SBE002

Ordering number:ENN6343 Schottky Barrier Diode SBE002 50V, 1A Rectifier Applications · High frequency rectification (switching regulators, converters, choppers). Package Dimensions unit:mm 1295 [SBE002] 2.9 6 5 4 0.6 0.05 1.6 2.8 0.15 · Low forward voltage (VF max=0.55V). · Fast reverse recovery time (trr max=10ns). · Low switching noise. · Low leakage current and high reliability due to highly reliable planar structure. · Ultrasmall package, permitting SBE002-applied sets to be compact and slim (mounting height 0.9mm). · Large allowable power dissipation. 1 2 0.4 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Junction Temperature Storage Temperature Symbol VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1 cycle Conditions 0.7 0.9 0.2 3 0.95 0.6 1 : Cathode 2 : Cathode 3 : No Contact 4 : Anode 5 : Cathode 6 : Cathode SANYO : CPH6 Ratings 50 55 1 10 –55 to +125 –55 to +125 0.2 Features Unit V V A A ˚C ˚C Electrical Characteristics at Ta = 25˚C Parameter Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time Thermal Resistance Symbol VR VF IR C trr Rthj-a IR=300µA IF=1A VR=25V VR=10V, f=1MHz IF=IR=100mA, See specified Test Circuit. Mounted on a ceramic board (600mm2×0.8mm) Conditons Ratings min 50 0.55 80 52 10 110 typ max Unit V V µA pF ns ˚C/W Marking : SD Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft’s control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN O0899GI (KT) No.6343–1/3 SBE002 trr Specified Test Circuit Duty≤10% 100mA 10mA trr 10µs 5V 100mA 50Ω 100Ω 10Ω 10 7 5 IF -- VF 10 5 3 2 IR -- VR 5 Ta=12 °C Forward Current, IF -- A 3 2 Reverse Current, IR -- mA Ta 1.0 7 5 3 2 0.1 7 5 0 0.2 0.4 2 =1 C 5° °C 25 1.0 5 3 2 0.1 5 3 2 0.01 5 3 2 100°C 75°C 50°C 25°C 0.6 0.8 1.0 1.2 IT00608 0.001 5 0 10 20 30 40 50 60 IT00609 Forward Voltage, VF -- V Average Forward Power Dissipation, PF(AV) -- W 1.4 PF(AV) -- IO Interterminal Capacitance, C -- pF Reverse Voltage, VR -- V 5 C -- VR 1.2 ⁄Rectangular wave θ=60° ¤Rectangular wave θ=120° ‹Rectangular wave θ=180° ›Sine wave θ=180° Rectangular wave f=1MHz 3 2 1.0 0.8 › θ 360° ‹ 100 7 5 3 2 ¤ ⁄ 0.6 0.4 Sine wave 0.2 180° 0 0 0.2 0.4 0.6 0.8 1.0 360° 1.2 1.4 IT00610 10 1.0 2 3 5 7 10 2 3 5 Average Forward Current, IO -- A 14 IS -- t IS Reverse Voltage, VR -- V 7 100 IT00611 Surge Forward Current , IFSM(Peak) -- A Current waveform 50Hz sine wave 12 10 20ms t 8 6 4 2 0 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Time, t -- s IT00612 No.6343–2/3 SBE002 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of October, 1999. Specifications and information herein are subject to change without notice. PS No.6343–3/3