SRS Valve
Manifold mountable plastic switching solenoid valve
FEATURES · 3-way, 2 position valve (NO, NC & Distributor) · Design incorporates thermoplastics and non-corrosive metals · Offers high-density manifold mounting with convenient manifold to PC board interface · Weighs only 7 g, perfect where low weight is critical to overall system
MEDIA COMPATIBILITY
Gases and select liquids
PHYSICAL PROPERTIES
Operating environment Storage temperature 0 to 70 °C -40 to 70 °C 38 mm (1.5 in) 10 mm (0.394 in) 15.5 mm (0.61 in) Manifold mount, (gasket and screws supplied) 7 g (0.23 oz) 0.0267 cm3 40 µm None required
WETTED MATERIALS
Length Body: PBT; LNP Thermocomp® Elastomers: FKM Non-corrosive metals: 302 series stainless steel; 430 FR series stainless steel; CMI-B core iron; electroless nickel plating Width Height Porting
Weight Internal volume
ELECTRICAL
Power Voltage 0.5, 1.0 or 2.0 W 5, 12, 24 VDC ± 10%
Filtration (recommended) Lubrication
Thermocomp® is a registered trademark of General Electric Company.
October 2006 / 261
1/5
www.sensortechnics.com
SRS Valve
Manifold mountable plastic switching solenoid valve
PERFORMANCE CHARACTERISTICS
Part no.
SRS10... SRS11... SRS13... SRS14... SRS16... SRS17...
Pressure
0...35 psig 0...85 psig 0...20 psig 0...50 psig 0...10 psig 0...20 psig
Vacuum
Orifice siz es/ Equivalent CV1
0.020" (0.510 mm)/ 0.0075 CV
Leak rate2
R esp o n se
0...27 "Hg (0...13 psi)
0.030" (0.762 mm)/ 0.017 CV 0.045" (1.143 mm)/ 0.027 CV
≤0.016 sccm (bubble tight)
很抱歉,暂时无法提供与“SRS163PV24L”相匹配的价格&库存,您可以联系我们找货
免费人工找货