S424CA

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 5189, REV. - S424CA THREE PHASE FULL WAVE RECTIFIER ASSEMBLY DESCRIPTION: 150 VOLT, 44 AMP, 40 NS 3-PHASE FULL WAVE RECTIFIER ASSEMBLY. MAX RATINGS/ELECTRICAL CHARACTRISTICS ALL RATINGS ARE AT TC = 25 C UNLESS OTHERWISE SPECIFIED RATING PEAK INVERSE VOLTAGE (PER LEG) MAXIMUM FORWARD VOLTAGE DROP (PER LEG) (If = 10 AMPS) MAXIMUM DC OUTPUT CURRENT (TC = 55 OC) (TC = 100 C) PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec. (PER LEG) MAXIMUM REVERSE RECOVERY TIME (If = 0.5A, Ir = 1.0A, trr = 0.25A) (TC = 25 OC) TC = 100 C) MAXIMUM THERMAL RESISTANCE (PER LEG) MAXIMUM OPERATING AND STORAGE TEMPERATURE RANGE RθJC TJ, stg O O SYMBOL PIV Vf IO MAX. 150 1 44 23 UNITS Volts Volts Amps Amps Amps ns μA μA °C/W °C IFSM trr Ir 300 40 20 200 0.85 -55 to + 150 MAXIMUM REVERSE CURRENT Ir @ PIV (PER LEG) ©2010 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • www.sensitron.com • sales@sensitron.com S424CA SENSITRON DATA SHEET 5189, REV. – MECHANICAL DIMENSIONS: In Inches / mm .82 Max. (20.83) .59 (12.95 .39 9.91) .15 (3.81 .09 2.29) .320 Max (8.13) .125 (3.18 .100 2.54) .030 (.76 .015 .38) .395 (10.03 .355 9.02) –+ 1.90 (48.26 1.84 46.74) 2.28 (57.91 2.22 56.39) .151 (3.84 .141 3.58) .395 (10.03 .355 9.02) .395 (10.03 .355 9.02) + .770 (19.56 .730 18.54) AC AC AC AC 1.53 (38.86 1.47 37.34) AC AC .395 (10.03 .355 9.02) .395 .355 .270 .230 (10.03 9.02) (6.86) 5.84) – .118 (3.00 .108 2.74) .208 (5.28 .168 4.27) .189 (4.80 Dia (2 Places) .149 3.78) *Case--black anodized. Potting surface—uncontrolled Fig. 424 DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed writ ten permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations ©2010 Sensitron Semiconductor • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • www.sensitron.com • sales@sensitron.com