S424IE

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4315, REV. A.1 S424IE THREE PHASE FULL WAVE RECTIFIER ASSEMBLY DESCRIPTION: A 1000 VOLT, 40 AMP, 300 NS 3-PHASE FULL WAVE RECTIFIER ASSEMBLY. MAXIMUM RATINGS RATING PEAK INVERSE VOLTAGE (PER LEG) MAXIMUM DC OUTPUT CURRENT (TC = 55 OC) (TC = 100 C) PEAK SINGLE CYCLE SURGE CURRENT tp = 8.3 msec. (PER LEG) MAXIMUM THERMAL RESISTANCE MAXIMUM JUNCTION TEMPERATURE RANGE OPERATING AND STORAGE TEMPERATURE RANGE IFSM RθJC TJ Tc, Tstg O ALL RATINGS ARE AT TC = 25 C UNLESS OTHERWISE SPECIFIED SYMBOL PIV IO MAX. 1000 40 24 300 0.85 175 -55 to + 150 UNITS Volts Amps Amps Amps °C/W °C °C ELECTRICAL CHARACTRISTICS CHARACTRISTIC MAXIMUM FORWARD VOLTAGE DROP (PER LEG) (If = 10 AMPS) MAXIMUM REVERSE CURRENT Ir @ PIV (PER LEG) (TC = 25 OC) TC = 100 OC) MAXIMUM REVERSE RECOVERY TIME (If = 0.5A, Ir = 1.0A, trr = 0.25A) trr SYMBOL Vf Ir MAX. 1.5 20 200 300 UNITS Volts µA µA ns • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 4315, REV. A.1 S424IE MECHANICAL DIMENSIONS: In Inches / mm .82 Max. (20.83) .59 (12.95 .39 9.91) .15 (3.81 .09 2.29) .320 Max (8.13) .125 (3.18 .100 2.54) .030 (.76 .015 .38) .395 (10.03 .355 9.02) .395 (10.03 .355 9.02) .770(19.56 .73018.54) .395 (10.03 .355 9.02) + AC AC AC –+ Fig. 424 1.90 (48.26 1.84 46.74) 2.28 (57.91 2.22 56.39) .151 (3.84 .141 3.58) AC 1.53 (38.86 1.47 37.34) AC AC .395 (10.03 .355 9.02) .395 (10.03 .355 9.02) .270 (6.86) .230 5.84) – .118 (3.00 .108 2.74) .208 (5.28 .168 4.27) .189 (4.80 Dia (2 Places) .149 3.78) *Case--black anodized. Potting surface--uncontrolled DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •