SR16200

SR16200 Elektronische Bauelemente VOLTAGE 200V 16.0AMP Schottky Barrier Rectifiers RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free TO-220 .412 (10.5) MAX. .108 (2.75) 3.8 f +.2 HOLE THRU .180 (4.6) .050 (1.27) FEATURES * Low forward voltage drop * High current capability * High reliability * High surge current capability * Epitaxial construction .248 (6.3) .595 (15.1) MAX. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Lead solderable per MIL-STD-202, method 208 guaranteed * Polarity: As Marked * Mounting position: Any * Weight: 2.24 grams(Approximately) .051 MAX. (1.3) .040 MAX. (1.0) .100 (2.54) PIN 1 PIN 3 Positive CT Suffix "C" .550 (14.0) .158 (4.0) MIN. MAX. .120 (3.05) + CASE PIN 2 PIN 1 PIN 3 Negative CT Suffix "A" CASE PIN 2 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Working Peak Reverse Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage (IF = 8 Amps,T = 25 C) F Maximum Instantaneous Forward Voltage (IF = 8 Amps,T = 125 C) F Maximum DC Reverse Current at Rated DC Blocking Voltage Typical Junction Capacitance (Note1) Typical Thermal Resistance RθJC (Note 2) Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: SR16200 200 200 200 16 180 0.91 0.75 0.02 10 350 2.0 -5 0 ~ +150 -65 ~ +175 UNITS V V V A A V mA mA pF C/W C C Ta=25 C Ta=125 C 1. Measured at 1MHz and applied reverse voltage of 5.0V D.C. 2. Thermal Resistance Junction to Case. http://www.SeCoSGmbH.com Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 1 of 2 SR16200 Elektronische Bauelemente VOLTAGE 200V 16.0AMP Schottky Barrier Rectifiers RATING AND CHARACTERISTIC CURVES (SR16200) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE I F(AV),AVERAGE POWER DISSIPATION(WATTS) IF(AV) ,INSTANEOUS FORWAED CURRENT(AMP) 90 60 40 FIG.2- TYPICAL FORWARD VOLTAGE (PER LEG) 19 16 13 11 9 7 0 70 80 90 100 110 120 130 SQUARE WAVE RATED VOLTAGE R q JC = 2° C/W Tj=150 C 16 Tj=125 C dc 8 4 Tj=100 C 140 150 160 180 Tc,CASE TEMPERATURE,( C) 1 0 TJ = 25Tj=25 C C 0.2 0.4 0.6 0.8 1.0 FIG.3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 250 PEAK FORWARD SURGE CURRENT,(A) VF ,INSTANTANEOUS VOLTAGE(VOLTS) 200 100,000 Tj=25 C 8.3ms Single Half FIG.5-TYPICAL REVERSE CURRENT(PER LEG) 150 Tj=150 C I R , REVERSE CURRENT( m A) 100 Sine Wave JEDEC method 10,000 Tj=125 C 50 1,000 Tj=100 C 0 1 10 50 100 100 NUMBER OF CYCLES AT 60Hz 10 Tj=25 C 1 FIG.4-TYPICAL JUNCTION CAPACITANCE 700 600 VR , REVERSE CURRENT (VOLTS) 500 400 Tj=25 C 0 0 20 40 60 80 100 120 140 160 180 200 JUNCTION CAPACITANCE,(pF) 300 200 100 0 1 2 5 10 50 100 REVERSE VOLTAGE,(V) http://www.SeCoSGmbH.com Any changing of specification will not be informed individua l 01-Jun-2002 Rev. A Page 2 of 2