RS403L

RS401L THRU RS407L Elektronische Bauelemente VOLTAGE 50V ~ 1000V 4.0 AMP Glass Passivated Bridge Rectifiers RoHS Compliant Product A suffix of “-C” specifies halogen-free. RS-4L FEATURES .580(14.7) .540(13.7) . Surge Overload rating – 125 amperes peak . Ideal for printed circuit board . Plastic material has underwrites laboratory . Polarity: marked on body . Mounting position: Any . Weight: 4.8 grams Flammability classification 94V-0 + - .640(16.3) .600(15.2) .052(1.3) .048(1.2) DIA. .083 (2.1) .750 MIN. (19.0) .220(5.6) S P AC ING .180(4.6) .256(6.5) .236(6.0) .768(19.5) .728(18.5) Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature unless otherwise specified. Resistive or inductive load, 60Hz, For capacitive load, derate current by 20%. O TYPE NUMBER RS401L Maximum Recurrent Peak Reverse Voltage 50 Working Peak Reverse Voltage 35 Maximum DC Blocking Voltage 50 Maximum Average Forward Output Current at TA = 50 ( Note 1 ) Peak Forward Surge Current, 8.3 ms single half Sine-wave superimposed on rated load (JEDEC method) Maximum Forward Voltage Drop per Element at 2.0A Peak Maximum DC Reverse Current at Rated DC Blocking Voltage Maximum DC Reverse Current at Rated DC Blocking Voltage and TA = 150 Operating and Storage Temperature Range TJ, TSTG Note: 1. Mounting conditions, 0.5” lead length maximum. RS402L 100 70 100 RS403L 200 140 200 RS404L 400 280 400 4.0 125 1.1 10.0 1.0 -55 ~ +150 RS405L 600 420 600 RS406L 800 560 800 RS407L 1000 700 1000 UNITS V V V A A V µA mA http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 1 of 2 RS401L THRU RS407L Elektronische Bauelemente VOLTAGE 50V ~ 1000V 4.0 AMP Glass Passivated Bridge Rectifiers RATING AND CHARACTERISTIC CURVES ( RS401L THRU RS407L ) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 6 5 4 3 2 1 0 Single Phase Half Wave 60Hz Resistive Or Inductive Load FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT,(A) 250 AVERAGE FORWARD CURRENT,(A) 200 150 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 100 50 0 25 50 75 100 125 150 175 CASE TEMPERATURE,( C) 0 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL FORWARD CHARACTERISTICS 50 INSTANTANEOUS FORWARD CURRENT,(A) FIG.4-TYPICAL REVERSE CHARACTERISTICS 50 3.0 1.0 Tj=25 C Pulse Width 300us 1% Duty Cycle REVERSE LEAKAGE CURRENT, ( A) 10 10 3.0 1.0 Tj=100 C 0.1 0.1 Tj=25 C .01 0 .2 .4 .6 .8 1.0 1.2 1.4 .01 0 20 40 60 80 100 120 140 FORWARD VOLT AGE,(V) PERCENT OF RATED PEAK REVERSE VOLT AGE, (%) http://www.SeCoSGmbH.com/ 01-Jun-2002 Rev. A Any changing of specification will not be informed individual Page 2 of 2