SPM3204

Ordering number : ENN0000 SPM3204 SPM3204 RF Switch MMIC Features • • • • • • Package Dimensions unit : mm 1297 [SPM3204] 0.15 6 5 4 1.25 2.1 0 to 0.1 0.2 0.25 0.425 Control voltage +3 / 0V. MCP package. Low Insertion loss. High isolation. High linearity. Low VSWR. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Control Voltage Power Dissipation Storage Temperature Operating Temperature Symbol VCTL PD Tstg Topg Ratings 0.9 0.2 0.425 12 0.65 2.0 3 1 : CTL2 2 : IN 3 : CTL1 4 : OUT1 5 : GND 6 : OUT2 SANYO : MCP6 Unit 5.0 150 −55 to +150 −20 to +70 V mW °C °C Electrical Characteristics at Ta=25°C Parameter Control Voltage 1, 2 : 0 / +3V Conditions f=1GHz Rathing min typ 0.55 0.6 0.65 21 17 15 24 20 18 1.1 20 26 30 1.5 100 ns dBm max 0.85 0.9 0.95 Unit dB dB dB dB dB dB Insertion Loss IN -- OUT1, IN -- OUT2 f=2GHz f=2.5GHz f=1GHz Isolation VSWR Switching Time PIN1dB IN -- OUT1, IN -- OUT2 IN -- OUT1, IN -- OUT2 IN -- OUT1, IN -- OUT2 f=2GHz f=2.5GHz f=1GHz to 2.5GHz f=1GHz to 2.5GHz f=1GHz to 2.5GHz Marking : MM4 CTL1 +3V 0 CTL2 0V +3V IN ➝ OUT1 IN ➝ OUT2 Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN GI IM No.0000-1/3 SPM3204 Application Circuit CTL2 1 C IN 6 5 4 C OUT2 2 3 C OUT1 Zo = 50Ω) CTL1 ( C : at 0.8 to 1.5GHz 33pF at 1.9 to 2.5GHz 10pF 0.8 Insertion Loss -- Frequency Vct1+3 / 0, Pin= +10dBm 25 20 Isolation -- Frequency Vct1+3 / 0, Pin= +10dBm 0.7 20 20 Insertion Loss (dB) 0.6 Isolation (dB) 20 20 19 18 0.5 0.4 17 16 0.3 0.5 1.0 1.5 2.0 2.5 3.0 IT02475 15 0.5 1.0 1.5 2.0 2.5 3.0 IT02476 Frequency (GHz) 30 Frequency (GHz) 160 Output Power -- Input Power Allowable Power Dissipation, PD -- mW PD -- Ta 0 / 3V, f=1.0 to 2.5GHz 25 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 140 160 Output Power (dBm) 20 15 10 5 0 0 5 10 15 20 25 30 IT02477 Input Power (dBm) Ambient Temperature, Ta -- °C IT02653 No.0000-2/3 SPM3204 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of Feburuary, 1999. Specifications and information herein are subject to change without notice. PS No.0000-3/3