2N3635

2N3635 MECHANICAL DATA Dimensions in mm (inches) 8.51 (0.34) 9.40 (0.37) PNP SILICON TRANSISTOR 7.75 (0.305) 8.51 (0.335) 6.10 (0.240) 6.60 (0.260) FEATURES • High Voltage Switching • Low Power Amplifier Applications • Hermetic TO39 Package 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. 5.08 (0.200) typ. APPLICATIONS: 2 1 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 2.54 (0.100) • General Purpose • High Speed Saturated Switching 3 45° TO–39 (TO-205AD) METAL PACKAGE Underside View PIN 1 – Emitter PIN 2 – Base PIN 3 – Collector ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCEO VCBO VEBO IC PD PD TJ , TSTG Collector – Emitter Voltage Collector – Base Voltage Emmiter – Base Voltage Collector Current Total Device Dissipation @ TA = 25°C Derate above 25°C Total Device Dissipation @ TC = 25°C Derate above 25°C Operating and Storage Junction Temperature Range -140V -140V -5V -1A 1W 5.71mW/ °C 5W 28.6mW / °C –65 to +200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5943 Issue 2 2N3635 ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise stated) Parameter Test Conditions OFF CHARACTERISTICS BVCEO BVCBO BVEBO IEBO ICBO Collector–Emitter Breakdown Voltage1 IC = -10mA Collector – Base Breakdown Emitter – Base Breakdown Emitter Cut-off Current Collector Cut-off Current Voltage1 IC = -100μA IC = 0 VBE = -3.0V VCB = -100V IC = -0.1mA IC = -1.0mA hFE DC Current Gain1 IC = -10mA IC = -50mA IC = -150mA VCE(sat) VBE(sat) Collector – Emitter Saturation Voltage1 Base – Emitter Saturation Voltage1 IC = -10mA IC = -50mA IC = -10mA IC = -50mA VCE = -30V VCB = -20V VBE = 1.0V Voltage1 IB = 0 IE = 0 IE = -10μA IC = 0 IE = 0 VCE = -10V VCE = -10V VCE = -10V VCE = -10V VCE = -10V IB = -1.0mA IB = -5mA IB = -1.0mA IB = -5mA IC = -30mA f = 100MHz IE = 0 f = 100kHz IC = 0 f = 1.0MHz Min. -140 -140 -5.0 Typ. Max. Unit V -50 -100 nA ON CHARACTERISTICS 80 90 100 100 50 -0.3 -0.5 -0.8 -0.65 -0.9 V V 300 − SMALL SIGNAL CHARACTERISTICS ft Cob Cib hie hre hfe hoe NF Current Gain Bandwidth Product Output Capacitance Input Capacitance Input Impedance Voltage Feedback Ratio Small Signal Current Gain Output Admittance Noise Figure VCE = -10V RS = 1.0KΩ VCC = -100V IC = -50mA IC = -0.5mA f = 1.0kHz VBE = 4.0V IB1 = IB2 =-5mA VCE = -10V IC = -10mA f = 1.0kHz 80 100 10 75 200 1200 3.0 320 200 3.0 MHz pF pF Ω x10-4 — μmhos dB SWITCHING CHARACTERISTICS ton toff Turn–On Time Turn–Off Time 400 600 ns 1) Pulse test : Pulse Width < 300μs ,Duty Cycle < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 5943 Issue 2