BDY28B

BDY28B MECHANICAL DATA Dimensions in mm (inches) 25.15 (0.99) 26.67 (1.05) 10.67 (0.42) 11.18 (0.44) 1.52 (0.06) 3.43 (0.135) 6.35 (0.25) 9.15 (0.36) HIGH CURRENT NPN SILICON TRANSISTOR FEATURES • • • • • HIGH SWITCHING CURRENTS HIGH RELIABILITY CECC SCREENING OPTIONS SPACE QUALITY LEVEL OPTIONS JAN LEVEL SCREENING OPTIONS 38.61 (1.52) 39.12 (1.54) 0.97 (0.060) 1.10 (0.043) 22.23 (0.875) max. 7.92 (0.312) 12.70 (0.50) 29.9 (1.177) 30.4 (1.197) 16.64 (0.655) 17.15 (0.675) 1 2 3 (case) 3.84 (0.151) 4.09 (0.161) APPLICATIONS • • SWITCHING REGULATORS LINEAR APPLICATIONS TO3 (TO204AA) Pin 1 = Base Pin 2 = Emitter Case = Collector ABSOLUTE MAXIMUM RATINGS TCASE = 25° unless otherwise stated C VCBO VCEO VEBO IC IB Ptot TJ Tstg Collector - Base Voltage Collector - Emitter Voltage Emitter – Base Voltage Continuous Collector Current Base Current Total Power Dissipation at Tcase = 25° C Derate above 25° C Junction Temperature Storage Temperature 500V 250V 10V 6A 3A 50W 0.29W/° C 200° C -65 to 200° C Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk DOC 7588, ISSUE 1 BDY28B THERMAL CHARACTERISTICS Rth j-case Thermal resistance to case Max 3.5 Unit ° C/W ELECTRICAL CHARACTERISTICS (Tcase=25°C unless otherwise stated) Parameter ICEO ICES IEBO V(BR)CEO* V(BR)CBO* VCE(sat)* VBE(sat)* hFE* Collector Cut-Off Current Collector Cut-Off Current Emitter Cut-Off Current Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Forward-current transfer ratio Test Conditions VCE = 250V VCE = 400V VEB = 10V IC = 50mA IC = 3mA IC = 2.0A IC = 2.0A IC = 1.0A IC = 2.0A IB = 0.25A IB = 0.25A VCE = 4.0V VCE = 4.0V IB = 0 VBE = 0 IC = 0 IB = 0 Min. Typ. Max. 1.0 1.0 1.0 220 500 0.6 1.2 65 30 45 90 Unit mA V DYNAMIC CHARACTERISTICS Cobo FT Ton Toff Output Capacitance IE = 0 f = 1.0MHz IC = 0.5A f = 10.0MHz IC= 5.0A IC= 5.0A IB1= 1.0A IB1=-IB2= 1.0A VCE = 15V 10 1.0 3.5 VCB = 10V 65 120 pF Transition Frequency Turn-on time Turn-off time MHz µs * Pulse test tp = 300µs, δ < 2% Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk DOC 7588, ISSUE 1