SKKH213

VRSM VRRM (dv/ VDRM dt)cr V 900 V 800 V/µs 500 ITRMS (maximum values for continuous operation) 370 A 230 A SKKT 213/08 D 213/12 E 213/14 E 213/16 E 213/18 E 213/20 E 213/22 E 420 A 253 A SKKT 253/08 D 253/12 E 253/14 E 253/16 E 253/18 E – – 370 A 230 A SKKH – 213/12 E 213/14 E 213/16 E 213/18 E 213/20 E 213/22 E 420 A 250 A SKKH 253/08 D 253/12 E 253/14 E 253/16 E 253/18 E – – ITAV (sin. 180; Tcase = 85 °C) SEMIPACK® 3 Thyristor / Diode Modules SKKT 213 SKKT 253 SKKH 213 SKKH 253 1300 1200 1000 1500 1400 1000 1700 1600 1000 1900 1800 1000 2100 2000 1000 2300 2200 1000 Symbol Conditions ITAV ID IRMS ITSM i 2t tgd tgr (di/dt)cr tq IH IL VT VT(TO) rT IDD; IRD VGT IGT VGD IGD Rthjc sin. 180; (Tcase = ...) B2/B6 Tamb = 35 °C W1/W3 P 16/200 F Tvj = 25 °C; 10 ms Tvj = 130 °C; 10 ms Tvj = 25 °C; 8,3 ... 10 ms Tvj = 130 °C; 8,3 ... 10 ms Tvj = 25 °C; IG = 1 A diG/dt = 1 A/µs VD = 0,67 . VDRM Tvj = 130 °C Tvj = 130 °C Tvj = 25 °C; typ. / max. Tvj = 25 °C; RG = 33 Ω; typ. / max. Tvj = 25 °C; IT = 750 A Tvj = 130 °C Tvj = 130 °C Tvj = 130 °C; VRD = VRRM VDD = VDRM Tvj = 25 °C; d.c. Tvj = 25 °C; d.c. Tvj = 130 °C; d.c. Tvj = 130 °C; d.c. cont. sin. 180 rec. 120 per thyristor / per module SKKT 213 SKKT 253 SKKH 213 SKKT 253 213 (90°C) 354/456 425/3 x 360 8 500 7 500 361 000 281 000 1 2 250 typ. 50 ... 150 150 / 500 0,3 / 2 max. 1,9 0,95 1,3 50 3 200 0,25 10 0,11 / 0,055 0,115 / 0,057 0,125 / 0,0625 0,08 / 0,04 – 40 ... + 130 3600 / 3000 5 (44 lb. in.) + 15 %1) 9 (80 lb. in.) + 15 %2) 5 . 9,81 430 SKKT: A 43 max. 1,7 0,85 1,1 50 253 (85°C) 387/502 465/3 x 400 9 000 8 000 405 000 320 000 Units A A A A A A2s A2s µs µs A/µs µs mA A V V mΩ mA V mA V mA °C/W °C/W °C/W °C/W °C V~ Nm Nm m/s2 g SKKT SKKT SKKH Features • Heat transfer through aluminium oxide ceramic isolated metal baseplate • Chip soldered on direct copper bonded Al2O3 ceramic • Thyristor with amplifying gate • UL recognized, file no. E 63 532 Typical Applications • DC motor control (e.g. for machine tools) • Temperature control (e.g. for ovens, chemical processes) • Professional light dimming (studios, theaters) Rthch Tvj, Tstg Visol M1 M2 a w Case 1) 2) a. c. 50 Hz; r.m.s; 1 s/1 min to heatsink SI (US) units to terminals approx. → page B 1 – 86 SKKH: A 56 See the assembly instructions The screws must be lubricated © by SEMIKRON 0898 B 1 – 81 B 1 – 82 © by SEMIKRON © by SEMIKRON 0896 B 1 – 83 B 1 – 84 © by SEMIKRON © by SEMIKRON B 1 – 85 B 1 – 86 © by SEMIKRON Ergänzung zu den Montagehinweisen im SEMIKRON Datenbuch Bitte beachten Sie, daß beim Befestigen der Stromzuführung an Anschluß (1) – zur Vermeidung von Schäden am Gehäuse – die Mutter mit einem Maulschlüssel (A), gegengehalten werden muß. 9 Nm ± 15% 80 lb.in. ± 15% (1) (A) Supplement to the Assembly Instructions in the SEMIKRON Data Book Please note that when connecting the power supply conductor to terminal (1), a wrench (spanner) (A) should be used to restrain the nut on terminal (1) to avoid damage to the housing.