2N2484

LAB NPN SILICON AMPLIFIER TRANSISTOR MECHANICAL DATA Dimensions in mm (inches) SEME 2N2484 5.84 (0.230) 5.31 (0.209) 4.95 (0.195) 4.52 (0.178) FEATURES • SILICON PLANAR EPITAXIAL NPN TRANSISTOR 0.48 (0.019) 0.41 (0.016) dia. 2.54 (0.100) Nom. 3 2 1 TO18 PIN 1 = Emitter PIN 2 = Base 12.7 (0.500) min. 5.33 (0.210) 4.32 (0.170) PIN 3 = Collector ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise stated) VCBO VCEO VEBO IC PD PD TSTG , TJ Collector – Base Voltage Collector – Emitter Voltage Emitter – Base Voltage Collector Current Continuous Total Device Dissipation Total Device Dissipation @ TA =25°C Derate above 25°C @ TC =25°C Derate above 25°C Operating and Storage Temperature Range 60V 60V 6V 50mA 360mW 2.06mW / °C 1.2W 6.85mW / °C –65 to +200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document. 2359 Issue 1 LAB ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) Parameter OFF CHARACTERISTICS V(BR)CBO* Collector – Base Breakdown Voltage V(BR)CEO V(BR)EBO ICBO IEBO VCE(sat) VBE(on) Emitter – Base Breakdown Voltage Collector Cut-off Current Emitter Cut-off Current SEME 2N2484 Test Conditions IC = 10mA IE = 10mA IB = 0 IE = 0 IC = 0 IE = 0 TA = 150°C VBE = 5V IC = 0 IB = 0.1mA VCE = 5V VCE = 5V VCE = 5V TA = 55°C VCE = 5V VCE = 5V VCE = 5V VCE = 5V VCE = 5V VCE = 5V IE = 0 IC = 0.5mA Min. 60 60 6 Typ. Max. Unit Collector – Emitter Breakdown Voltage IC = 10mA VCB = 45V V 10 10 10 0.25 0.35 0.7 500 — nA nA V V mA ON CHARACTERISTICS Collector – Emitter Saturation Voltage IC = 1mA Base – Emitter On Voltage IC = 1mA IC = 0.1mA 0.5 30 100 20 175 200 250 0.65 190 250 40 275 300 350 400 800 IC = 10mA hFE DC Current Gain IC = 100mA IC = 500mA IC = 1mA IC = 10mA SMALL SIGNAL CHARACTERISTICS IC = 0.05mA fT Current Gain Bandwidth Product f = 5MHz IC = 0.05mA f = 30MHz Cobo Cibo hie hre hfe hoe Output Capacitance Input Capacitance Input Impedance Voltage Feedback Ratio Small Signal Current Gain Small Signal Current Gain IC = 1.0mA f = 1.0KHz VCB = 5V f = 140KHz 15 60 50 MHz 100 3 4 6 6 24 800 900 40 pF kW x 10-6 — 3.5 VCE = 5V 150 mmhos Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document. 2359 Issue 1 LAB ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) Parameter SMALL SIGNAL CHARACTERISTICS SEME 2N2484 Test Conditions IC = 10mA RS = 10KW BW = 20Hz IC = 10mA RS = 10KW VCE = 5V f = 1.0kHz VCE = 5V f = 10kHz VCE = 5V VCE = 5V f = 100Hz Min. Typ. Max. Unit 8.0 10 3.0 dB 2.0 NF Noise Figure BW = 200Hz IC = 10mA RS = 10KW BW = 2.0kHz IC = 10mA RS = 10KW BW = 15.7kHz f = 10Hz to 15.7kHz 3.0 THERMAL CHARACTERISTICS Parameter RqJC RqJA(1) TL Thermal Resistance, Junction to Case Thermal Resistance, Junction to Case Lead Temperature 1/16 from Case for 10 seconds * Pulse Test: tp £ 300ms, d £ 2%. Test Conditions Min. Typ. Max. Unit 146 485 300 °C/W °C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document. 2359 Issue 1