SGM2203-5.0YN3LG/TR

SGM2203 150mA, High Voltage Regulators GENERAL DESCRIPTION FEATURES The SGM2203 series is a set of low power high voltage regulators implemented in CMOS technology which can provide 150mA output current. The device allows input voltage as high as 36V. The SGM2203 series is available in several fixed output voltages. CMOS technology ensures low dropout voltage and low quiescent current.  Low Power Consumption  150mA Nominal Output Current  Low Dropout Voltage  Low Temperature Coefficient  High Input Voltage (up to 36V)  Output Voltage Accuracy: ±3%  Fixed Output Voltage Versions: Although designed primarily as fixed voltage regulators, the device can be used with external components to obtain variable output voltages. 0.8V to 4.7V with 0.1V per Step 5V to 12V with 0.25V per Step  -40℃ to +85℃ Operating Temperature Range The SGM2203 series is available in Green SOT-23, SOT-23-5 and SOT-89-3 packages. It operates over an ambient temperature range of -40℃ to +85℃.  Available in Green SOT-23, SOT-23-5 and SOT-89-3 Packages APPLICATIONS Battery-Powered Equipment Communication Equipment Audio/Video Equipment TYPICAL APPLICATION VIN VIN CIN 1μF SGM2203 VOUT GND VOUT COUT 1μF Figure 1. Typical Application Circuit SG Micro Corp www.sg-micro.com AUGUST 2017 – REV. A. 1 SGM2203 150mA, High Voltage Regulators PACKAGE/ORDERING INFORMATION MODEL VOUT (V) PACKAGE DESCRIPTION ORDERING NUMBER PACKAGE MARKING PACKING OPTION SGM2203-0.9 0.9 SOT-23 SGM2203-0.9YN3LG/TR SW0XX Tape and Reel, 3000 SGM2203-1.0 1.0 SOT-23 SGM2203-1.0YN3LG/TR SW1XX Tape and Reel, 3000 SGM2203-1.1 1.1 SOT-23 SGM2203-1.1YN3LG/TR SW2XX Tape and Reel, 3000 SGM2203-1.2 1.2 SOT-23 SGM2203-1.2YN3LG/TR SW3XX Tape and Reel, 3000 SGM2203-1.5 1.5 SOT-23 SGM2203-1.5YN3LG/TR SW4XX Tape and Reel, 3000 SGM2203-1.8 1.8 SOT-23 SGM2203-1.8YN3LG/TR SW5XX Tape and Reel, 3000 SGM2203-2.5 2.5 SOT-23 SGM2203-2.5YN3LG/TR SW6XX Tape and Reel, 3000 SGM2203-2.8 2.8 SOT-23 SGM2203-2.8YN3LG/TR SW7XX Tape and Reel, 3000 SGM2203-3.0 3.0 SOT-23 SGM2203-3.0YN3LG/TR SW8XX Tape and Reel, 3000 SGM2203-3.3 3.3 SOT-23 SGM2203-3.3YN3LG/TR SW9XX Tape and Reel, 3000 SGM2203-3.6 3.6 SOT-23 SGM2203-3.6YN3LG/TR SWAXX Tape and Reel, 3000 SGM2203-5.0 5.0 SOT-23 SGM2203-5.0YN3LG/TR SWBXX Tape and Reel, 3000 SGM2203-2.5 2.5 SOT-89-3 SGM2203-2.5YK3G/TR SWCXX Tape and Reel, 1000 SGM2203-3.3 3.3 SOT-89-3 SGM2203-3.3YK3G/TR SWDXX Tape and Reel, 1000 SGM2203-3.6 3.6 SOT-89-3 SGM2203-3.6YK3G/TR SWFXX Tape and Reel, 1000 SGM2203-5.0 5.0 SOT-89-3 SGM2203-5.0YK3G/TR SWEXX Tape and Reel, 1000 SGM2203-8.0 8.0 SOT-89-3 SGM2203-8.0YK3G/TR G74XX Tape and Reel, 1000 SGM2203-12 12 SOT-89-3 SGM2203-12YK3G/TR G3FXX Tape and Reel, 1000 SGM2203-3.0 3.0 SOT-89-3 (L-Type) SGM2203-3.0YK3LG/TR SX0XX Tape and Reel, 1000 SGM2203-3.3 3.3 SOT-89-3 (L-Type) SGM2203-3.3YK3LG/TR G75XX Tape and Reel, 1000 SGM2203-3.5 3.5 SOT-89-3 (L-Type) SGM2203-3.5YK3LG/TR G7EXX Tape and Reel, 1000 SGM2203-3.7 3.7 SOT-89-3 (L-Type) SGM2203-3.7YK3LG/TR GB4XX Tape and Reel, 1000 SGM2203-4.0 4.0 SOT-89-3 (L-Type) SGM2203-4.0YK3LG/TR GF3XX Tape and Reel, 1000 SGM2203-4.1 4.1 SOT-89-3 (L-Type) SGM2203-4.1YK3LG/TR GF4XX Tape and Reel, 1000 SGM2203-5.0 5.0 SOT-89-3 (L-Type) SGM2203-5.0YK3LG/TR SX1XX Tape and Reel, 1000 SGM2203-8.0 8.0 SOT-89-3 (L-Type) SGM2203-8.0YK3LG/TR SX2XX Tape and Reel, 1000 SGM2203-9.0 9.0 SOT-89-3 (L-Type) SGM2203-9.0YK3LG/TR SX3XX Tape and Reel, 1000 SGM2203-12 12 SOT-89-3 (L-Type) SGM2203-12YK3LG/TR G40XX Tape and Reel, 1000 SGM2203-3.0 3.0 SOT-23-5 SGM2203-3.0YN5G/TR GDFXX Tape and Reel, 3000 SGM2203-3.3 3.3 SOT-23-5 SGM2203-3.3YN5G/TR GE0XX Tape and Reel, 3000 SGM2203-5.0 5.0 SOT-23-5 SGM2203-5.0YN5G/TR GJ9XX Tape and Reel, 3000 SGM2203-4.2 4.2 SOT-23-5 (L-Type) SGM2203-4.2YN5LG/TR GN9XX Tape and Reel, 3000 SG Micro Corp www.sg-micro.com AUGUST 2017 2 SGM2203 NOTE: The devices are available in fixed output voltages from 0.8V to 4.7V with 0.1V per step, and from 5V to 12V with 0.25V per step. Green (RoHS & HSF): SG Micro Corp defines "Green" to mean Pb-Free (RoHS compatible) and free of halogen substances. If you have additional comments or questions, please contact your SGMICRO representative directly. ABSOLUTE MAXIMUM RATINGS VIN to GND ........................................................ -0.3V to 44V VOUT to GND, VOUT ≤ 5.0V ....... -0.3V to Min(VIN + 0.3V, 6V) VOUT to GND, VOUT > 5.0V ..... -0.3V to Min(VIN + 0.3V, 15V) Power Dissipation, PD @ TA = +25℃ SOT-23 ......................................................................0.411W SOT-23-5 ...................................................................0.411W SOT-23-5 (L-Type) .................................................... 0.517W SOT-89-3 .................................................................. 1.923W SOT-89-3 (L-Type) .................................................... 0.822W Package Thermal Resistance SOT-23, θJA.............................................................. 304℃/W SOT-23-5, θJA .......................................................... 304℃/W SOT-23-5 (L-Type), θJA ............................................ 242℃/W SOT-89-3, θJA ............................................................ 65℃/W SOT-89-3 (L-Type), θJA ............................................ 152℃/W Junction Temperature ................................................ +150℃ Storage Temperature Range........................ -65℃ to +150℃ Lead Temperature (Soldering, 10s) ........................... +260℃ ESD Susceptibility HBM ............................................................................ 4000V MM ................................................................................ 200V CDM ........................................................................... 1000V RECOMMENDED OPERATING CONDITIONS 150mA, High Voltage Regulators MARKING INFORMATION YYY X X Date code - Month ("A" = Jan. "B" = Feb. … "L" = Dec.) Date code - Year ("A" = 2010, "B" = 2011 …) Chip I.D. For example: SW0FA (2015, January) OVERSTRESS CAUTION Stresses beyond those listed may cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational section of the specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. ESD SENSITIVITY CAUTION This integrated circuit can be damaged by ESD if you don’t pay attention to ESD protection. SGMICRO recommends that all integrated circuits be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage. ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more susceptible to damage because very small parametric changes could cause the device not to meet its published specifications. DISCLAIMER SG Micro Corp reserves the right to make any change in circuit design, specification or other related things if necessary without notice at any time. Input Voltage Range ........................................... 2.7V to 36V Operating Temperature Range ...................... -40℃ to +85℃ SG Micro Corp www.sg-micro.com AUGUST 2017 3 SGM2203 150mA, High Voltage Regulators PIN CONFIGURATIONS (TOP VIEW) (TOP VIEW) GND 3 VOUT GND 1 VIN 2 VOUT 3 1 VIN 2 SOT-23 (TOP VIEW) 5 4 VIN 1 GND 2 NC 3 NC NC SOT-23-5 (TOP VIEW) GND VIN VOUT VOUT 4 NC SOT-23-5 (L-Type) (TOP VIEW) 1 5 2 3 1 GND VIN GND SOT-89-3 2 3 VIN VOUT SOT-89-3 (L-Type) PIN DESCRIPTION PIN SOT-23-5 SOT-89-3 SOT-89-3 (L-Type) (L-Type) NAME FUNCTION SOT-23 SOT-23-5 1 1 2 2 1 GND Ground. 2 3 5 1 3 VOUT Regulator Output. Recommended output capacitor range: 1μF to 10μF. 3 2 1 3 2 VIN Regulator Input. Up to 36V input voltage. At least 1μF supply bypass capacitor is recommended. ‒ 4, 5 3, 4 ‒ ‒ NC Not Connect. SG Micro Corp www.sg-micro.com AUGUST 2017 4 SGM2203 150mA, High Voltage Regulators ELECTRICAL CHARACTERISTICS (VIN = VOUT + 2V or 4V, whichever is greater, CIN = COUT = 1μF, Full = -40℃ to +85℃, typical values are at TA = +25℃, unless otherwise noted.) PARAMETER Input Voltage SYMBOL VIN Output Voltage Accuracy CONDITIONS TEMP MIN VOUT < 3.3V Full 2.7 32 VOUT ≥ 3.3V Full 2.7 36 IOUT = 1mA +25℃ -3 3 Ground Pin Current Full IOUT = 50mA +25℃ VDROP +25℃ IOUT = 150mA, VOUT ≥ 2.5V VIN = VOUT + 2V or 4V to 32V, IOUT = 1mA VIN = VOUT + 2V to 36V, IOUT = 1mA MAX UNITS V % 5.5 6.5 μA 4.2 +25℃ Maximum Output Current (1) Dropout Voltage (2) 4.2 +25℃ No load TYP 150 mA 1300 Full 1850 2400 mV VOUT < 3.3V +25℃ 0.005 0.012 VOUT ≥ 3.3V +25℃ 0.005 0.012 ΔVOUT VIN = VOUT + 2V or 4V, IOUT = 1mA to 150mA +25℃ 10 25 Power Supply Rejection Ratio PSRR VOUT = 3.3V, IOUT = 10mA f = 217Hz +25℃ 55 f = 1kHz +25℃ 40 Output Voltage Temperature Coefficient (3) ∆VOUT ∆TA × VOUT Full 68 ppm/℃ TSHDN 150 ℃ ΔTSHDN 20 ℃ Line Regulation ∆VOUT ∆VIN × VOUT Load Regulation IOUT = 1mA %/V mV dB THERMAL PROTECTION Thermal Shutdown Temperature Thermal Shutdown Hysteresis NOTES: 1. Maximum output current is affected by the PCB layout, size of metal trace, the thermal conduction path between metal layers, ambient temperature and the other environment factors of system. Attention should be paid to the dropout voltage when VIN < VOUT + VDROP. 2. The dropout voltage is defined as VIN - VOUT, when VOUT is 95% of the value of VOUT for VIN = VOUT + 2V. 3. Output voltage temperature coefficient is defined as the worst-case voltage change divided by the total temperature range. SG Micro Corp www.sg-micro.com AUGUST 2017 5 SGM2203 150mA, High Voltage Regulators TYPICAL PERFORMANCE CHARACTERISTICS VIN = 5.3V, VOUT = 3.3V, CIN = COUT = 1μF, TA = +25℃, unless otherwise noted. Load-Transient Response Line-Transient Response VIN = 5.3V to 6.3V, IOUT = 50mA IOUT = 10mA to 100mA VIN 100mV/div 50mA/div IOUT 1V/div 100mV/div VOUT VOUT Time (2ms/div) Time (1ms/div) Power-Up/Power-Down Output Waveform Power Ramp-Up/Ramp-Down Output Waveform VOUT VIN = 0V to 5.3V, IOUT = 50mA 2V/div 2V/div VOUT 2V/div 2V/div VIN VIN VIN = 0V to 6.3V, IOUT = 50mA Time (4ms/div) Time (5ms/div) Output Short Waveform Thermal Protection Waveform 1V/div VOUT 100mA/div 2V/div 100mA/div VOUT IOUT IOUT Time (50ms/div) SG Micro Corp www.sg-micro.com Time (4ms/div) AUGUST 2017 6 SGM2203 150mA, High Voltage Regulators TYPICAL PERFORMANCE CHARACTERISTICS VIN = 5.3V, VOUT = 3.3V, CIN = COUT = 1μF, TA = +25℃, unless otherwise noted. Pulse Load Current Output Waveform Power Supply Rejection Ratio vs. Frequency 100 80 1V/div PSRR (dB) VOUT 100mA/div IOUT IOUT = 10mA ∆VRIP = 0.2Vp-p 0 0.01 0.1 Dropout Voltage vs. Temperature 10 100 Dropout Voltage vs. Output Current 1600 IOUT = 50mA 500 450 400 1200 800 400 350 300 -50 0 -25 0 25 50 75 100 0 25 50 Ground Pin Current vs. Temperature 5.5 Maximum Pulse Current (mA) 5.0 4.5 4.0 3.5 3.0 100 125 150 Maximum Pulse Current vs. Headroom Voltage 500 V IN = 36V, No Load 75 Output Current (mA) Temperature (℃) Ground Pin Current (μA) 1 Frequency (kHz) Dropput Voltage (mV) Dropout Voltage (mV) 550 40 20 Time (20ms/div) 600 60 Pulse Width 0.6ms 400 300 200 100 0 -50 -25 0 25 50 Temperature (℃) SG Micro Corp www.sg-micro.com 75 100 0 5 10 15 20 25 30 Headroom Voltage (V) 35 40 AUGUST 2017 7 SGM2203 150mA, High Voltage Regulators APPLICATION INFORMATION Input Capacitor and Output Capacitor Thermal Considerations For stable operation, use a ceramic capacitor (COUT) between 1μF and 10μF. Larger values in this range will help improve load transient response and reduce noise. Output capacitors of other dielectric types may be used, but are not recommended as their capacitance can deviate greatly from their rated value over temperature. The maximum power dissipation is dependent on the thermal resistance of the case and the circuit board, the temperature difference between the die junction and the ambient air, and the rate of air flow. The GND pin must be connected to the ground plane for proper dissipation. For proper operation, place a ceramic capacitor (CIN) between 1μF and 10μF between the input pin and ground. Larger values in this range will help improve line transient response. When the junction temperature is too high, the thermal protection circuitry sends a signal to the control logic that will shutdown the IC. The IC will restart when the temperature has sufficiently cooled down. REVISION HISTORY NOTE: Page numbers for previous revisions may differ from page numbers in the current version. AUGUST 2017 ‒ REV.A to REV.A.1 Added SOT-23-5 package ................................................................................................................................................................................ 2-4 Changes from Original (JUNE 2017) to REV.A Changed from product preview to production data ............................................................................................................................................. All SG Micro Corp www.sg-micro.com AUGUST 2017 8 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-23 D b E1 2.29 E 0.76 0.76 e e1 0.95 RECOMMENDED LAND PATTERN (Unit: mm) L L1 A A1 c θ 0.25 A2 Symbol Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX A 0.900 1.150 0.035 0.045 A1 0.000 0.100 0.000 0.004 A2 0.900 1.050 0.035 0.041 b 0.300 0.500 0.012 0.020 c 0.080 0.150 0.003 0.006 D 2.800 3.000 0.110 0.118 E 1.200 1.400 0.047 0.055 E1 2.250 2.550 0.089 0.100 e 0.950 BSC 0.037 BSC e1 1.900 BSC 0.075 BSC L 0.550 REF 0.022 REF L1 0.300 0.500 0.012 0.020 θ 0° 8° 0° 8° SG Micro Corp www.sg-micro.com TX00031.000 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-23-5 1.90 D e1 E1 2.59 E 0.99 b e 0.69 0.95 RECOMMENDED LAND PATTERN (Unit: mm) L A A1 θ A2 Symbol Dimensions In Millimeters MIN MAX c 0.2 Dimensions In Inches MIN MAX A 1.050 1.250 0.041 0.049 A1 0.000 0.100 0.000 0.004 A2 1.050 1.150 0.041 0.045 b 0.300 0.500 0.012 0.020 c 0.100 0.200 0.004 0.008 D 2.820 3.020 0.111 0.119 E 1.500 1.700 0.059 0.067 E1 2.650 2.950 0.104 0.116 e 0.950 BSC 0.037 BSC e1 1.900 BSC 0.075 BSC SG Micro Corp www.sg-micro.com L 0.300 0.600 0.012 0.024 θ 0° 8° 0° 8° TX00033.000 PACKAGE INFORMATION PACKAGE OUTLINE DIMENSIONS SOT-89-3 D 2.0 A D1 3.0 E E1 0.7 45° b1 L 1.5 b e c e1 1.5 1.0 RECOMMENDED LAND PATTERN (Unit: mm) Symbol Dimensions In Millimeters MIN MAX Dimensions In Inches MIN MAX A 1.400 1.600 0.055 0.063 b 0.320 0.520 0.013 0.020 b1 0.400 0.580 0.016 0.023 c 0.350 0.440 0.014 0.017 D 4.400 4.600 0.173 D1 1.550 REF E 2.300 E1 3.940 0.181 0.061 REF 2.600 0.091 4.250 0.155 0.102 0.167 e 1.500 TYP 0.060 TYP e1 3.000 TYP 0.118 TYP L SG Micro Corp www.sg-micro.com 0.900 1.200 0.035 0.047 TX00045.000 PACKAGE INFORMATION TAPE AND REEL INFORMATION REEL DIMENSIONS TAPE DIMENSIONS P2 W P0 Q1 Q2 Q1 Q2 Q1 Q2 Q3 Q4 Q3 Q4 Q3 Q4 B0 Reel Diameter K0 A0 P1 Reel Width (W1) DIRECTION OF FEED NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF TAPE AND REEL Reel Diameter Reel Width W1 (mm) A0 (mm) B0 (mm) K0 (mm) P0 (mm) P1 (mm) P2 (mm) W (mm) Pin1 Quadrant SOT-23 7″ 9.5 3.15 2.77 1.22 4.0 4.0 2.0 8.0 Q3 SOT-23-5 7″ 9.5 3.20 3.20 1.40 4.0 4.0 2.0 8.0 Q3 SOT-89-3 7″ 13.2 4.85 4.45 1.85 4.0 8.0 2.0 12.0 Q3 SG Micro Corp www.sg-micro.com TX10000.000 DD0001 Package Type PACKAGE INFORMATION CARTON BOX DIMENSIONS NOTE: The picture is only for reference. Please make the object as the standard. KEY PARAMETER LIST OF CARTON BOX Length (mm) Width (mm) Height (mm) Pizza/Carton 7″ (Option) 368 227 224 8 7″ 442 410 224 18 SG Micro Corp www.sg-micro.com DD0002 Reel Type TX20000.000