LM117-220M

LM117-220M LM117SMD9 MECHANICAL DATA Dimensions in mm 1 0.6 0.8 4.6 16.5 3.6 Dia. 1 3 .5 1 0 .6 POSITIVE ADJUSTABLE VOLTAGE REGULATOR IN TO 220 METAL AND CERAMIC SURFACE MOUNT PACKAGES FEATURES • HERMETIC TO220 METAL OR CERAMIC SURFACE MOUNT PACKAGES 123 1 3 .7 0 • SCREENING OPTIONS AVAILABLE 1.0 2 .5 4 BSC 0 .8 9 (0 .0 3 5 ) m in . • ALL LEADS ISOLATED FROM CASE(METAL PACKAGE) • OUTPUT VOLTAGE RANGE OF 1.25 TO 37V (1.25 TO 57V FOR -HV VERSION) 2. 70 BSC 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) 3 .7 0 (0 .1 4 6 ) 3 .4 1 (0 .1 3 4 ) 3 .6 0 (0 .1 4 2 ) M ax. • OUTPUT CURRENT IN EXCESS OF 1.5A • 0.1% LINE AND LOAD REGULATION 4 .1 4 (0 .1 6 3 ) 3 .8 4 (0 .1 5 1 )  ! 0 .7 6 (0 .0 3 0 ) m in . 1 6 .0 2 (0 .6 3 1 ) 1 5 .7 3 (0 .6 1 9 ) 1 0 .6 9 (0 .4 2 1 ) 1 0 .3 9 (0 .4 0 9 ) • FLOATING OPERATION FOR HIGH VOLTAGES • COMPLETE SERIES OF PROTECTIONS: 9 .6 7 (0 .3 8 1 ) 9 .3 8 (0 .3 6 9 ) 1 1 .5 8 (0 .4 5 6 ) 1 1 .2 8 (0 .4 4 4 ) • CURRENT LIMITING 0 .5 0 (0 .0 2 0 ) 0 .2 6 (0 .0 1 0 ) • THERMAL SHUTDOWN • SOA CONTROL • 1% VOLTAGE TOLERANCE OPTION Pin 1 - Adjust Pin 2 - Output Pin 3 - Input TO220M SMD1 -TO220 Metal Package - Isolated - SMD1Ceramic Surface Mount Package ABSOLUTE MAXIMUM RATINGS (Tcase = 25°C unless otherwise stated) VI–O IO PD Tj Tstg Semelab plc. Input - Output Differential Voltage Output Current Power Dissipation Operating Junction Temperature Range Storage Temperature Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk – Standard – HV Series 40V 60V Internally limited Internally limited –55 to 150°C –65 to 150°C prelim. 5/00 LM117-220M LM117SMD9 ELECTRICAL CHARACTERISTICS (VI – VO = 5V, IO = 500mA, Parameter D unless otherwise stated) Test Conditions VI – VO = 3 to 40V VO £ 5V Tj = 25°C Tj = 25°C Tj = 25°C Min. Typ. 0.01 0.02 5 20 0.1 0.3 50 Max. 0.02 0.05 15 50 0.3 1 100 5 1.3 Unit. %/V mV % m VO Line Regulation D VO Load Regulation IO = 10mA to 1.5 A VO ³ 5V IO = 10mA to 1.5A IADJ D Adjust Pin Current Adjust Pin Current Change Reference Voltage (between pin 3 and pin 1) Output Voltage Temperature Stability VO – VO = 40V VI – VO £ 15V VI – VO = 40V Tj = 25°C, 10Hz to 10kHz Tj = 25°C f = 100Hz CADJ = 0 CADJ = 10mF 66 1.5 VI – VO = 2.5 to 40V IO = 10mA to 1.5A VI – VO = 3 to 40V IO = 10mA to 1.5A 1.2 A A IADJ 0.2 1.25 1 3.5 2.2 0.4 0.003 65 80 m VREF D V % VO VO IO(min) Minimum Load Current IO(max) Maximum Load Current eN SVR Output Noise (percentage of VO) Supply Voltage Rejection (*) 5 mA A % dB (*) CADJ is connected between pin 1 and ground. THERMAL DATA RTHj–case RTHj–amb Thermal Resistance Junction – Case Thermal Resistance Junction – Ambient Max. 3°C / W Max. 50°C / W Semelab plc. Telephone +44(0)1455 556565. Fax +44(0)1455 552612. E-mail: sales@semelab.co.uk Website: http://www.semelab.co.uk prelim. 5/00