RBV803S

D10SB10 ~ D10SB100 Elektronische Bauelemente 100 V ~ 1000 V 10.0 Amp High Current Glass Passivated Molding Single-Phase Bridge Rectifier RoHS Compliant Product A suffix of “-C” specifies halogen-free and RoHS Compliant D5-25SB FEATURES        Plastic Package has Underwriters Laboratory Flammability Classification 94V-0 This Series is UL listed under the Recognized Component index, file number E231047 Single-in-line package High current capacity with small package Superior thermal conductivity High temperature soldering guaranted： 260°C / 10 seconds R A High IFSM GB N O P SLL MD H C J F K E REF. A B C D E G J F Millimeter Min. Max. 29.7 30.3 19.7 20.3 4.4 4.8 17.0 18.0 0.6 0.8 5 REF. 3.4 3.8 3.3 3.7 REF. K L N P O R S H Millimeter Min. Max. 2.6 2.8 7.3 7.7 2.3 2.7 0.9 1.1 2.0 2.4 3 X 45° 9.8 10.2 10.8 11.2 MAXIMUM RATINGS (TA=25℃ unless otherwise noted) PART NUMBERS PARAMETERS SYMBOL D10SB D10SB D10SB D10SB D10SB D10SB 10 20 40 60 80 100 RBV 1002S 100 RBV 803S 200 RBV 804S 400 10 500 10 (1) 3.4 (2) 200 1.1 2.5 22 (2) 3.4 (1) 150 , -40 ~ 150 Rating Torque：0.8N.m RBV 805S 600 RBV 806S 800 RBV 1007S 1000 UNITS Maximum repetitive voltage Maximum DC reverse current at @TA=25°C rated DC blocking voltage @TA=125°C Average rectified forward @TC=100°C current 60Hz Sine wave @TA=25°C Resistance load Peak Forward Surge Current 10ms single half sine-wave superimposed on rated load Maximum Instantaneous Forward Voltage @ 3.0A Dielectric strength terminals to case, AC 1 minute Current 1mA Maximum thermal on P.C.B without heat-sink Resistance per leg on AI plate heat-sink Operating and Storage Temperature Range Mounting torque VRM IR V A A IO IFSM VF Vdia RθJA RθJC TJ , TSTG Tor A V KV °C / W °C N.m Notes： (1) Unit case mounted on AI plate heat-sink (2) Unites mounted on P.C.B. without heat-sink (3) Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw {heat-sink size：10.5 * 8.2 * 0.3cm} http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 06-Aug-2010 Rev. A Page 1 of 2 D10SB10 ~ D10SB100 Elektronische Bauelemente 100 V ~ 1000 V 10.0 Amp High Current Glass Passivated Molding Single-Phase Bridge Rectifier CHARACTERISTIC CURVES http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. 06-Aug-2010 Rev. A Page 2 of 2