CPH3209-TL-E

Ordering number : EN6078C CPH3109/CPH3209 Bipolar Transistor http://onsemi.com (–)30V, (–)3A, Low VCE(sat), (PNP)NPN Single CPH3 Applications • Relay drivers, lamp drivers, motor drivers, strobes Features • • • • • • Adoption of MBIT processes Large current capacity Low collector-to-emitter saturation voltage High-speed switching Ultrasmall package facilitates miniaturization in end products (mounting height : 0.9mm) High allowable power dissipation Specifications ( ): CPH3109 Absolute Maximum Ratings at Ta=25°C Parameter Symbol Collector-to-Base Voltage Conditions Ratings Unit VCBO VCEO (--30)40 V (--)30 V (--)5 V (--)3 A Collector Current (Pulse) VEBO IC ICP Base Current IB Collector Dissipation Junction Temperature PC Tj Storage Temperature Tstg Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current (--)5 A (--)600 When mounted on ceramic substrate (600mm2×0.8mm) mA 0.9 W 150 °C --55 to +150 °C Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. Package Dimensions Product & Package Information unit : mm (typ) 7015A-003 • Package : CPH3 • JEITA, JEDEC : SC-59, TO-236, SOT-23 • Minimum Packing Quantity : 3,000 pcs./reel 0.6 2.9 CPH3109-TL-E CPH3209-TL-E 0.15 Packing Type: TL Marking LOT No. CJ LOT No. AJ 0.05 1.6 2.8 0.2 3 0.9 0.2 0.6 TL 1 0.95 2 0.4 1 : Base 2 : Emitter 3 : Collector CPH3 CPH3109 3 1 CPH3109 Semiconductor Components Industries, LLC, 2013 September, 2013 CPH3209 Electrical Connection 3 1 2 CPH3209 2 70412 TKIM/63004 TSIM TB-00000279/31201 KT/41000 TS (KOTO) TA-1721 No.6078-1/7 CPH3109 / CPH3209 Electrical Characteristics at Ta=25°C Parameter Symbol Collector Cutoff Current ICBO IEBO VCB=(--)30V, IE=0A VEB=(--)4V, IC=0A Gain-Bandwidth Product hFE fT VCE=(--)2V, IC=(--)500mA VCE=(--)10V, IC=(--)500mA Output Capacitance Cob VCB=(--)10V, f=1MHz IC=(--)1.5A, IB=(--)30mA Emitter Cutoff Current DC Current Gain VCE(sat)1 Collector-to-Emitter Saturation Voltage Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-On Time Storage Time Fall Time Ratings Conditions min typ Unit max 200 (--)0.1 μA (--)0.1 μA 560 (380)450 MHz (25)20 pF (--155)120 (--230)180 mV mV VCE(sat)2 VBE(sat) IC=(--)1.5A, IB=(--)75mA (--)105 (--)155 IC=(--)1.5A, IB=(--)30mA (--)0.83 (--)1.2 V(BR)CBO V(BR)CEO IC=(--)10μA, IE=0A IC=(--)1mA, RBE=∞ V(BR)EBO ton IE=(--)10μA, IC=0A tstg tf See specified Test Circuit. V (--30)40 V (--)30 V (--)5 V (50)30 ns (270)300 ns (25)15 ns Switching Time Test Circuit IB1 PW=20μs DC≤1% OUTPUT INPUT RB VR OUTPUT RB VR + 100μF IB2 INPUT 24Ω + 50Ω IB1 PW=20μs DC≤1% IB2 24Ω + 50Ω 470μF + 100μF VBE=5V VCC= --12V --20IB1=20IB2= IC= --500mA CPH3109 470μF VBE= --5V VCC=12V 20IB1= --20IB2= IC=500mA CPH3209 Ordering Information Package Shipping memo CPH3109-TL-E CPH3 3,000pcs./reel Pb Free CPH3209-TL-E CPH3 3,000pcs./reel Pb Free IC -- VCE A --10m --1.6 --1.2 Collector Current, IC -- A --8mA --6mA --4mA --0.8 --2mA 1.6 1.2 A 20m A 0m --2 --50mA Collector Current, IC -- A --30mA --40mA IC -- VCE 2.0 CPH3109 mA 10 6mA A 8m 4mA 50mA --2.0 40mA 30m A Device 0.8 2mA 0.4 --0.4 IB=0 0 0 --200 --400 --600 --800 Collector-to-Emitter Voltage, VCE -- mV --1000 IT08069 CPH3209 IB=0 0 0 200 400 600 800 Collector-to-Emitter Voltage, VCE -- mV 1000 IT08070 No.6078-2/7 CPH3109 / CPH3209 IC -- VBE --2.5 --2.0 --1.5 25°C --25°C --0.5 --0.2 --0.4 --0.6 --0.8 --1.0 Base-to-Emitter Voltage, VBE -- V 2.0 1.5 1.0 --1.2 0 7 5 3 2 25°C 7 5 3 2 5 7 --0.1 2 3 5 7 --1.0 2 3 Collector Current, IC -- A 3 5 7 0.1 3 2 100 7 5 3 2 3 5 7 1.0 2 3 5 7 10 IT08074 CPH3209 VCE=10V 7 Gain-Bandwidth Product, f T -- MHz 5 2 f T -- IC 1000 CPH3109 VCE= --10V 7 5 3 2 100 7 5 3 2 10 2 3 5 7 --100 2 3 5 7 --1000 2 Collector Current, IC -- mA 3 10 2 3 5 7 100 2 3 5 7 1000 2 Collector Current, IC -- mA IT08075 Cob -- VCB 2 3 IT08076 Cob -- VCB 2 CPH3109 f=1MHz Output Capacitance, Cob -- pF CPH3209 f=1MHz 100 7 5 3 2 10 --1.0 2 Collector Current, IC -- A f T -- IC 1000 10 --10 10 0.01 5 7 --10 IT08073 --25°C 100 2 3 1.2 IT08072 CPH3209 VCE=2V 5 3 2 1.0 7 DC Current Gain, hFE 100 10 --0.01 0.8 Ta=75°C 25°C --25°C 2 0.6 hFE -- IC 1000 Ta=75°C 3 0.4 Base-to-Emitter Voltage, VBE -- V CPH3109 VCE= --2V 7 5 0.2 IT08071 hFE -- IC 1000 DC Current Gain, hFE 2.5 0 0 Gain-Bandwidth Product, f T -- MHz 3.0 0.5 0 Output Capacitance, Cob -- pF CPH3209 VCE=2V 3.5 Collector Current, IC -- A --3.0 Ta=7 5°C Collector Current, IC -- A --3.5 --1.0 IC -- VBE 4.0 CPH3109 VCE= --2V Ta=75°C 25°C --25°C --4.0 100 7 5 3 2 10 2 3 5 7 --10 2 Collector-to-Base Voltage, VCB -- V 3 5 IT08077 1.0 2 3 5 7 10 2 Collector-to-Base Voltage, VCB -- V 3 5 IT08078 No.6078-3/7 CPH3109 / CPH3209 VCE(sat) -- IC Collector-to-Emitter Saturation Voltage, VCE(sat) -- V CPH3109 IC / IB=20 3 2 --0.1 7 5 5°C 7 Ta= 3 2 C 25° -- --0.01 7 5 C 25° 3 2 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT08079 Collector Current, IC -- A Collector-to-Emitter Saturation Voltage, VCE(sat) -- V 2 --1.0 7 5 3 2 --0.1 7 5 C 75° °C Ta= --25 3 2 C 25° 0.01 7 5 3 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 CPH3109 IC / IB=50 5 2 Ta= --25°C 7 25°C 75°C 3 2 --0.1 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 2 3 5 7 10 IT08080 3 2 1.0 7 5 3 2 0.1 7 5 5°C 7 Ta= --25 C 25° 3 2 3 5 7 0.1 2 3 °C 5 7 1.0 2 3 5 7 10 IT08082 VBE(sat) -- IC CPH3209 IC / IB=50 5 3 2 1.0 Ta= --25°C 7 75°C 5 25°C 3 2 2 3 5 7 0.1 2 3 5 7 1.0 2 3 5 7 10 IT08084 Collector Current, IC -- A PC -- Ta 1.0 CPH3109/CPH3209 ICP=5A s 0μ 50 s 10 ms 10 DC s 0μ 1m 1.0 7 5 0.9 10 IC=3A 0m s op era 3 2 tio n CPH3109/CPH3209 Ta=25°C Single pulse Mounted on a ceramic board(600mm2×0.8mm) For PNP, minus sign is omitted. 2 5 7 1.0 CPH3209 IC / IB=50 0.1 0.01 ASO 0.01 0.1 3 Collector Current, IC -- A 5 7 --10 IT08083 Collector Current, IC -- A 3 2 2 7 3 5 5 7 0.1 10 7 --1.0 3 VCE(sat) -- IC 0.01 0.01 5 7 --10 IT08081 VBE(sat) -- IC --10 2 2 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V C 75° Ta= °C --25°C 25 3 2 Collector Current, IC -- A Base-to-Emitter Saturation Voltage, VBE(sat) -- V Collector-to-Emitter Saturation Voltage, VCE(sat) -- V CPH3109 IC / IB=50 --0.01 --0.01 Collector Current, IC -- A 0.1 7 5 10 7 5 3 3 2 3 2 0.001 0.01 VCE(sat) -- IC --10 7 5 0.1 7 5 CPH3209 IC / IB=20 2 --0.001 --0.01 10 7 5 VCE(sat) -- IC 1.0 7 5 Collector Dissipation, PC -- W Collector-to-Emitter Saturation Voltage, VCE(sat) -- V --1.0 7 5 3 5 7 1.0 2 3 5 7 10 M 0.8 ou nt ed on ac er 0.6 am ic bo ar 0.4 d( 60 0m m2 ×0 .8 0.2 m m ) 0 2 Collector-to-Emitter Voltage, VCE -- V 3 5 IT08085 0 20 40 60 80 100 120 Ambient Temperature, Ta -- °C 140 160 IT08086 No.6078-4/7 CPH3109 / CPH3209 Embossed Taping Specification CPH3109-TL-E, CPH3209-TL-E No.6078-5/7 CPH3109 / CPH3209 Outline Drawing CPH3109-TL-E, CPH3209-TL-E Land Pattern Example Mass (g) Unit 0.013 mm * For reference Unit: mm 2.4 1.4 0.6 0.95 0.95 No.6078-6/7 CPH3109 / CPH3209 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No.6078-7/7