SS0310M

Ordering number : ENN8373 SS0310M SS0310M Applications • Schottky Barrier Diode 100V, 0.3A Rectifier High frequency rectification (switching regulators, converters, choppers). Features • • • Low Switching noise. Low forward voltage (IF=0.3A, VF max=0.57V). Ultrasmall package permitting SS0310M applied sets to be made small and slim. Specifications Absolute Maximum Ratings at Ta=25°C Parameter Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Average Output Current Surge Forward Current Junction Temperature Storage Temperature Symbol VRRM VRSM IO IFSM Tj Tstg 50Hz sine wave, 1 cycle Conditions Ratings 100 100 0.3 10 --55 to +125 --55 to +125 Unit V V A A °C °C Electrical Characteristics at Ta=25°C Parameter Reverse Voltage Forward Voltage Reverse Current Interterminal Capacitance Reverse Recovery Time Thermal Resistance Symbol VR VF IR C trr Rth(j-a)1 Rth(j-a)2 IR=0.5mA IF=0.3A VR=50V VR=10V, f=1MHz IF=IR=100mA, See specified Test Circuit. Mounted in Cu-foiled area of 0.72mm2!0.03mm on glass epoxy board Mounted on a ceramic board (1000mm !0.8mm) 2 Conditions Ratings min 100 0.52 20 10 94.7 67.7 0.57 600 typ max Unit V V µA pF ns °C / W °C / W Marking : SH Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Co.,Ltd. Semiconductor Company TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 63005SB MS IM TB-00001534 No.8373-1/3 SS0310M Package Dimensions unit : mm 7019-001 Bottom View 0.3 Electrical Connection 3 0.25 0.15 1 : Anode 2 : No Contact 3 : Cathode 1 2 3 Top view 2.1 1.6 0.25 0.65 2.0 0.07 2 1 3 1 : Anode 2 : No Contact 3 : Cathode 1 2 Top View 0.85 SANYO : MCPH3 trr Test Circuit Duty≤10% 100mA 100mA 10mA 50Ω 10µs 100Ω 10Ω --5V trr 1.0 7 5 3 2 0.1 7 5 3 2 0.01 7 5 IF -- VF Forward Current, IF -- A 10 0 1 Ta= °C C 25° 0.001 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 --25°C 3 2 100000 5 2 10000 5 2 1000 5 2 100 5 2 10 5 2 1.0 5 2 0.1 5 2 0.01 0 IR -- VR Ta=125°C 100°C 75°C Reverse Current, IR -- µA 50°C 25°C 0°C 25°C 5 0°C 75 °C 0°C --25°C 20 40 60 80 100 120 IT09595 Forward Voltage, VF -- V 2 IT09594 Average Forward Power Dissipation, PF(AV) -- W C -- VR Reverse Voltage, VR -- V 0.30 PF(AV) -- IO Interterminal Capacitance, C -- pF 100 7 5 0.25 (1)Rectangular wave θ=60° (2)Rectangular wave θ=120° (3)Rectangular wave θ=180° (4)Sine wave θ=180° (1) (2) (4) (3) 0.20 3 2 0.15 Rectangular wave θ 360° 0.10 10 7 5 0.1 2 3 5 7 1.0 2 3 5 7 10 2 3 5 7 100 IT09597 Sine wave 0.05 180° 0 0 0.05 0.10 0.15 0.20 0.25 360° 0.30 0.35 Reverse Voltage, VR -- V Average Output Current, IO -- A IT09596 No.8373-2/3 SS0310M 14 IFSM -- t Current waveform 50Hz sine wave IS 20ms t Surge Forward Current, IFSM(Peak) -- A 12 10 8 6 4 2 0 7 0.01 2 3 5 7 0.1 2 3 5 7 1.0 2 3 Time, t -- s ID00435 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer’s products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer’s products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of June, 2005. Specifications and information herein are subject to change without notice. PS No.8373-3/3