PQ1LAX95MSPQ

PQ1LAX95MSPQ PQ1LAX95MSPQ Compact Surface Mount Type Low Power-Loss Voltage Regulators Features 1.Compact surface mount package (4.5×4.3×1.5mm) 2.Output current : MAX.500mA 3.Power dissipation : MAX.900mW (At mounting PCB shown in Fig.3) 4.Built-in ON/OFF control function 5.Built-in overcurrent, overheat protection functions 6.Use of ceramic capacitor is possible as output smooth capacitor 7.RoHS directive compliant ■ Outline Dimensions (Unit : mm) 1.6±0.2 0.42±0.1 5 2 0.42±0.1 4 0.42±0.1 0.9±0.2 Model No. 0.4±0.05 LX9 A 2.5±0.2 0.9±0.2 1.5±0.2 Applications 1.Power supplies for various electronic equipment such as AV, OA equipment 1 0.42±0.1 2 0.47±0.1 4.5±0.2 3 0.42±0.1 4.3±0.3 Lot No.(OLD DIN standard) ( ) : Typical dimensions Product mass:(0.055g) 1.5±0.2 1.5±0.2 Absolute Maximum Ratings (Ta=25°C) Parameter *1 Internal connection 4 5 Symbol VIN VC VADJ IO PD Tj Topr Tstg Tsol Rating 15 15 5 500 900 150 Unit V V V mA mW °C °C °C °C 3 2 1 2 3 4 5 Input voltage control voltage Output adjustment pin voltage dissipation temperature IC 1 *1 Output *1 Output current *2 Power *3 Junction Output voltage adjustment (VADJ) GND ON/OFF control (VC) DC input (VIN) DC output (VO) Operating temperature Storage temperature Soldering temperature -40 to +85 -55 to +150 270(10s) Lead finish:Lead-free solder plating (Composition: SnBi) *1 All are open except GND and applicable terminals. *2 At surface-mounted condition *3 Overheat protection may operate at Tj:125°C to 150°C Notice The content of data sheet is subject to change without prior notice. In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device. 1 Sheet No.: OP06054 PQ1LAX95MSPQ Electrical Characteristics (Unless otherwise specified condition shall be VIN=3.5,VO=2.48V(R1=R2=10kΩ),IO=30mA,VC=1.8V,Ta=25°C) Symbol VIN VO Output voltage Reference voltage Vref Load regulation RegL Line regulation RegI Temperature coefficient of Reference voltage TCVref Ripple rejection RR Vno(rms) Output noise voltage Dropout voltage VI-O 4 VC(ON) On-state voltage for control IC(ON) On-state current for control VC(OFF) Off-voltage for control Iq Quiescent current Iqs Output off-state consumption current Input voltage Parameter Conditions ― ― ― IO=5 to 500mA VIN=3.5V to 8.5V IO=10mA, Tj=0 to 100°C Refer to Fig.2 10Hz