REG
Power-Loss Voltage Regulators
• TO-220 Type
1
1.4
2
3.3, 5,
9, 12
3.3, 5,
9, 12
24
15
20
○
○
○
A
±2.5
1.0
○
○
○
○
A
○
○
△*6
○
○
2
3
1.5 to
30
18
35
○
○
△*6
○
○
B
2
○
○
△*6
○
○
B
±2*4
0.5
20
Lead forming
available
Variable output
voltage
Package
shape
type*7
TO-220
B
At self-cooling
With infinite heat sink attached
The xxx in the model No. refer to the output voltage values of the model (e.g. 050 for 5 V, 120 for 12 V, 015 for 1.5 V).
Reference voltage precision
Current ratings are defined individually.
△ : Available by adding circuit
Refer to page 35
Mount Type Low Power-Loss Voltage Regulators
•SOT-89 Type
0.5
15
0.9
1.2, 1.5, 1.8,
2.5, 3.3, 5.0
±2.0
1.5 to 9.0
±2.0*4
0.7
○
○
○
○
○
○
○
○
Variable output
voltage
Output Dropout
voltage voltage
precision VI-O*3
(V)
(%)
Low dissipation
current at OFF state
PQ1LAX95MSPQ
Compact, high radiation package,
ceramic capacitor compatible
Ceramic capacitor compatible,
variable output voltage
Output
voltage
Vo*2
(V) TYP.
Built-in functions
ON/OFF control
PQ1LAxx5MSPQ
Power
Output Input
dissipacurrent voltage
tion
Io
Vin
Pd*1
(A)
(V)
(W)
Features
Electrical characteristics
Overcurrent
protection
Model No.
(Ta = 25°C)
Absolute maximum
ratings
Overheat
protection
■ Surface
*1
*2
*3
*4
○
15
1.5
*1
*2
*3
*4
*5
*6
*7
0.5
Package
Power Devices/
Analog ICs
PQ30RV11J00H
PQ30RV31J00H
Low dissipation
current at OFF state
1
Variable output voltage
±3
Power
Output Input dissipation Output Output Dropout
(W)
current voltage
voltage voltage voltage
Io
Vin
Vo*3 precision VI-O*5
(V) TYP. (%)
(V)
(A)
(V)
Pd*1 Pd*2
PQxxxRDA1SZH series ASO protection function,
low dissipation current at
PQxxxRDA2SZH series OFF state (Iqs: 5 µA (MAX.))
PQ30RV21J00H
ON/OFF control
Features
Built-in functions
Overcurrent
protection
Model No.
(Ta = 25°C)
Absolute maximum ratings Electrical characteristics
Overheat
protection
■ Low
LOW POWER-LOSS VOLTAGE REGULATORS /
SURFACE MOUNT TYPE LOW POWER-LOSS VOLTAGE REGULATORS
○
Package
SOT-89
When mounted on a board
The xx in the model No. refer to the output voltage values of the model (e.g. 25 for 2.5 V, 50 for 5.0 V).
Current ratings are defined individually.
Reference voltage precision
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
19
SURFACE MOUNT TYPE
LOW POWER-LOSS VOLTAGE REGULATORS
•SC-63 Type (1) Output Voltage Fixed Type
PQxxxDNA1ZPH series
Ceramic capacitor compatible,
ASO protection function,
low dissipation current at OFF
state (Iqs: 5 µA (MAX.)),
solder dip compatible lead shape
Minimum operating input voltage:
2.35 V,
ceramic capacitor compatible,
solder dip compatible lead shape
PQxxxGN1HZPH series
10
5
○
Minimum operating input voltage:
1.7 V (Dual power supply type),
ceramic capacitor compatible,
solder dip compatible lead shape
○
3.3, 5,
9, 12
○
1.0, 1.2
○
○
–
○
F
○
○
○
○
–
○
F
0.3
○
○
○
○
–
○
0.9
○
○
○
○
–
○
F
○
○
–
○
F
○
○
–
○
F
±30
mV
–
SC-63
F
With infinite heat sink attached
The xxx in the model No. refer to the output voltage values of the model (e.g. 033 for 3.3 V, 050 for 5 V, 120 for 12 V).
Current ratings are defined individually.
Refer to page 35
○
PQ070XNA2ZPH
Minimum operating input voltage:
2.35 V,
ceramic capacitor compatible,
solder dip compatible lead shape
PQ035ZN1HZPH
PQ200WNA1ZPH
PQ200WN3MZPH
○
8
1.5 to 7
(2 A)
Reference voltage (Vref): 0.6 V,
○
minimum operating input voltage:
1.7 V (Dual power supply type),
ceramic capacitor compatible,
○
solder dip compatible lead shape
Minimum operating input voltage:
3.5 V, ASO protection function,
low dissipation current at OFF
○
state (Iqs: 5 µA (MAX.)),
ceramic capacitor compatible,
solder dip compatible lead shape
Minimum operating input voltage:
5.5 V,
○
low dissipation current at OFF
(0.3)
state (Iqs: 5 µA (MAX.)),
ceramic capacitor compatible,
current limit: 800 mA
5
1.2 to 7
0.8 to
3.5
5.5
±30
mV
Taped package
Package
Package
shape
type*4
0.5
○
○
○
○
○
○
F
0.9
○
○
○
○
○
○
F
0.5
○
○
○
○
○
○
F
0.3
○
○
○
○
○
○
F
–
○
○
○
○
F
–
○
○
○
○
○
○
○
○
○
○
F
○
○
○
○
○
○
F
±2.0*2
10
○
PQ070XNB1ZPH
PQ035ZN01ZPH
○
Built-in functions
Low dissipation
current at OFF state
Variable output
voltage
Features
PQ070XNA1ZPH
PQ070XNAHZPH
(Ta = 25°C)
Absolute maximum ratings Electrical characteristics
Output
current
Power Output Output
Input
Dropout
Io
dissi- voltage voltage
voltage
voltage
(A)
pation Vo
preciVin
VI-O*3
Pd*1
(V)
sion
(V)
(V)
(W)
TYP.
(%)
0.5 1 1.5
Overheat
protection
Overcurrent
protection
Model No.
20
Taped package
○
•SC-63 Type (2) Output Voltage Variable Type
*1
*2
*3
*4
Package
shape
type*4
0.5
1.5, 1.8,
2.5, 3.3
1.2, 1.5,
1.8, 2.5, ±2.0
3.3
1.5, 1.8,
2.5, 3.3
8
5.5
Package
○
±2.5
ON/OFF control
*1
*2
*3
*4
8
8
○
PQxxxENAHZPH series
PQxxxGN01ZPH series
24
○
PQxxxENA1ZPH series
PQxxxENB1ZPH series
○
Output Output
Dropout
voltage voltage
voltage
Vo*2 preciVI-O*3
(V)
sion
(V)
TYP.
(%)
Built-in functions
Low dissipation
current at OFF state
Variable output
voltage
Features
Electrical characteristics
ON/OFF control
Model No.
(Ta = 25°C)
Absolute maximum ratings
Output
current
Power
Input
Io
dissivoltage
(A)
pation
Vin
Pd*1
(V)
(W)
0.5 1 1.5
Overheat
protection
Overcurrent
protection
REG
SC-63
F
8
3.0 to
20
±2.5*2
24
6.8
5.0 to
20
0.5
With infinite heat sink attached
Reference voltage precision
Current ratings are defined individually.
Refer to page 35
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
•SOP-8 Type
(Ta = 25°C)
Features
PQ1DX095MZPQ
Built-in sink source function
(For DDR II memory)
Built-in functions
Output
current
Io
(A)
Input
voltage
Vin
(V)
Power
dissipation
Pd*1
(W)
Output voltage
Vo
(V) TYP.
Output
voltage
precision*2
(mV)
Taped package
Model No.
Electrical characteristics
Overcurrent
protection
Absolute maximum ratings
Overheat
protection
REG
SURFACE MOUNT TYPE LOW POWER-LOSS VOLTAGE REGULATORS /
SURFACE MOUNT TYPE CHOPPER REGULATORS
Package
±0.8
6
0.6
VDD x 1/2
(VDDQ: 1.5 V (MIN.))
±25
○
○
○
SOP-8
*1 When mounted on a board
*2 Reference voltage precision
Mount Type Chopper Regulators (DC-DC Converters)
Model No.
PQ6CU12X2APQ
PQ1CN38M2ZPH
PQ1CN41H2ZPH
PQ1CX41H2ZPQ
PQ1CX53H2MPQ
PQ1CX61H1ZPQ
*1
*2
*3
*4
Absolute
maximum ratings
Switch- Power Input
ing
dissipa- voltage
range
current
tion
Vin
Isw
Pd*1
(W)
(V)
(A)
Features
• High switching voltage: 40 V (MAX.)
• For tuner power supply
• Variable oscillation frequency
• Ceramic capacitor compatible
• PWM chopper regulator
(high oscillation frequency)
• Output ON/OFF control function
• Overcurrent/overheat protection circuits
• For light load
• PWM chopper regulator
(high oscillation frequency)
• Overcurrent/overheat protection circuits
• Bootstrap system for high efficiency
(Efficiency 90% (TYP.))
• Low voltage output: 0.8 V (MIN.)
• Ceramic capacitor compatible
• Bootstrap system for high efficiency
(Efficiency 89% (TYP.))
• Low voltage output: 0.8 V (MIN.)
• Ceramic capacitor compatible
• Bootstrap system for high efficiency
(Efficiency 88% (TYP.))
• Low voltage output: 1.0 V (MIN.)
• Ceramic capacitor compatible
0.25
0.35
0.8
8
1.5
1.5
3.5
1.5
8
3.0 to
5.5
Electrical characteristics
Package
Output
voltage*2
Vo
(V)
Output
Oscillation
saturation
Output frequency
voltage
type
fo (Hz)
Vsat (V)
TYP.
TYP.
up to 36
Stepup
StepVREF*3 to 35
down
4.5 to (step-down type)/
–VREF to –30
40
(inverting type)
Stepdown
0.8
When 4.75 to
mounted
27
on board
2
When 4.75 to
mounted
27
on board
0.8
When 4.75 to
mounted
28
on board
(Ta = 25°C)
300 k to
800 k
300 k
Outline
shape
type*4
Ron
SOT-23-6W
TYP. 1.7Ω
0.9
Power Devices/
Analog ICs
■ Surface
F
SC-63
300 k
0.9
0.8 to 20
Stepdown
400 k
RDSon
SOP-8
TYP. 0.45Ω
0.8 to 16
Stepdown
400 k
RDSon
USB-8
TYP. 0.15Ω
1.0 to 18.9
Stepdown
900 k
RDSon
SOP-8
TYP. 0.55Ω
F
With infinite heat sink attached or when mounted on a board listed in the specification sheets.
Output variable range (step-down/inversion).
VREF nearly equal to 1.26 V
Refer to page 35
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
21
REG
■ Chopper
CHOPPER REGULATORS
Regulators (DC-DC Converters)
• TO-220 Type
(Ta = 25°C)
Model No.
PQ1CG21H2FZH
PQ1CG41H2FZH
PQ1CG2032FZH
PQ1CG3032FZH
Absolute
Electrical characteristics
maximum ratings
Switch- Power Input
Oscillation
ing dissipa- voltage Output voltage
Output frequency
range
current tion
Vo*2
type fo (kHz)
(V)
Vin
Isw
Pd*1
TYP.
(W)
(V)
(A)
Features
• PWM chopper regulator
• Built-in overcurrent/overheat protection circuits
• Output ON/OFF control function
• PWM chopper regulator
(high oscillation frequency)
• Built-in overcurrent/overheat protection circuits
• Output ON/OFF control function
• PWM chopper regulator
• Built-in overcurrent/overheat protection circuits
• Output ON/OFF control function
• PWM chopper regulator
(high oscillation frequency)
• Built-in overcurrent/overheat protection circuits
• Output ON/OFF control function
Package
Output
saturation
voltage
Vsat
(V) TYP.
Outline
shape
type*5
100
1.0
E
300
1.0
E
1.5*3
14
40
VREF*4 to 35
(step-down type)/ Step–VREF*4 to –30 down
(inverting type)
TO-220
70
3.5*3
E
1.4
150
E
*1 With infinite heat sink attached
*2 Output voltage variable range
*3 Peak current
*4 VREF nearly equal to 1.26 V (TYP.)
*5 Refer to page 35
22
Notice
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in
equipment using any SHARP devices shown in catalogs, data books, etc.
Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP.
*RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants
(PBBs and PBDEs), with certain exceptions.
Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.