SPDM16C11

SENSITRON SEMICONDUCTOR Part Number: SPDM16C11, Rev 122908 SPDM16C11 DIAMONDBACK Series DIAMONDBACK Series Programmable Multi-Channel Solid State Power Controllers The Diamondback Programmable MultiChannel Solid State Power Controller (SSPC) is a microcontroller-based, COTS Solid State Power Controller board designed for 28VDC applications. Each channel of the Diamondback has software-programmable current ratings and can operate grouped with other channels to support loads up to 150A. The board has integrated current, temperature and voltage sensing and no derating over temperature. Parameter measurements, system status information and control commands are issued over a serial communications interface. Features: • • • • • • • • • 16 electrically-protected channels Programmable ratings from 0.25A to 25A Parallel channel capability up to 150A Total current capability of up to 160A Max power dissipation less than 20W True I2t and thermal memory protection Normal and SensWide™ instant trip Trip-free reset circuit Current, temperature, voltage readings • • • • • • • • • Hi accuracy over temperature range Controlled turn-on/off to reduce EMC Trip disable and maintenance modes Power-up and continuous built-in-test Optically isolated input and outputs Isolated electrical control circuit 5VDC auxiliary power option Conduction cooled board -55oC to 85oC operating temperature Benefits: Sensitron’s SSPC technology and products combine the functionalities of electro-mechanical breakers, solid state relays, and system monitors, thereby providing the following benefits to our customers: • • • • • Electrical load protection and monitoring - current, voltage and temperature measurements Operational improvements by allowing for diagnostics, prognostics and condition-based maintenance Life cycle cost savings and reduced cost of ownership Increased radius of operation through power budgeting and load shedding Crew offloading and network-controlled intelligent load management Application Areas: Sensitron’s SSPC products are ideal for use in Power Management applications in the following markets: • • • • Military Ground Vehicles Unmanned Aerial Vehicles Marine Vessels Test & Industrial Equipment • • • • Communication and Command Centers Energy Exploration Equipment Off Highway and Heavy Duty Vehicles Medical Emergency Vehicles • Phone (631) 586 7600 • www.sensitron.com • E-Mail: sales@sensitron.com • Page 1 SENSITRON SEMICONDUCTOR CURRENT PROTECTION DIAMONDBACK Series Product Brief v1.1.6 Similarly to the traditional electromechanical circuit breakers, the DIAMONDBACK protects electrical circuits by closely controlling the I2t factor. CHANNEL PARALLELING Multiple individual channels can be paralleled in order handle large current loads. The new current rating is calculated as the sum of the individual channel ratings. To use channels in parallel, simply tie the channels’ load pins together, put the board in maintenance mode, and program the required parallel combination. HEALTH MONITORING DIAMONDBACK Solid State Power Controller provides current, voltage and temperature measurements. This information can be used to monitor electrical loads and perform tasks such as diagnostics, prognostics and condition-based maintenance. BLOCK DIAGRAM DIAMONDBACK’s architecture is comprised of high side switches controlled by a central microprocessor. The switching blocks are responsible for the control of individual channels. The processor performs all necessary measurements, data processing, and communicates to the user’s application through a CAN communications interface. Figure 1 – Block Diagram CAN COMMUNICATIONS All communications between the Diamondback and the controller is conducted via a J1939 compliant CAN communications interface. Diamondback only responds to the user’s commands, however, user’s software is not required to operate the Diamondback Series products. Communications interface commands are defined by Sensitron’s Interface Communications Document (ICD). Please contact us for a copy of this document. • Phone (631) 586 7600 • www.sensitron.com • E-mail: sales@sensitron.com • Page 2 SENSITRON SEMICONDUCTOR I/O DEFINITIONS DIAMONDBACK Series Product Brief v1.1.6 Control & Status (TTL/CMOS Compatible) BIAS (VCC) BIAS (VCC) Current BIT* Output MAINTENANCE MODE and TRIP DISABLE Inputs VT+ (Positive-going input threshold voltage) VT− (Negative-going input threshold voltage) ΔVT Hysteresis (VT+ VT−) CAN1 Driver Output Voltage – CANH (Dominant) Driver Output Voltage – CANL (Dominant) Driver Output Voltage – CANH (Recessive) Driver Output Voltage – CANL (Recessive) Driver Differential Output Voltage (Dominant) Driver Differential Output Voltage (Recessive) Driver Differential Output Voltage Rise/Fall Time Receiver Positive-going input threshold Receiver Negative-going input threshold Receiver Input Hysteresis Receiver Input Resistance ESD – Human body model 5.0V DC Nominal, 7.0V DC Absolute Maximum 4.5V to 5.5 VDC 210mA typ (TBD) Voh=3.7V, min, at Ioh=-20mA Vol=0.4V, max, at Iol=20mA 2.0V, min, 3.5V, max 1.2V, min, 2.3V, max 0.6V, min, 1.4V, max 2.75V, min; 3.5V, typ; 4.5V, max 0.5V, min; 2V, max 1.5V, min; 2.5V, typ; 3V, max 1.5V, min; 2.5V, typ; 3V, max 1.2V,min; 2V, typ; 3.1V, max -120mV, min; 12mV, Max 100nS to 250nS depending on Baud Rate 750mV, typ; 900mV, max 500mV, min; 650mV, typ 100mV, typ 40kΩ, min; 100kΩ, max +14kV, typ 0 to 70V DC, 90V DC Abs Maximum +600V or –600V Spike (< 10 µS) 1.2V typ @ VLINE = 28VDC 3.3V max @ VLINE = 28VDC 4.3V max @ VLINE = 45VDC 145% of the programmed current rating 115% of the programmed current rating Input/Line Voltage Input Voltage – Continuous – Transient Max Output Voltage of OFF Channel Max current without tripping Min current for guaranteed tripping Table 1 - Electrical Characteristics APPLICATION SUPPORT Sensitron’s Graphical User Interface provides a quick way to interact with the Diamondback board. This PCbased program is designed for lab use and enables the user to evaluate the board. The GUI sends the commands to the board to perform tasks such as channel turn on/off, measurement readings, channel paralleling, etc. Please contact the factory to obtain a copy of this program. COMPLIANT DOCUMENTS & STANDARDS MIL-STD-1275D MIL-STD-704F MIL-STD-217F, Notice 2 Characteristics of 28 Volt DC Electrical Systems in Military Vehicles Aircraft Electrical Power Characteristics Reliability Prediction of Electronic Equipment • Phone (631) 586 7600 • www.sensitron.com • E-mail: sales@sensitron.com • Page 3 SENSITRON SEMICONDUCTOR OUTLINE DRAWING DIAMONDBACK Series Product Brief v1.1.6 PART NUMBER ORDERING INFORMATION: Reference part number SPM16C11 for ordering. DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. • Phone (631) 586 7600 • www.sensitron.com • E-mail: sales@sensitron.com • Page 4