SB10-03A-2

Ordering number : EN2929A SB10-03A2, SB10-03A3 Schottky Rectifier, 30V, 1A http://onsemi.com Applications • High frequency rectification (switching regulators, converters, choppers) Features • • • • Low forward voltage (VF max=0.55V) Fast reverse recovery time (trr max=30ns) Low switching noise Average rectified current(Io=1.0A) Specifications Absolute Maximum Ratings at Ta=25°C Parameter Symbol Conditions Ratings Unit Repetitive Peak Reverse Voltage VRRM 30 V Nonrepetitive Peak Reverse Surge Voltage VRSM 35 V 1.0 A 1.0 A SB10-03A2 50Hz,resistive load,sine wave, Ta=50°C Average Rectified Current IO (L=8mm,10×10mm² print land) SB10-03A3 50Hz,resistive load,sine wave, Ta=46°C (L=3mm,5×5mm² print land) Junction Temperature IFSM Tj Storage Temperature Tstg Surge Forward Current 50Hz sine wave, 1 cycle 40 A 125 °C --40 to +125 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Electrical Characteristics at Ta=25°C Parameter Forward Voltage Reverse Current Reverse Recovery Time Thermal Resistance(Junction-Ambient) Symbol VF IR trr Rth(j-a) Conditions IF=1.0A VR=30V IF=1A, -di/dt=50A/µs No fin,device only Ratings min typ max Unit 0.55 V 1.0 mA 30 ns 140 °C / W Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Package Dimensions Package Dimensions unit : mm (typ) SB10-03A2 unit : mm (typ) SB10-03A3 Semiconductor Components Industries, LLC, 2013 July, 2013 O0797GI/D198TA,TS No. A2929-1/3 SB10-03A2/SB10-03A3 No. A2929-2/3 SB10-03A2/SB10-03A3 ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PS No. A2929-3/3