MCH3143

Ordering number : ENN8209 MCH3143 / MCH3243 MCH3143 / MCH3243 Applications • PNP / NPN Epitaxial Planar Silicon Transistors DC / DC Converter Applications Relay drivers, lamp drivers, motor drivers, flash. Features • • • • • • Adoption of MBIT processes. High current capacitance. Low collector-to-emitter saturation voltage. High-speed switching. Ultrasmall package permitting applied sets to be small and slim (mounting height : 0.85mm). High allowable power dissipation. Specifications ( ) : MCH3143 Absolute Maximum Ratings at Ta=25°C Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg Mounted on a ceramic board (600mm2!0.8mm) Conditions Ratings (--)15 (--12)15 (--)5 (--)2.5 (--)5 (--)500 0.8 150 --55 to +150 Unit V V V A A mA W °C °C Electrical Characteristics at Ta=25°C Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob Conditions VCB=(--)12V, IE=0 VEB=(--)4V, IC=0 VCE=(--)2V, IC=(-)100mA VCE=(--)2V, IC=(-)300mA VCB=(--)10V, f=1MHz 200 370 (22)16 Ratings min typ max (--)0.1 (--)0.1 560 MHz pF Unit µA µA Marking : MCH3143 : AG, MCH3243 : CQ Continued on next page. Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 12805EA TS IM TB-00001030 No.8209-1/5 MCH3143 / MCH3243 Continued from preceding page. Parameter Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time Symbol VCE(sat) VBE(sat) V(BR)CBO V(BR)CEO V(BR)EBO ton tstg tf Conditions IC=(--)1A, IB=(--)50mA IC=(--)1A, IB=(--)50mA IC=(--)10µA, IE=0 IC=(--)1mA, RBE=∞ IE=(-)10µA, IC=0 See specified Test Circuit. See specified Test Circuit. See specified Test Circuit. (--15) (--12)15 (--)5 (35)30 (110)180 (15)13 Ratings min typ (--90)100 (--)0.89 max (--135)150 (--)1.2 Unit mV V V V V ns ns ns Package Dimensions unit : mm 2194A 0.25 0.3 3 0.15 Switching Time Test Circuit PW=20µs D.C.≤1% INPUT IB1 OUTPUT IB2 VR 50Ω RB=1kΩ 2.1 1.6 RL 0.25 0.65 2.0 (Bottom view) 0.07 2 1 + 220µF VBE= --5V 3 + 470µF VCC=5V 1 : Base 2 : Emitter 3 : Collector 1 2 (Top view) 0.85 IC=20IB1= --20IB2=1A For PNP, the polarity is reversed. SANYO : MCPH3 --40mA --2.0 --1.8 IC -- VCE --2 0 --3 40mA 30mA Collector Current, IC -- A Collector Current, IC -- A --1.6 --50mA mA --10mA 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 10 A 15mA 0m -- 2.0 1.8 IC -- VCE m 8mA 6mA --1.4 --1.2 --1.0 --0.8 --0.6 --0.4 --0.2 0 0 --8mA --6mA --4mA --2mA A 20 mA 4mA 2mA MCH3143 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4 --1.6 IB=0 --1.8 --2.0 IT09063 0 0 MCH3243 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 IB=0 1.8 2.0 IT09064 Collector-to-Emitter Voltage, VCE -- V --2.50 --2.25 Collector-to-Emitter Voltage, VCE -- V 2.50 2.25 IC -- VBE MCH3143 VCE= --2V Collector Current, IC -- A IC -- VBE MCH3243 VCE=2V Collector Current, IC -- A --2.00 --1.75 --1.50 --1.25 2.00 1.75 1.50 1.25 Ta=7 5°C 25°C C 25°C --25°C --0.75 --0.50 --0.25 0 0 --0.2 --0.4 0.75 0.50 0.25 --0.6 --0.8 --1.0 IT09065 0 0 0.2 0.4 0.6 Ta=75 ° 0.8 --25°C --1.00 1.00 1.0 IT09066 Base-to-Emitter Voltage, VBE -- V Base-to-Emitter Voltage, VBE -- V No.8209-2/5 MCH3143 / MCH3243 1000 7 5 hFE -- IC MCH3143 VCE= --2V DC Current Gain, hFE 1000 7 5 hFE -- IC MCH3243 VCE=2V DC Current Gain, hFE Ta=75°C 25°C 3 2 Ta=75°C 25°C --25°C 3 --25°C 2 100 7 5 --0.01 100 7 0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A 1000 IT09067 1000 f T -- IC Collector Current, IC -- A IT09068 f T -- IC Gain-Bandwidth Product, f T -- MHz Gain-Bandwidth Product, f T -- MHz 7 5 MCH3143 VCE= --2V 7 5 MCH3243 VCE=2V 3 2 3 2 100 7 5 3 0.01 100 7 5 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Collector Current, IC -- A 7 IT09069 7 Cob -- VCB Collector Current, IC -- A IT09070 Cob -- VCB MCH3143 f=1MHz Output Capacitance, Cob -- pF Output Capacitance, Cob -- pF 5 5 MCH3243 f=1MHz 3 3 2 2 10 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 2 3 10 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 Collector-to-Base Voltage, VCB -- V 3 2 IT09071 5 3 VCE(sat) -- IC Collector-to-Base Voltage, VCB -- V IT09072 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V MCH3143 IC / IB=20 MCH3243 IC / IB=20 2 --0.1 7 5 0.1 7 5 3 2 = Ta 3 2 °C 75 -- °C 25 25 °C °C 75 C a= T 5° °C 2 25 -- 0.01 7 5 --0.01 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 3 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A IT09073 Collector Current, IC -- A IT09074 No.8209-3/5 MCH3143 / MCH3243 3 VBE(sat) -- IC Base-to-Emitter Saturation Voltage, VBE(sat) -- V Base-to-Emitter Saturation Voltage, VBE(sat) -- V 2 MCH3143 IC / IB=20 3 VBE(sat) -- IC MCH3243 IC / IB=20 2 --1.0 7 5 Ta= --25°C 75°C 25°C 1.0 7 5 Ta= --25°C 75°C 25°C 3 3 2 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 2 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 Collector Current, IC -- A --10 7 5 3 2 --1.0 7 5 3 2 --0.1 7 5 3 2 IT09075 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2 2 3 ASO Collector Current, IC -- A IT09076 ASO ICP= --5A s m 10