3RV27114AD10

Data sheet 3RV2711-4AD10 Circuit breaker size S00 for system protection with approval circuit breaker UL 489, CSA C22.2 No.5-02 A-release 15 A N-release 208 A screw terminal Standard switching capacity product brand name SIRIUS product designation Circuit breaker design of the product For system protection according to UL 489/CSA C22.2 No. 5 product type designation 3RV2 General technical data size of the circuit-breaker S00 product extension auxiliary switch Yes power loss [W] for rated value of the current ● at AC in hot operating state 9.25 W ● at AC in hot operating state per pole 3.1 W insulation voltage with degree of pollution 3 at AC rated value 690 V surge voltage resistance rated value 6 kV shock resistance according to IEC 60068-2-27 25g / 11 ms mechanical service life (switching cycles) ● of the main contacts typical 100 000 ● of auxiliary contacts typical 100 000 electrical endurance (switching cycles) typical 100 000 reference code according to IEC 81346-2 Q Substance Prohibitance (Date) 10/01/2009 Ambient conditions installation altitude at height above sea level maximum 2 000 m ambient temperature ● during operation -20 ... +60 °C ● during storage -50 ... +80 °C ● during transport -50 ... +80 °C relative humidity during operation 10 ... 95 % Main circuit number of poles for main current circuit 3 operating voltage ● rated value 20 ... 690 V ● at AC-3 rated value maximum 690 V ● at AC-3e rated value maximum 690 V operating frequency rated value 50 ... 60 Hz operational current rated value 15 A operational current ● at AC-3 at 400 V rated value 15 A ● at AC-3e at 400 V rated value 15 A operating power 3RV27114AD10 Page 1/4 7/6/2022 Subject to change without notice © Copyright Siemens ● at AC-3 — at 230 V rated value 4 kW — at 400 V rated value 7.5 kW — at 500 V rated value 7.5 kW — at 690 V rated value 11 kW ● at AC-3e — at 230 V rated value 4 kW — at 400 V rated value 7.5 kW — at 500 V rated value 7.5 kW — at 690 V rated value 11 kW operating frequency ● at AC-3 maximum 15 1/h ● at AC-3e maximum 15 1/h Auxiliary circuit number of NC contacts for auxiliary contacts 0 number of NO contacts for auxiliary contacts 0 number of CO contacts for auxiliary contacts 0 Protective and monitoring functions product function ● ground fault detection No ● phase failure detection No design of the overload release thermal breaking capacity maximum short-circuit current (Icu) ● at AC at 240 V rated value 100 kA ● at AC at 400 V rated value 55 kA ● at AC at 500 V rated value 10 kA ● at AC at 690 V rated value 4 kA ● at 480 AC Y/277 V according to UL 489 rated value 65 kA breaking capacity operating short-circuit current (Ics) at AC ● at 240 V rated value 100 kA ● at 400 V rated value 30 kA ● at 500 V rated value 5 kA ● at 690 V rated value 2 kA response value current of instantaneous short-circuit trip unit 208 A Short-circuit protection product function short circuit protection Yes design of the short-circuit trip magnetic design of the fuse link for IT network for short-circuit protection of the main circuit ● at 240 V gG 80 A ● at 400 V gG 63 A ● at 500 V gG 50 A ● at 690 V gG 40 A Installation/ mounting/ dimensions mounting position any fastening method screw and snap-on mounting onto 35 mm standard mounting rail according to DIN EN 60715 height 144 mm width 45 mm depth 97 mm required spacing ● for grounded parts at 400 V — downwards 30 mm — upwards 30 mm — at the side 30 mm ● for live parts at 400 V — downwards 30 mm — upwards 30 mm 3RV27114AD10 Page 2/4 7/6/2022 Subject to change without notice © Copyright Siemens — at the side 30 mm ● for grounded parts at 500 V — downwards 30 mm — upwards 30 mm — at the side 30 mm ● for live parts at 500 V — downwards 30 mm — upwards 30 mm — at the side 30 mm ● for grounded parts at 690 V — downwards 70 mm — upwards 70 mm — backwards 0 mm — at the side 30 mm — forwards 0 mm ● for live parts at 690 V — downwards 70 mm — upwards 70 mm — backwards 0 mm — at the side 30 mm — forwards 0 mm Connections/ Terminals type of electrical connection ● for main current circuit screw-type terminals arrangement of electrical connectors for main current circuit Top and bottom type of connectable conductor cross-sections ● for main contacts — solid or stranded 1 ... 10 mm², max. 2x 10 mm² — finely stranded with core end processing 1 ... 16 mm², max. 6 + 16 mm² ● at AWG cables for main contacts 2x (14 ... 10) tightening torque ● for main contacts with screw-type terminals 2.5 ... 3 N·m design of screwdriver shaft Diameter 5 to 6 mm size of the screwdriver tip Pozidriv size 2 design of the thread of the connection screw ● for main contacts M4 Safety related data B10 value ● with high demand rate according to SN 31920 5 000 proportion of dangerous failures ● with low demand rate according to SN 31920 50 % ● with high demand rate according to SN 31920 50 % failure rate [FIT] ● with low demand rate according to SN 31920 50 FIT T1 value for proof test interval or service life according to IEC 61508 10 y protection class IP on the front according to IEC 60529 IP20 touch protection on the front according to IEC 60529 finger-safe, for vertical contact from the front display version for switching status Handle Certificates/ approvals General Product Approval Confirmation 3RV27114AD10 Page 3/4 7/6/2022 KC Subject to change without notice © Copyright Siemens Declaration of Conformity Test Certificates Type Test Certificates/Test Report Marine / Shipping other Confirmation Marine / Shipping Special Test Certificate Railway Vibration and Shock Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RV2711-4AD10 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RV2711-4AD10 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3RV2711-4AD10 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3RV2711-4AD10&lang=en Characteristic: Tripping characteristics, I²t, Let-through current https://support.industry.siemens.com/cs/ww/en/ps/3RV2711-4AD10/char Further characteristics (e.g. electrical endurance, switching frequency) http://www.automation.siemens.com/bilddb/index.aspx?view=Search&mlfb=3RV2711-4AD10&objecttype=14&gridview=view1 last modified: 3RV27114AD10 Page 4/4 6/25/2022 7/6/2022 Subject to change without notice © Copyright Siemens