FMAC-091D-5510

3-Phase Filters FMAC ECO www.schurter.com/pg80 Ultra compact and efficient 1-stage filter in ECO design for 3-phase systems Description - High attenuation value - Cost optimized filter design with excellent price / perfomance ratio - Very light due to partial potting Applications Standards Approvals - Voltage rating 480 VAC for world wide acceptance - Especially designed for industrial applications such as: Frequency Converters, Stepper Motor Drives, UPS-Systems, Inverters - Qualified for use in equipment according IEC/EN 60950 - IEC 60939 - UL 1283 - VDE License Number: pending - UL License Number: pending References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check Technical Data Rated Current Rated voltage Approval for 16 - 150 A @ Ta 40 °C 480 VAC, 50/60 Hz 16 - 150 A @ Ta 40 °C / 480 VAC; 50/60 Hz Overload Current 1.5 x Ir Leakage Current < 33 mA (440 V / 50 Hz) Dielectric Strength for 480 VAC > 2.25 kVDC between L-L > 3 kVDC between L-PE Test voltage 2 sec Number of Filter Stages 1 Weight 1 - 7 kg Sealing Compound UL 94V-0 Mounting Terminal Operating Temperature [°C] Climatic Category Degree of Protection Protection Class MTBF Screw-on mounting on chassis, upright or lengthwise Screw terminals -25 °C to 100 °C 25/100/21 acc. to IEC 60068-1 IP 20 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 > 200'000 h acc. to MIL-HB-217 F EMC Products  FMAC ECO www.schurter.com/pg80 Dimensions Case 1C 3-Phase Filters max. 250 (199) (23) (17) max. 70 M5x13; 2.0-2.5 Nm (62) (32) (242) 235 –2 4.3±0.3 2) 5.4±0.3 4 mm2; 0.5-0.6 Nm 221 –2 +0 +0 max. 45.5 38±0.3 25 ±0.3 1) 1) Line 2) Load Case 1D-6 max. 265 +0 235 –2 max. 58 (10) (23) (199) 5.4±0.3 M6x14; 3-4 Nm max. 90 60 ±0.3 (80) (44) (15) 255 –2 7.8±0.3 +0 30 ±0.3 35±0.3 6 mm2: 1.5-1.8 Nm 1) Line 2) Load  EMC Products (32.5) (4x) (M5+DIN9021) 1) 2) 3-Phase Filters FMAC ECO www.schurter.com/pg80 Case 1D-10 max. 265 +0 235 –2 max. 58 (10) (23) (199) 5.4±0.3 M6x14; 3-4 Nm max. 90 60 ±0.3 (80) (44) (15) 255 –2 7.8±0.3 +0 30 ±0.3 35±0.3 10 mm2: 1.5-1.8 Nm 1) Line 2) Load Case 1E max. 265 255 –2 (200) +0 (32.5) (4x) (M5+DIN9021) 1) 2) max. 141 (117) (10) max. 58 4.5±0.3 35 ±0.3 1) 2) 25 mm2 (18) (11) (36) 235 –2 +0 (15) 4.5±0.3 2-2.5 Nm 110±0.3 M6; 3-4 Nm 1) Line 2) Load EMC Products 3 FMAC ECO www.schurter.com/pg80 Case 1T max. 320 (240) max. 80 (42) 3-Phase Filters M6x14; 3-4 Nm (100) (48) (10.5) (270) 6.5±0.3 255 –2 +0 25 mm2: 4-4.5 Nm 60±0.3 1) 2) 1) Line 2) Load Case 1G max. 330 (240) max. 90 M10; 10-17 Nm 3) 3) max. 150 (108) (60) (59) (85) (270) 255 –2 6.5±0.3 +0 50 mm2: 6-8 Nm 65±0.3 1) 2) 1) Line 2) Load 3) Do not unscrew lock-nut, keep lock-nut fastened while tightening  EMC Products max. 135 (26) 3-Phase Filters FMAC ECO www.schurter.com/pg80 L [mH] 0.55 0.48 0.55 0.45 0.57 0.55 0.65 0.75 0.55 C [μF] 6.6 6.6 2.2 2.2 2.2 4.7 4.7 4.7 4.7 C [μF] 6.6 6.6 2.2 2.2 2.2 4.7 3.3 3.3 4.7 C3 [μF] 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 R [MΩ] R [MΩ] 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Filter-Type Industrial Version Industrial Version Industrial Version Industrial Version Industrial Version Industrial Version Industrial Version Industrial Version Industrial Version Technical data to the filter components Rated Current [A] 110 150 16 25 36 43/80 50 55 64 Diagrams 1) 2) 1) Line 2) Load Attenuation Loss 16A (FMAC-091C-1610) Industrial Version - - - - differential mode _____ common mode 25A (FMAC-091C-2510) 36A (FMAC-091D-3610) 50A (FMAC-091D-5010) 55A (FMAC-091D-5510) 64A (FMAC-091E-6410) 80A (FMAC-091T-8010) 110A (FMAC-091G-H110) 150A (FMAC-091G-H210) EMC Products  FMAC ECO www.schurter.com/pg80 Variants Rated Current @ Ta 0°C (7°C) [A] 16 25 36 50 55 64 43/80 110 150 Characteristic Rated Voltage [VAC] Tripped Po- Leakage Curwer Dissipa- rent [mA] ) tion [W] 6 8 10 13 14 17 22 28 40 96 96 96 103 103 103 110 110 110 Contact Resistance [mΩ] 7.6 4.1 2.5 1.7 1.5 1.4 1.1 0.8 0.6 Weight [kg] Screw clamps [mm] ) 3-Phase Filters Housing Order Number High attenuation High attenuation High attenuation High attenuation High attenuation High attenuation High attenuation High attenuation High attenuation 480 480 480 480 480 480 480 480 480 1 1 1.3 1.7 1.7 2 5.1 5.8 7 4 4 6 10 10 25 25 50 50 1C 1C 1D-6 1D-10 1D-10 1E 1T 1G 1G FMAC-091C-1610 FMAC-091C-2510 FMAC-091D-3610 FMAC-091D-5010 FMAC-091D-5510 FMAC-091E-6410 FMAC-091T-8010 FMAC-091G-H110 FMAC-091G-H210 2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm² values can be found in the general product information www.schurter.com/ emc_info 1) Worst case leakage current acc. to IEC60950 - Annex G4 (situation with two interrupted lines). Nominal leakage current acc. to IEC60950 - 5.2.5. can be found in section technical data. Packaging unit 1 Pcs  The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.