SSC-UBYGFRT821

*Customer: SPECIFICATION ITEM MODEL TOP LED DEVICE SSC-UBYGFRT821 [Contents] 1. Features ------------------------------------------------------------ 2 -----------------------------------3 4 5 5 6 7 8 2. Absolute Maximum Ratings --------------------------------------- 2 3. Electro-optical Characteristics 4. Soldering Profile 5. Outline Dimension 6. P acking --------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- -- -------------- -------------- -------------- ---------------------------------------------------------- 7. Reel Packing Structure 8. Precaution for Use 9. Characteristic Diagram Drawn by Checked by Approved by SSC-QP-0401-06(REV.1.0) SEOUL SEMICONDUCTOR CO.,LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-UBYGFRT821 - 1/8 - 1. Features White colored SMT package and colorless clear window Material : InGaN(Blue) / GaP(Green) / AlGaInP(Red) Additive mixture of color stimuli by independent driving of each chip Suitable for all SMT assembly methods ; Suitable for all soldering methods 2. Absolute Maximum Ratings *1 (Ta=25ºC) Parameter Power Dissipation Forward Current Forward Peak Surge Current Reverse Voltage Operating Temperature Storage Temperature Symbol Pd IF IFM VR Topr Tstg *2 Blue 105 15 40 Value Green 110 30 80 5 -40 ~ +100 -40 ~ +100 Red 75 10 35 Unit mW mA mA V ºC ºC *1 Care is to be taken that power dissipation does not exceed the absolute maximum rating of the product. *2 IFM was measured at TW 0.1msec of pulse width and D 1/10 of duty ratio. SSC-QP-0401-06(REV.1.0) SEOUL SEMICONDUCTOR CO.,LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-UBYGFRT821 - 2/8 - 3. Electro-optical Characteristics (Ta =25ºC) Parameter Forward Voltage Red Green Blue Red Green Blue Red Green Blue Red Green Blue Red Green Blue Red Green Blue R, G, B Symbol VF Condition IF =5mA IF =20mA IF =10mA VR=5V IF =5mA IF =20mA IF =10mA IF =5mA IF =20mA IF =10mA IF =5mA IF =20mA IF =10mA IF =5mA IF =20mA IF =10mA IF =5mA IF =20mA IF =10mA Min 1.4 1.8 2.7 27 15 20 619 565 469 - Typ 1.75 2.2 3 32 20 40 632 574 469 624 570 473 21 32 34 120 Max 2.1 2.6 3.4 10 10 10 37 25 60 629 575 478 - Unit V Reverse Current Luminance Intensity *1 IR IV µA mcd Peak Wavelength λP λd ∆λ nm Dominant Wavelength nm Spectral Bandwidth nm Viewing Angle *2 2 θ½ deg. *1 The luminous intensity IV was measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. *2 2θ½ is the off-axis where the luminous intensity is 1/2 of the peak intensity. SSC-QP-0401-06(REV.1.0) SEOUL SEMICONDUCTOR CO.,LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-UBYGFRT821 - 3/8 - 4. Soldering Profile (1) Reflow Soldering Conditions / Profile Preliminary heat to be at maximum 150ºC for maximum 2 minutes. Soldering heat to be at maximum 240ºC for maximum 10 seconds. 280 Device Surface Temperature [ C] 240 200 160 120 80 40 0 o 0 15 30 45 60 75 90 105 120 135 150 165 180 195 Soldering Times [sec] (2) Wave Soldering Conditions / Profile Preliminary heat to be at maximum 120ºC for maximum 1 minutes. Soldering heat to be at maximum 260ºC for maximum 10 seconds 280 Device Surface Temperature [ C] 240 200 160 120 80 40 0 o 0 15 30 45 60 75 90 105 120 135 150 165 180 195 Soldering Time [sec] (3) Hand Soldering conditions Do not exceed 3 seconds at maximum 300ºC under soldering iron. Note : In case that the soldered products are reused in soldering process, we don’t guarantee the products. SSC-QP-0401-06(REV.1.0) SEOUL SEMICONDUCTOR CO.,LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-UBYGFRT821 - 4/8 - 5. Outline Dimension Common Anode Recommended Solder Pattern Red Cathode Green Cathode Blue Cathode ( Tolerance: ±0.2, Unit: mm ) 6. Packing 1.75±0.1 2.0±0.05 4.0±0.1 1.55 ± 0.05 0.22±0.05 3.5±0.1 8±0.1 5° 1.0±0.1 3.1±0.1 2.22±0.1 8° 11.4 ± 0.1 180 +0 -3 2.0 ± 0.2 LABLE 13 ±0.2 3.83±0.1 9.0 ± 0.3 30° 10 22 60 ( Tolerance: ±0.2, Unit: mm ) (1) Quantity : 2000pcs/Reel (2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm (3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off from the carrier tape at the angle of 10º to the carrier tape (4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package SSC-QP-0401-06(REV.1.0) SEOUL SEMICONDUCTOR CO.,LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-UBYGFRT821 - 5/8 - 7. Reel Packing Structure Reel RANK : QUANTITY : XXXX XXX LOT NUMBER : XXXXXXXXXX PART NUMBER : SSCXXXXXXX SEOUL SEMICONDUCTOR CO., LTD. Aluminum Vinyl Bag RANK : QUANTITY : XXXX XXX LOT NUMBER : XXXXXXXXXX PART NUMBER : SSCXXXXXXX SEOUL SEMICONDUCTOR CO., LTD. Outer Box Structure Material : Paper(SW3B(B)) SIZE (mm) TYPE a c b 7inch 245 220 142 1 SIDE c 1 RANK : QUANTITY : XXXX XXX TOP LED b a LOT NUMBER : XXXXXXXXXX PART NUMBER : SSCXXXXXXX SEOUL SEMICONDUCTOR CO., LTD. SSC-QP-0401-06(REV.1.0) SEOUL SEMICONDUCTOR CO.,LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-UBYGFRT821 - 6/8 - 8. Precaution for use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in a dry box (or a desiccator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5ºC ~30ºC Humidity : maximum 65%HR (2) Attention after open. LED is correspond to SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed; a. After opened the device shall be soldered within a week. b. Keeping of a fraction Temperature : 5 ~ 30ºC Humidity : less than 30% (3) In the case of more than 1 week passed after opening or change color of indicator on desiccant, components shall be dried 10-12hr. at 60±5ºC. (4) In the case of that the components is humided, the components shall be dried; 24Hr at 80±5ºC or 12Hr at 100±5ºC. (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temperature after soldering. (6) Quick cooling shall be avoided. (7) Components shall not be mounted on warped direction of L/F. (8) Anti radioactive ray design is not considered for the products. (9) This device should not be used in any type of fluid such as water, oil, organic solvent etc. When washing is required, IPA should be used. (10) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (11) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (12) The LEDs must be soldered within seven days after opening the moisture-proof packing. (13) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (14) The appearance and specifications of the product may be modified for improvement without notice. SSC-QP-0401-06(REV.1.0) SEOUL SEMICONDUCTOR CO.,LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-UBYGFRT821 - 7/8 - 9. Characteristic Diagram Forward Current vs. Forward Voltage (TA=25ºC) Relative Luminous Intensity vs. Forward Current (TA=25ºC) Relative Luminous Intensity IV / IV (20mA) [Rel.] 100 G re e n 2.0 Forward Current IF [mA] Red Green Blue B lu e Red 10 1.5 1.0 0.5 1 0.0 1 .5 1 .8 2 .1 2 .4 2 .7 3 .0 3 .3 0 5 10 15 20 25 30 35 Forward Voltage VF [V] Forward Current IF [mA] Forward Current Derating Curve Radiation Diagram (TA=25ºC) 40 0 Forward Current IF [mA] 30 -30 30 20 -60 60 10 -90 0 -40 -20 0 20 40 60 80 100 90 Ambient Temperature TA [ºC] SSC-QP-0401-06(REV.1.0) SEOUL SEMICONDUCTOR CO.,LTD. 148-29 Kasan-Dong, Keumchun-Gu, Seoul, 153-023, Korea Phone : 82-2-2106-7305~6 SSC-UBYGFRT821 - 8/8 -