SHD217302A

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 317, REV - SHD217302A HERMETIC POWER MOSFET N-CHANNEL FEATURES: œ 100 Volt, 0.16 Ohm, 14A MOSFET œ Fast Switching œ Low RDS (on) œ Equivalent to IRF130 Series MAXIMUM RATINGS RATING GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT @ TC = 100•C OPERATING AND STORAGE TEMPERATURE TOTAL DEVICE DISSIPATION @ TC = 25•C THERMAL RESISTANCE, JUNCTION TO CASE ALL RATINGS ARE AT TC = 25•C UNLESS OTHERWISE SPECIFIED. SYMBOL VGS ID TOP/TSTG PD RthJC BVDSS VDS(ON) RDS(ON) VGS(th) gfs IDSS IGSS td(ON) tr td(OFF) tf VSD trr Ciss Coss Crss MIN. -55 100 2.0 4.6 0.14 2.8 7.0 9.5 42 22 25 1.0 650 240 44 TYP. MAX. –20 14 +150 96 1.3 100 0.16 4.0 250 1000 100 -100 14 63 33 38 2.5 250 UNITS Volts Amps •C Watts •C/W Volts Volts W Volts S(1/W) mA nA nsec Volts nsec pF ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 1.0mA DRAIN TO SOURCE ON-STATE VOLTAGE VGS = 10V, ID = 10A STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 20A GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250mA FORWARD TRANSCONDUCTANCE VDS ˜ ID (ON) X, RDS (ON) Max., IDS = 0.6 X ID ZERO GATE VOLTAGE DRAIN CURRENT VDS = Max. Rating, VGS = 0V VDS = 0.8xMax. Rating, VGS = 0V, TJ = 125•C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDD = 50V, RISE TIME ID = 7.0A, TURN OFF DELAY TIME RG = 12W, FALL TIME VGS = 10V DIODE FORWARD VOLTAGE TC = 25•C, IS = 14A, VGS = 0V REVERSE RECOVERY TIME TJ = 25•C, If = 14A, diF/ds = 100A/msec, INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = 25 V REVERSE TRANSFER CAPACITANCE f = 1.0MHz -   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - http://www.sensitron.com E-mail Address - sales@sensitron.com               SHD217302A SENSITRON DATA SHEET 317 REVISION - MECHANICAL DIMENSIONS: in Inches / m .440±.020 (11.2±.508) .290±.010 (7.37±.254) .065±.010 (1.65±.254) 2 .020±.010 (.508±.254) .350±.010 (8.89±.254) .185±.010 (4.70±.254) 3 .110 (2.79) Max Alumina Ring Moly Base Terminal 1 Moly Lid .020±.005 R (.508±.127 ) .020±.002 (.508±.051) .060±.010 (1.52±.254) SHD-4A PINOUT TABLE DEVICE TYPE N-CHANNEL MOSFET SHD-4A PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE   221 WEST INDUSTRY COURT DEER PARK, NY 11729-4681 PHONE (631) 586-7600 FAX (631) 242-9798 World Wide Web Site - http://www.sensitron.com E-mail Address - sales@sensitron.com               SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •