AN3200

Z-Power LED X10490 Technical Data Sheet 1 AX32X1 Acriche series is designed for AC source operation and high flux output applications. Acriche is a semi-permanent and environmental friendly semiconductor lighting that can be used in AC without additional device. Acriche's thermal management perform exceeds other power LED solutions. It incorporates state of the art SMD design and Thermal emission material. Acriche is ideal light sources for general illumination Applications. AX32X1 Features 사진 • Connect directly in AC power • Power Saving • Long Life Time • Simple BOM • Miniaturization • Low thermal resistance • SMT solderbility • Lead Free product • RoHS compliant Applications • Architectural lighting • Task lighting • Decorative / Pathway lighting • Household appliances * The appearance and specifications of the product can be changed for improvement without notice. Rev. 03 May 2008 www.ZLED.com Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 2 Part number of AX32X1 1. Part Number form : A X1 X2 X3 X4 X5 X1 W N Color Pure White Warm White X2 1 2 3 Acriche Series A3 X3 2 LENS Type Dome Type X4 0 1 2 3 Operating Voltage [V] 100 110 220 230 X5 0 1 PCB Type 4W PCB 2. Part Number of AX32X0 Part number AW3200 / AN3200 AW3220 / AN3220 Operating voltage 100V/110V [RMS] 220V/230V [RMS] Operating current 40mA [RMS] 20mA [RMS] Rev. 03 May 2008 www.ZLED.com Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 3 Outline dimensions 1. AX3201/AX3211 2. AX3221/AX3231 Notes : [1] [2] [3] [4] [5] All dimensions are in millimeters. (tolerance : ±0.2 ) Scale : none This drawing without tolerances are for reference only Slug of package isn’t connected to anode or cathode NC pin isn’t connected to electrode Rev. 03 May 2008 www.ZLED.com Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 4 Characteristics of Acriche 1. AW3201/AW3211 1-1 Electro-Optical characteristics at 100V/110V Ta=25ºC Parameter Luminous Flux Illuminance [1] Symbol ФV [2] Фl [4 ] Value Min Typ 195 220 6300 70 40 4 50 / 60 110 Max - Unit lm lx K mA [RMS] W Hz deg. [3] Correlated Color Temperature CRI Operating Current Power Dissipation Operating Frequency View Angle CCT Ra Iopt PD Freq 2Θ 1/2 1-2 Absolute Maximum Ratings Parameter Operating Voltage Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity Symbol vopt [5] PD Tj Topr Tstg Value 115/127 7.5 125 -30 ~ +85 -40 ~ +120 ±2,000V HBM Unit V [RMS] W ºC ºC ºC - *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of lead frame should be below 70 ℃. Rev. 03 May 2008 www.ZLED.com Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 5 Characteristics of Acriche 2. AN3201/AN3211 (CRI 70) 2-1 Electro-Optical characteristics at 100V/110V Ta=25ºC Parameter Luminous Flux Illuminance [1] Symbol ФV [2] Фl [4 ] Value Min Typ 150 170 3000 70 40 4 50 / 60 110 Max - Unit lm lx K mA [RMS] W Hz deg. [3] Correlated Color Temperature CRI Operating Current Power Dissipation Operating Frequency View Angle CCT Ra Iopt PD Freq 2Θ 1/2 2-2 Absolute Maximum Ratings Parameter Operating Voltage Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity Symbol vopt [5] Value 115/127 7.5 125 -30 ~ +85 -40 ~ +120 ±2,000V HBM Unit V [RMS] W ºC ºC ºC - PD Tj Topr Tstg - *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of lead frame should be below 70 ℃. Rev. 03 May 2008 www.ZLED.com Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 6 Characteristics of Acriche 3. AW3221/AW3231 3-1 Electro-Optical characteristics at 220V/230V Ta=25ºC Parameter Luminous Flux Illuminance [1] Symbol ФV [2] Фl [4 ] Value Min Typ 195 220 6300 70 20 4 50 / 60 110 Max - Unit lm lx K mA [RMS] W Hz deg. [3] Correlated Color Temperature CRI Operating Current Power Dissipation Operating Frequency View Angle CCT Ra Iopt PD Freq 2Θ 1/2 3-2 Absolute Maximum Ratings Parameter Operating Voltage Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity Symbol vopt [5] Value 253/265 7.5 125 -30 ~ +85 -40 ~ +120 ±2,000V HBM Unit V [RMS] W ºC ºC ºC - PD Tj Topr Tstg - *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of lead frame should be below 70 ℃. Rev. 03 May 2008 www.ZLED.com Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 7 Characteristics of Acriche 4. AN3221/AN3231 (CRI 70) 4-1 Electro-Optical characteristics at 220V/230V Ta=25ºC Parameter Luminous Flux Illuminance [1] Symbol ФV [2] Фl [4 ] Value Min Typ 150 170 3000 70 20 4 50 / 60 110 Max - Unit lm lx K mA [RMS] W Hz deg. [3] Correlated Color Temperature CRI Operating Current Power Dissipation Operating Frequency View Angle CCT Ra Iopt PD Freq 2Θ 1/2 4-2 Absolute Maximum Ratings Parameter Operating Voltage Power Dissipation Junction Temperature Operating Temperature Storage Temperature ESD Sensitivity Symbol vopt [5] Value 253/265 7.5 125 -30 ~ +85 -40 ~ +120 ±2,000V HBM Unit V [RMS] W ºC ºC ºC - PD Tj Topr Tstg - *Notes : [1] Acriche series maintains a tolerance of ±10% on flux and power measurements. [2] ФV is the total luminous flux output as measured with an integrated sphere. [3] Illuminance is measured at 50cm distance [4] Correlated Color Temperature is derived from the CIE 1931 Chromaticity diagram. CCT ±5% tester tolerance [5] ‘Operating Voltage' doesn't indicate the maximum voltage which customers use, but it means tolerable voltage according to the voltage variation rate by one's country. It is recommended that the temperature of lead frame should be below 70 ℃. Rev. 03 May 2008 www.ZLED.com Relative Spectral Power [a.u.] Relative Spectral Power [a.u.] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 8 Color spectrum 1. Pure white 1 .2 1 .0 0 .8 0 .6 0 .4 0 .2 0 .0 300 P u r e W h it e P h o t o p i c s e n s it iv it y c u r v e 400 500 600 700 800 W a v e le n g th [ n m ] 2. Warm white 1 .2 W a r m w h ite (C R I 7 0 ) 1 .0 0 .8 0 .6 0 .4 0 .2 0 .0 300 400 500 600 700 800 W a v e le n g th [ n m ] Rev. 03 May 2008 www.ZLED.com Current [RMS , mA] Current [RMS , mA] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 9 Current – Voltage characteristics 1. AX3201 80 100V 60 40 20 0 0 25 50 75 100 125 V o lt a g e [ R M S , V ] 2. AX3211 80 110V 60 40 20 0 0 25 50 75 100 125 V o lta g e [ R M S , V ] Rev. 03 May 2008 www.ZLED.com Current [RMS , mA] Current [RMS , mA] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 10 Current – Voltage characteristics 3. AX3221 40 220V 30 20 10 0 0 50 100 150 200 250 V o lt a g e [ R M S , V ] 4. AX3231 40 230V 30 20 10 0 0 50 100 150 200 250 V o lt a g e [ R M S , V ] Rev. 03 May 2008 www.ZLED.com Relative Luminous Flux [a.u.] Relative Luminous Flux [a.u.] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 11 Voltage – Relative flux characteristics 1. AX3201 2 .0 100V 1 .5 1 .0 0 .5 0 .0 80 85 90 95 100 105 110 115 120 V o lt a g e [ R M S , V ] 2. AX3211 2 .0 110V 1 .5 1 .0 0 .5 0 .0 90 95 100 105 110 115 120 125 130 V o lt a g e [ R M S , V ] Rev. 03 May 2008 www.ZLED.com Relative Luminous Flux [a.u.] Relative Luminous Flux [a.u.] Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 12 Voltage – Relative flux characteristics 3. AX3221 2 .0 220V 1 .5 1 .0 0 .5 0 .0 180 190 200 210 220 230 240 250 260 V o lta g e [ R M S , V ] 4. AX3231 2 .0 230V 1 .5 1 .0 0 .5 0 .0 190 200 210 220 230 240 250 260 270 V o lt a g e [ R M S , V ] Rev. 03 May 2008 www.ZLED.com Relative Luminous Flux [a.u.] Relative luminous flux Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 13 Relative Flux – Junction temperature characteristics 1. AX32X1 1 .0 0 .8 0 .6 0 .4 0 .2 p u r e w h ite w a r m w h ite ( C R I 7 0 ) 0 .0 30 40 50 60 70 80 90 o 100 110 120 Ju n c t i o n T e m p er at u r e , T j [ C ] Typical dome type radiation pattern 1. AX32X1 0 1.0 30 0.8 0.6 60 0.4 0.2 0.0 -80 -60 -40 -20 0 Angle (deg.) Rev. 03 May 2008 www.ZLED.com CIE (y) Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 14 Acriche Binning structure graphical representation 1. AX32X1 0.48 0.44 Pure white W arm white Plankian locus SK1 SJ1 SH1 0.40 SV2 SH0 SL1 SJ0 SK0 SL0 SHA SJA SKA SLA SHB SJB SKB SLB 0.36 SX1 SW0 SV1 SV0 0.32 SY0 SX0 SWA 0.28 SYA 0.24 0.24 0.28 0.32 0.36 0.40 0.44 0.48 0.52 CIE (x) *Notes : For more detail Acriche binning, see the Acriche Binning and Labeling document. Rev. 03 May 2008 www.ZLED.com Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 15 Operating instructions of AX32X1 1. Operating temperature Surface Temperature (Ts) Parameter RθjS Tj max Ts max Value 6~7 125 100 Unit ℃/W ℃ ℃ 2. Thermal modeling TA Tj TS TB TA Rθ Tj jS Rθ TS SB Rθ TB BA TA Rθ j TA Notes : [1] Acriche must be used with proper heat management. [2] It is recommended that the temperature of board should be below 70 ℃. [3] For more information, refer to Z Power led Thermal Management Guide. (www.essc.co.kr/_HOMEPAGE/home_kor/product/spec/thermal.pdf) Rev. 03 May 2008 www.ZLED.com Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 16 Operating instructions of AX32X0 3. Heat sink Heat Sink Depth Foot print Area Base Thickness Fin Specification & Size Size : 44 x 44 mm S : 7mm TB : 4mm, FH : 18mm N : 7ea DH : 22.mm Footprint: 745mm2 Power Dissipation:4W TB(ºC) 73.8 RθBA(ºC /W) 10 Specification & Size Size : 50 x 50 mm S: TB : mm, FH : mm N: DH : 25 mm Footprint: 745mm2 Power Dissipation:4W TB(ºC) 56.2 RθBA(ºC /W) 5 Rev. 03 May 2008 www.ZLED.com Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet Note : PCB type Reel Packaging 1. The number of loaded products in the reel is 100ea 2. All dimensions are in millimeters (tolerance : ±0.2 ) 3. Scale none *The appearance and specifications of the product may be changed for improvement without notice. Rev. 03 17 May 2008 www.ZLED.com Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 18 Packaging Structure Aluminum Vinyl Bag PART NO. : ######-## QUANTITY : 100 LOT NUMBER : #######-####### BIN CODE : ####### Outer Box TYPE SIZE(mm) a c b 350 350 370 c ZLED ZLED PART : W42180-** PO CODE : ## Q'YT : ###### LOT NO : YMDD-##### DATE : ###### b a SEOUL SEMICONDUCTOR CO.,LTD Note : 1. 5 reels are loaded in box 2. Scale none 3. For more information about binning and labeling, refer to the Application Note - 1 Rev. 03 May 2008 www.ZLED.com Z-Power LED X10490 Z-Power LED X10490 Technical Data Sheet 19 Precaution for use [1] Acriche series run on high voltage such as 110 V or 220 V. [2] Please don't touch the PCB surface, which has built-in terminals and chips, with your hands or metals, while Acriche series is running. [3] Please don't add or change wires,while Acriche series is running. Handling of silicone resin for LEDS [1] Acriche series is encapsulated by silicone resin for the highest flux efficiency. [2] Notes for handling of Silicone resin Acriche series. [3] Avoid touching silicone resin parts especially by sharp tools such as Pincette (Tweezers). [4] Avoid leaving fingerprints on silicone resin parts. [5] Dust sensitivity silicone resin need containers having cover for storage. [6] When populating boards in SMT production, there are basically no restrictions regarding the form of the pick and place nozzle, except that mechanical pressure on the surface of the resin must be prevent. [7] Please do not force over 3000 gf impact or pressure diagonally on the silicon lens. It will cause fatal damage of this product. [8] Please do not recommend to cover the silicone resin of the Acriche series with other resin (epoxy, urethane, etc). Rev. 03 May 2008 www.ZLED.com