T6SHSHD121EEA

T2-06 High flow, compact diaphragm pumps FEATURES · Compact size, long life and efficiency · Single or twin head versions · Ideal for use in portable air and gas applications · Up to 6 or 12 lpm free flow, pressure up to 1.3 bar and vacuum up to 576 mbar · Light Duty (LD) and Heavy Duty (HD) DC brush iron core motor options WETTED MATERIALS Diaphragm: EPDM Valve: EPDM Head: PPA ELECTRICAL Voltage Nominal Max. T6...LD... T6...HD... Max. power @ nom. voltage T6SH...LD... T6TH...LD... T6SH...HD... T6TH...HD... Electrical termination 12 or 24 VDC 17 or 32 VDC 19 or 38 VDC 5.2 W 8.4 W 4W 7W solder tabs or 10 inch wire leads SPECIFICATIONS Max. ambient and media temperature Weight T6SH...LD... T6SH...HD... T6TH...LD... T6TH...HD... 0 to +50 °C 163 g 195 g 186 g 218 g August 2007 / 258 1/4 www.sensortechnics.com T2-06 High flow, compact diaphragm pumps PERFORMANCE CHARACTERISTICS (Standard conditions: 22 °C (70 °F) and 14.7 psia) Part no. T6SH...LD... T6TH...LD... T6SH...HD... T6TH...HD... Max. flow 6 lpm 12 lpm 6 lpm 12 lpm Max. pressure intermittent continuous 140 mbar (2 psi) 1.3 bar (19 psi) Max. vacuum 1.3 bar (19 psi) 576 mbar (17 inch Hg) FLOW CURVES Single head (T6SH...) Twin head (T6TH...) Note: slpm denotes Standard Liters per Minute. It is a unit for the flow rate at standard conditions of temperature and pressure. August 2007 / 258 2/4 www.sensortechnics.com T2-06 High flow, compact diaphragm pumps OUTLINE DRAWING T2-06 Single head 3/16 inch hose barb discharge 3/16 inch hose barb suction Ø 1.22 (31.0) for HD motor Ø 1.19 (30.2) for LD motor 1.18 (30.0) 0.47 (11.9) 10 inch wires on HD motor (solder tabs on LD motor) 3.19 (81.0) for HD motor 3.11 (79.0) for LD motor 1.71 (43.4) 1.98 (50.3) 1.66 (42.2) 0.54 (13.7) 0.94 (23.9) 4 x #4-40 UNC 0.15 (3.8) mounting holes third angle projection dimensions in inches (mm) August 2007 / 258 3/4 www.sensortechnics.com T2-06 High flow, compact diaphragm pumps OUTLINE DRAWING (cont.) T2-06 Twin head 3/16 inch hose barb discharge 3/16 inch hose barb suction Ø 1.22 (31.0) for HD motor Ø 1.19 (30.2) for LD motor 1.18 (30.0) 0.47 (11.9) 10 inch wires on HD motor (solder tabs on LD motor) 3.50 (88.9) for HD motor 3.45 (87.6) for LD motor 0.98 (24.9) 2.60 (66.0) 2.06 (52.3) 0.63 (16.0) 4 x #4-40 UNC 0.15 (3.8) mounting holes 0.86 (21.8) third angle projection dimensions in inches (mm) ORDERING INFORMATION Series Options T6 H ead configurations Mounting options S Standard (barbs on head) Motors* LD Light duty brush HD Heavy duty brush * Consult Sensortechnics for premium brush and BLCD motor options * Continuous duty at maximum rated voltage may reduce motor life Nominal/max.* voltages 12 12 / 19 V D C 24 24 / 38 V D C Free flow * 1 6 lpm (single head) 12 lpm (twin head) Valve E EPD M Diaphragm Body/head E EPD M A PPA T2-06 SH Single head TH Twin head * at max. rated voltage Example: T6 SH S HD 12 1 E E A Note: Custom specific modifications are widely available. Please contact your nearest Sensortechnics sales office for further information. Sensortechnics reserves the right to make changes to any products herein. Sensortechnics does not assume any liability arising out of the application or use of any product or circuit described herein, neither does it convey any license under its patent rights nor the rights of others. August 2007 / 258 4/4 www.sensortechnics.com