚C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCES VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2×0.8mm) 1 : Base 2 : Emitter 3 : Collector SANYO : CPH3 Conditions 0.7 0.9 Ratings (–50)80 (–50)80 (–)50 (–)5 (–)1.0 (–)3 (–)200 0.9 150 –55 to +150 0.2 0.15 Unit V V V V A A mA W ˚C ˚C Electrical Characteristics at Ta = 25˚C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=(–)40V, IE=0 VEB=(–)4V, IC=0 VCE=(–)2V, IC=(–)100mA VCE=(–)10V, IC=(–)300mA VCB=(–)10V, f=1MHz 200 420 (9)6 Conditions Ratings min typ max (–)0.1 (–)0.1 560 MHz pF Unit µA µA Marking : CPH3116 : AR, CPH3216 : CR Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 83100TS (KOTO)/21000TS (KOTO) TA-2706 No.6405–1/5 CPH3116/CPH3216 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat)1 VCE(sat)2 VBE(sat) Conditions IC=(–)500mA, IB=(–)10mA IC=(–)300mA, IB=(–)6mA IC=(–)500mA, IB=(–)10mA (–50) 80 (–)50 80 (–)50 (–)5 35 (170) 330 (30)40 Ratings min typ (–280) 130 (–145) 90 (–)0.81 max (–430) 190 (–220) 135 (–)1.2 Unit mV mV mV mV V V V V V V V ns ns ns ns V(BR)CBO IC=(–)10µA, IE=0 V(BR)CES IC=(–)100µA, RBE=0 V(BR)CEO IC=(–)1mA, RBE=∞ V(BR)EBO IE=(–)10µA, IC=0 ton tstg tf See specified test circuit. See specified test circuit. See specified test circuit. Switching Time Test Circuit PW=20µs D.C.≤1% Input VR 50Ω + 100µF + 470µF IB1 IB2 (For PNP, the polarity is reversed.) RB RL –5V 25V 20IB1= –20IB2= IC=500mA --1000 IC -- VCE CPH3116 --5 0 mA 0 --4 mA --30 mA 1000 IC -- VCE 40mA 30mA m --20 A 800 Collector Current, IC – A Collector Current, IC – A --800 A --10m --8mA --6mA 20mA 10mA 8mA 50mA 6mA --600 --4mA --2mA 600 4mA 2mA --400 400 --200 200 0 0 --0.2 --0.4 --0.6 --0.8 IB=0 --1.0 IT01643 0 0 CPH3216 0.2 0.4 0.6 0.8 IB=0 1.0 IT01644 Collector-to-Emitter Voltage, VCE – V --1.0 --0.9 --0.8 Collector-to-Emitter Voltage, VCE – V 1.0 0.9 0.8 IC -- VBE CPH3116 VCE=--2V Collector Current, IC – A IC -- VBE CPH3216 VCE=2V Collector Current, IC – A --0.7 --0.6 --0.5 --0.4 --0.3 --0.2 --0.1 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 IT01645 0.7 0.6 0.5 0.4 0.3 C 25°C --25°C Ta=7 5° 0.1 0 0 0.2 0.4 Ta=7 5 0.6 0.2 °C 25°C --25°C 0.8 1.0 1.2 IT01646 Base-to-Emitter Voltage, VBE – V Base-to-Emitter Voltage, VBE – V No.6405–2/5 CPH3116/CPH3216 1000 7 5 3 2 hFE -- IC CPH3116 VCE=--2V 1000 7 5 3 2 hFE -- IC Ta=75°C CPH3216 VCE=2V Ta=75°C DC Current Gain, hFE DC Current Gain, hFE --25°C --25°C 25°C 25°C 100 7 5 3 2 100 7 5 3 2 10 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 10 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC – A 5 3 IT01647 5 3 Collector Current, IC – A IT01648 f T -- IC Gain-Bandwidth Product, f T – MHz CPH3116 VCE=--10V f T -- IC Gain-Bandwidth Product, f T – MHz 2 2 1000 7 5 3 2 100 7 5 3 CPH3216 VCE=10V 1000 7 5 3 2 100 7 5 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC – A 100 7 IT01649 100 7 Cob -- VCB Collector Current, IC – A IT01650 Cob -- VCB CPH3216 f=1MHz CPH3116 f=1MHz Output Capacitance, Cob – pF 3 2 Output Capacitance, Cob – pF 5 5 3 2 10 7 5 3 2 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 5 7 --100 IT01651 10 7 5 3 2 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 IT01652 Collector-to-Base Voltage, VCB – V --1.0 7 VCE(sat) -- IC Collector-to-Base Voltage, VCB – V 1.0 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) – V 5 3 2 Collector-to-Emitter Saturation Voltage, VCE(sat) – V CPH3116 IC / IB=20 7 5 3 2 CPH3216 IC / IB=20 --0.1 7 5 3 2 0.1 7 5 3 2 Ta °C =75 C --25° C 25° 7 Ta= 5°C °C 25 C --25° 2 3 5 7 0.1 --0.01 --0.01 2 3 5 7 --0.1 2 3 5 Collector Current, IC – A --1.0 IT01653 7 0.01 0.01 2 3 5 Collector Current, IC – A 7 1.0 IT01654 No.6405–3/5 CPH3116/CPH3216 --1.0 7 VCE(sat) -- IC CPH3116 IC / IB=50 1.0 7 VCE(sat) -- IC CPH3216 IC / IB=50 Collector-to-Emitter Saturation Voltage, VCE(sat) – V 3 2 Collector-to-Emitter Saturation Voltage, VCE(sat) – V 5 5 3 2 --0.1 7 5 3 2 7 Ta= --25° C 5°C 0.1 7 5 3 2 25° C 75°C Ta= --25° C 25° C --0.01 --0.01 2 3 5 7 --0.1 2 3 5 Collector Current, IC – A --10 7 --1.0 IT01655 7 0.01 0.01 2 3 5 7 0.1 2 3 5 Collector Current, IC – A 10 7 1.0 IT01656 VBE(sat) -- IC CPH3116 IC / IB=50 VBE(sat) -- IC CPH3216 IC / IB=50 7 Base-to-Emitter Saturation Voltage, VBE(sat) – V Base-to-Emitter Saturation Voltage, VBE(sat) – V 5 3 2 5 3 2 --1.0 7 5 3 2 Ta= --25°C 75°C 25°C 1.0 7 5 3 2 Ta= --25°C 75°C 25°C --0.1 --0.01 2 3 5 7 --0.1 2 3 5 Collector Current, IC – A 10 7 5 --1.0 IT01657 7 0.1 0.01 2 3 5 7 0.1 2 3 5 Collector Current, IC – A 1.4 7 1.0 IT01658 ASO CPH3116/CPH3216 PC -- Ta CPH3116/CPH3216 1.0 7 5 3 2 0.1 7 5 3 2 IC=1A Collector Dissipation, PC – W Collector Current, IC – A 3 2 ICP=3A 1.2 10 s 0µ µs 0 50 1m 1.0 0.9 0.8 s M ou 10 10 DC 0m s op er ati on Ta=25°C Single pulse m nte s do na ce 0.6 ram ic bo ard 0.4 (60 0m m2 ×0 Mounted on a ceramic board(600mm2×0.8mm) 0.2 0 .8m m) 160 0.01 0.1 For PNP, minus sign is omitted. 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 0 20 40 60 80 100 120 140 Collector-to-Emitter Voltage, VCE – V IT01659 Ambient Temperature, Ta – °C IT01660 No.6405–4/5 CPH3116/CPH3216 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of August, 2000. Specifications and information herein are subject to change without notice. PS No.6405–5/5