FMBC-0996-8000

3-Phase Filters FMBC ECO www.schurter.com/pg80 Ultra compact and efficient 2-stage filter in ECO design for 3-phase systems Description - High attenuation value - Cost optimized filter design with excellent price / perfomance ratio - Very light due to partial potting Applications Standards Approvals - Voltage rating 480 VAC for world wide acceptance - Especially designed for industrial applications such as: Frequency Converters, Stepper Motor Drives, UPS-Systems, Inverters - Qualified for use in equipment according IEC/EN 60950 - IEC 60939 - UL 1283, Edition 5, CSA 22.2 No. 8-M1986, @ Ta 40 °C - VDE License Number: 40023521 References Weblinks General Product Information Approvals, RoHS, CHINA-RoHS, e-Store, Distributor-Stock-Check Technical Data Rated Current Rated voltage Approval for 10 - 115 A 480 VAC, 50/60 Hz 10 - 115 A @ Ta 40 °C / 480 VAC; 50/60 Hz Overload Current 1.5 x Ir Leakage Current industrial < 5 mA (440 V / 50 Hz) Dielectric Strength for 480 VAC > 2.25 kVDC between L-L > 3 kVDC between L-PE Number of Filter Stages 2 Weight 1.1 - 5 kg Material: Housing Alu. anodised Sealing Compound UL 94V-0 Mounting Terminal Operating Temperature [°C] Climatic Category Degree of Protection Protection Class MTBF Screw-on mounting on chassis, upright or lengthwise Screw terminals -25 °C to 100 °C 25/100/21 acc. to IEC 60068-1 IP 20 acc. to IEC 60529 Suitable for appliances with protection class 1 acc. to IEC 61140 > 200'000 h acc. to MIL-HB-217 F Dimensions Case 94 255 max. +0 240 -2 50 max. (14.5) (1) (220) 6.5 ±0.3 1) 2) (12) (12) 1) Line 2) Load 25 ±0.3 EMC Products 101 max. 0.5...0.6 Nm 76 ±0.3 (20)  FMBC ECO www.schurter.com/pg80 Case 95 340 max. 314 300 +0 -2 3-Phase Filters 65 max. (15) (1) 1) 2) 6.5 ±0.3 (12) (10) 1) Line 2) Load 45 ±0.3 Case 96 340 max. 314 -2 (300) +0 80 max. (18.5) (1) 2.0...2.5 Nm 110 ±0.3 1) 2) 150 max. 55 ±0.3 90 max. (32) 65 ±0.3 155 max. (36) 6.5 ±0.3 (20) (12) 1) Line 2) Load Case 97 6.5 ±0.3 379 max. 319 +0 -2 (30) (1) 3.2...3.7 Nm ±0.3 1) 2) (15 ) 364 +0 -2 1) Line 2) Load (14) (9) (12) 130  EMC Products (30) (12) 135 max. 1.2...1.4 Nm 110 ±0.3 (29) 3-Phase Filters FMBC ECO www.schurter.com/pg80 L [mH] 2.3 1.5 0.9 0.45 0.45 0.32 0.24 C [μF] 1 1 1 1 1 1 1 C [μF] 1 1 1 1 1 1 2.2 C3 [μF] 1 1 2.2 2.2 2.2 2.2 2.2 C4 [nF] 10 10 47 47 47 47 100 R [MΩ] 1 1 1 1 1 1 1 R [MΩ] 1 1 2.2 2.2 2.2 2.2 2.2 Technical data to the filter components Rated Current [A] 10 20 36 50 66 80 115 Diagrams 1) 2) 1) Line 2) Load Attenuation Loss 10A (FMBC-0994-1000) Industrial Version - - - - differential mode _____ common mode 20A (FMBC-0994-2000) 36A (FMBC-0995-3600) 50A (FMBC-0996-5000) 66A (FMBC-0996-6600) 80A (FMBC-0996-8000) 115A (FMBC-0997-H115) Variants Rated Current @ Ta 40°C (75°C) [A] 10 20 36 50 66 80 115 Characteristic High attenuation High attenuation High attenuation High attenuation High attenuation High attenuation High attenuation Tripped Power Dissipation [W] 4 9 5 20 22 24 36 Contact Resistance [mΩ] 37 20 3.5 7.5 4.5 3.5 2.5 Leakage Current 5 5 7.5 7.5 7.5 7.5 15.0 Weight [kg] 1.1 1.6 2.2 2.7 3.4 3.4 5 Screw clamps [mm] ) 10 10 16 16 25 25 35 Housing 94 94 95 95 96 96 97 Order Number FMBC-0994-1000 FMBC-0994-2000 FMBC-0995-3600 FMBC-0995-5000 FMBC-0996-6600 FMBC-0996-8000 FMBC-0997-H115 2) Maximum conductor cross section (wire gauge) to be used; a comparative table for AWG and mm² values can be found in the general product information www.schurter. com/emc_info 1) Worst case leakage current acc. to IEC60950 - Annex G4 (situation with two interrupted lines). Nominal leakage current acc. to IEC60950 - 5.2.5. can be found in section technical data. EMC Products 3 FMBC ECO www.schurter.com/pg80 Packaging unit 1 Pcs 3-Phase Filters 4 The specifications, descriptions and illustrations indicated in this document are based on EMC Products current information. All content is subject to modifications and amendments.