2N5067

2N5067 MECHANICAL DATA Dimensions in mm(inches) 25.15 (0.99) 26.67 (1.05) 10.67 (0.42) 11.18 (0.44) 1.52 (0.06) 3.43 (0.135) 6.35 (0.25) 9.15 (0.36) NPN SILICON POWER TRANSISTOR 38.61 (1.52) 39.12 (1.54) 0.97 (0.060) 1.10 (0.043) 29.9 (1.177) 30.4 (1.197) 16.64 (0.655) 17.15 (0.675) 22.23 (0.875) max. FEATURES • LOW SATURATION VOLTAGES • HIGH RELIABILITY • HERMETIC PACKAGE 1 2 3 (case) 3.84 (0.151) 4.09 (0.161) 7.92 (0.312) 12.70 (0.50) APPLICATIONS TO–3(TO204AA) PIN 1 — Base . PIN 2 — Emitter Case is Collector • POWER SWITCHING CIRCUITS • POWER AMPLIFIER APPLICATIONS ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VCBO VCEO VEBO IC ICM IB Ptot Tstg, Tj Collector – Base Voltage (IE = 0) Collector – Emitter Voltage (IB = 0) Emitter – Base Voltage (IC = 0) Collector Current Continuous Collector Current Peak Base Current Total Power Dissipation at Tcase ≤ 25°C Derate above 25°C Storage Temperature Junction Temperature 40V 40V 5.0V 5A 10A 1.0A 87.5W 0.5 W/°C –65 to 200°C 200°C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 6605 Issue 1 2N5067 ELECTRICAL CHARACTERISTICS (Tcase = 25°C unless otherwise stated) Parameter VCEO(BR)* ICEO ICEX ICBO IEBO hFE* VCE(sat)* VBE(on)* hfe fT Collector - Emitter Breakdown Voltage Collector Cut-off Current Collector Cut-off Current Collector Cut-off Current Emitter Cut-off Current DC Current Gain Collector – Emitter Saturation Voltage Emitter Base on Voltage Small Signal Current Gain Current Gain Bandwidth product Test Conditions IC = 200mA VCE = 40V VCE = 40V VCB = 40V VBE = 5V IC = 1.0A IC = 5A IC = 1.0A IC = 5A IC = 1.0A IB = 0 VBE = 1.5V TCASE =150°C IE = 0 IC = 0 VCE = 2V VCE = 2V IB = 0.1A IB = 1.0A VCE = 2V Min. 40 Typ. Max. Unit V 1.0 0.1 2 0.1 1.0 mA mA mA mA — V V — MHz 20 7 80 0.4 1.5 1.2 IC = 0.5A VCE = 10V f = 1.0 kHz IC =1.0A VCE = 10V f = 1.0 MHz 20 4.0 THERMAL CHARACTERISTICS RθJC Thermal Resistance Junction to Case Max 2.0 °C/W * Pulse test tp = 300μs , δ = 2 % Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 6605 Issue 1