SR1640

SR1620 THRU SR16100 Elektronische Bauelemente VOLTAGE 20V ~ 100V 16.0AMP Schottky Barrier Rectifiers RoHS Compliant Product A suffix of "-C" specifies halogen & lead-free TO-220 .412 (10.5) MAX. 3.8 f +.2 HOLE THRU .180 (4.6) .050 (1.27) FEATURES * Low forward voltage drop * High current capability * High reliability * High surge current capability * Epitaxial construction .108 (2.75) .248 (6.3) .595 (15.1) MAX. MECHANICAL DATA * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Lead: Lead solderable per MIL-STD-202, method 208 guaranteed * Polarity: As Marked * Mounting position: Any * Weight: 2.24 grams .051 MAX. (1.3) .040 MAX. (1.0) .100 (2.54) PIN 1 PIN 3 .550 (14.0) .158 (4.0) MIN. MAX. .120 (3.05) + CASE PIN 2 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature unless otherwise specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current See Fig. 1 Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 8.0A Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage Typical Junction Capacitance (Note1) Typical Thermal Resistance RθJC (Note 2) Operating Temperature Range TJ Storage Temperature Range TSTG NOTES: SR1620 SR1630 SR1640 SR1660 SR1680 SR16100 UNITS 20 14 20 30 21 30 40 28 40 16 60 42 60 80 56 80 100 70 10 0 V V V A 1 30 0.57 10 10 0 70 0 -50 -65 4 60 3.0 +125 +150 0.68 100 0.82 A V mA mA pF C/W C C Ta=100 C 2 80 1. Measured at 1MHz and applied reverse voltage of 4.0V D.C. 2. Thermal Resistance Junction to Case. http://www.SeCoSGmbH.com Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 1 of 2 SR1620 THRU SR16100 Elektronische Bauelemente VOLTAGE 20V ~ 100V 16.0AMP Schottky Barrier Rectifiers RATING AND CHARACTERISTIC CURVES (SR1620 THRU SR16100) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) FIG.2-TYPICAL FORWARD CHARACTERISTICS 12 SR 16 20 ~S R1 64 0 10 50 INSTANTANEOUS FORWARD CURRENT,(A) 8 680 SR1 166 ~SR 620 SR1 16 6 2 0 0 20 40 60 80 100 120 140 160 180 200 1.0 Tj=25 C Pulse Width 300µs 1% Duty Cycle CASE TEMPERATURE,( C) FIG.3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 250 0.1 PEAK FORWARD SURGE CURRENT,(A) 200 .01 .1 .3 .5 .7 SR 4 16 5.0 80 ~S SR R1 6 10 .9 61 0 00 161 ~SR 00 0 1.1 1.3 1.5 FORWARD VOLT AGE,(V) 150 Tj=25 C 8.3ms Single Half Sine Wave SR 164 0 100 SR 162 0~ JEDEC method 50 SR1 660 ~SR 161 00 FIG.5 - TYPICAL REVERSE CHARACTERISTICS 5 10 50 100 0 1 100 NUMBER OF CYCLES AT 60Hz FIG.4-TYPICAL JUNCTION CAPACITANCE 2800 2400 2000 1600 1200 SR16 60 SR JUNCTION CAPACITANCE,(pF) REVERSE LEAKAGE CURRENT, (mA) 10 1.0 Tj=75 C 16 2 0~S R1 64 0 Tj=25 C .1 800 SR16 400 0 80~S R 16100 .01 .05 .1 .5 1 5 10 50 100 .01 0 20 40 60 80 100 120 140 REVERSE VOLTAGE,(V) PERCENT OF RATED PEAK REVERSE VOLT AGE,(%) http://www.SeCoSGmbH.com Any changing of specification will not be informed individual 01-Jun-2002 Rev. A Page 2 of 2