BUY49S_01

BUY49S MECHANICAL DATA Dimensions in mm (inches) 8.51 (0.34) 9.40 (0.37) 7.75 (0.305) 8.51 (0.335) SILICON NPN TRANSISTOR 6.10 (0.240) 6.60 (0.260) 12.70 (0.500) min. 0.89 max. (0.035) 0.41 (0.016) 0.53 (0.021) dia. APPLICATIONS • Switching Speed • Low Collector Emitter Saturation • General Purpose Switching 5.08 (0.200) typ. 2 1 0.74 (0.029) 1.14 (0.045) 0.71 (0.028) 0.86 (0.034) 2.54 (0.100) 3 Underside View TO–39 PACKAGE (TO-205AD) Pin 1 – Emitter Pin 2 – Base Pin 3 – Collector (Tcase = 25°C unless otherwise stated) ABSOLUTE MAXIMUM RATINGS VCBO VCEO VEBO IC ICM Ptot Collector – Base Voltage (IE = 0) Collector – Emitter Voltage(IB = 0) Emitter – Base Voltage (IC = 0) Collector Current Peak Collector Current Total Power Dissipation @Tamb ≤ 25°C @Tcase ≤ 50°C TSTG Storage Temperature Range TJ Maximum Operating Junction Temperature Rthj-case Thermal resistance Junction-case Rthj-amb Thermal Resistance Junction-case-ambient 250V 200V 6V 3A 5A 1W 1W –65 to +200°C 200°C 15°C/W 175°C/W Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3089 Issue 1 BUY49S ELECTRICAL CHARACTERISTICS Parameter ICBO V(BR)CBO VEBO* VCE(sat)* VBE(sat)* Collector Cut-off Current Collector – Base Breakdown Voltage Emitter – Base Sustaining Voltage Collector – Emitter Saturation Voltage Base – Emitter Saturation Voltage (Tcase = 25°C unless otherwise stated) Test Conditions VCB = 200V IE = 0 IC = 100µA IC = 20mA IE = 1mA IC = 0.5A IC = 0.5A IC = 20mA IC = 0.5A IC = 20mA IC = 100mA IE = 0 f = 1MHz IC = 0.5A IB1 = –IB2 = 50mA VCE = 50V VCC = 20V TC = 150°C IE = 0 IB = 0 IC = 0 IB = 50mA IB = 50mA VCE = 5V VCE = 5V VCE = 2V TC = –55°C VCE = 10V VCB = 10V Min. Typ. Max. Unit 0.1 50 µA 250 200 6 0.2 1.1 40 40 16 50 30 0.3 1 0.2 MHz pF µs A 80 — V VCEO(sus)* Collector – Emitter Sustaining Voltage hFE* DC Current Gain fT CCBO ton toff Is/b** Transition Frequency Collector – Base Capacitance Turn-On Time Turn-Off Time Second Breakdown Collector Current NOTES * Pulse Test: tp = 300µs, δ = 1.5% ** Pulse Test: 1sec, non-repetitive pulse. Semelab Plc reserves the right to change test conditions, parameter limits and package dimensions without notice. Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to verify that datasheets are current before placing orders. Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk Document Number 3089 Issue 1