SHD218501A

SENSITRON SEMICONDUCTOR TECHNICAL DATA DATA SHEET 303, REV. B Formerly Part Number SHD2181/A/B SHD218501 SHD218501A SHD218501B HERMETIC POWER MOSFET N-CHANNEL FEATURES: • 60 Volt, 0.027 Ohm, 45A MOSFET • Isolated Hermetic Metal Package • Fast Switching • Low RDS (on) • Equivalent to IRFM054 Series MAXIMUM RATINGS ALL RATINGS ARE AT TC = 25°C UNLESS OTHERWISE SPECIFIED. SYMBOL VGS ID IDM TOP/TSTG PD MIN. -55 TYP. MAX. ±20 45 35 220 +150 200 UNITS Volts Amps Amps °C Watts RATING GATE TO SOURCE VOLTAGE ON-STATE DRAIN CURRENT @ TC = 25°C VGS = 10V @ TC = 100°C PULSED DRAIN CURRENT @ TC = 25°C OPERATING AND STORAGE TEMPERATURE TOTAL DEVICE DISSIPATION @ TC = 25°C ELECTRICAL CHARACTERISTICS DRAIN TO SOURCE BREAKDOWN VOLTAGE VGS = 0V, ID = 1.0mA STATIC DRAIN TO SOURCE ON STATE RESISTANCE VGS = 10V, ID = 35A GATE THRESHOLD VOLTAGE VDS = VGS, ID = 250µA FORWARD TRANSCONDUCTANCE VDS ≥ 15V, IDS = 35A ZERO GATE VOLTAGE DRAIN CURRENT VDS = 0.8xMax. Rating, VGS = 0V VDS = 0.8xMax. Rating, VGS = 0V, TJ = 125°C GATE TO SOURCE LEAKAGE FORWARD VGS = 20V GATE TO SOURCE LEAKAGE REVERSE VGS = -20V TURN ON DELAY TIME VDD = 30V, RISE TIME ID = 35A, TURN OFF DELAY TIME RG = 2.35Ω FALL TIME DIODE FORWARD VOLTAGE TC = 25°C, IS = 35A, VGS = 0V REVERSE RECOVERY TIME TJ = 25°C, IF = 35A, di/ds ≤ 100A/µsec, VDD ≤ 50V INPUT CAPACITANCE VGS = 0 V OUTPUT CAPACITANCE VDS = 25 V REVERSE TRANSFER CAPACITANCE f = 1.0MHz THERMAL RESISTANCE, JUNCTION TO CASE BVDSS 60 RDS(ON) VGS(th) gfs 2.0 20 IDSS IGSS td(ON) tr td(OFF) tf VSD trr 25 250 100 -100 33 180 100 100 2.5 280 nsec Ciss Coss Crss RthJC 4600 2000 340 pF 0.6 °C/W µA nA 0.027 4.0 Ω Volts S(1/ Ω ) Volts nsec - - Volts - • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (516) 586-7600 • FAX (516) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SHD218501 SHD218501A SHD218501B SENSITRON TECHNICAL DATA DATA SHEET 303, REV. B MECHANICAL DIMENSIONS: in Inches / mm .370±.010 (9.40±.254) .370±.010 (9.40±.254) .510±.020 (12.9±.508) .520±.020 (13.2±.508) .370±.010 (9.40±.254) .090±.010 (2.29±.254) 2 .610±.010 (15.5 ±.254) 3 .030±.010 (.762±.254) .125±.010 (3.17±.254) 2 .030±.010 (.762±.254) .610±.010 (15.5±.254) .320±.010 (8.13±.254) 2 .030±.010 (.762±.254) .610±.010 (15.5±.254) .320±.010 (8.13 ±.254) 3 .110 (2.80) Max 3 Alumina Ring Terminal 1 .110 (2.79) Max Alumina Ring Moly Base Terminal 1 Moly Lid .020±.005 R (.508±.127 ) SHD-5 Copper Terminals .130 (3.30) Max .020±.002 (.508±.051) Moly Lid .020±.005 R (.508±.127 ) Alumina Ring Moly Base Terminal 1 .060±.010 (1.52±.254) .015±.002 (.381±.051) .060±.010 (1.52±.254) SHD-5A SHD-5B PINOUT TABLE DEVICE TYPE MOSFET, SURFACE MOUNT SHD-5, 5A, 5B PACKAGE PIN 1 DRAIN PIN 2 SOURCE PIN 3 GATE • 221 WEST INDUSTRY COURT • DEER PARK, NY 11729-4681 • PHONE (516) 586-7600 • FAX (516) 242-9798 • • World Wide Web Site - http://www.sensitron.com • E-mail Address - sales@sensitron.com • SENSITRON SEMICONDUCTOR TECHNICAL DATA DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment, and safety equipment), safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement. 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • 221 West Industry Court Deer Park, NY 11729-4681 (631) 586-7600 FAX (631) 242-9798 • • World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com •