3SE51140CH011AC5

Data sheet 3SE5114-0CH01-1AC5 Position switch Metal enclosure 40 mm according to EN 50041 1 NO/1 NC quick action contacts with M12 connector, 5-pole, fixed PIN assignment: PIN1=21, PIN2=22 PIN3=13, Pin4=14, PIN5=PE Rotary actuator right and/or left adjustable, metal lever 27 mm long and plastic roller 19 mm product brand name SIRIUS product designation Mechanical position switches product type designation 3SE5 manufacturer's article number ● of the supplied basic switch 3SE5114-0CA00-0AC5 ● of the supplied actuator head for position switches 3SE5000-0AH00 ● of the supplied operating lever 3SE5000-0AA01 ● of the supplied switching contacts 3SE5000-0CA00 suitability for use safety switch Yes General technical data product function positive opening Yes insulation voltage rated value 125 V degree of pollution class 3 surge voltage resistance rated value 1.5 kV protection class IP IP66/IP67 shock resistance ● acc. to IEC 60068-2-27 30g / 11 ms vibration resistance acc. to IEC 60068-2-6 0.35 mm/5g mechanical service life (switching cycles) typical 15 000 000 electrical endurance (switching cycles) with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 typical 10 000 000 Electrical operating cycles in one hour with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 6 000 thermal current 4A material of the enclosure of the switch head plastic reference code acc. to IEC 81346-2 B continuous current of the C characteristic MCB 1 A; for a short-circuit current smaller than 400 A continuous current of the quick DIAZED fuse link 4 A; for a short-circuit current smaller than 400 A continuous current of the DIAZED fuse link gG 4A active principle mechanical repeat accuracy 0.05 mm minimum actuating torque in directions of actuation 0.25 N·m length of the sensor 141.5 mm width of the sensor 40 mm design of the switching contact mechanical operating frequency rated value 50 ... 60 Hz number of NC contacts for auxiliary contacts 1 3SE51140CH011AC5 Page 1/2 12.19.2020 Subject to change without notice © Copyright Siemens number of NO contacts for auxiliary contacts 1 operational current at AC-15 ● at 24 V rated value 4A ● at 125 V rated value 4A operational current at DC-13 ● at 24 V rated value 3A ● at 125 V rated value 0.55 A design of the interface for safety-related communication without Enclosure design of the housing block, narrow material of the enclosure metal coating of the enclosure cathodic immersion coating design of the housing acc. to standard Yes Drive Head design of the actuating element Twist lever, metal lever, 27 mm long, step 9 mm, plastic roller 19 mm standard-compliant actuator head EN 50041, design A shape of the switch head roller design of the switching function positive opening circuit principle snap-action contacts number of switching contacts safety-related 1 Connections/ Terminals type of electrical connection M12 plug, fixed cable entry type M12 plug design of plug-in connection M12 plug, 5-pole: Pin 1 = terminal 21, Pin 2 = 22, Pin 3 = 13, Pin 4 = 14, Pin 5 = PU Communication/ Protocol design of the interface without Ambient conditions explosion protection category for dust none Installation/ mounting/ dimensions mounting position any fastening method screw fixing Certificates/ approvals Functional Safety/Safety of Machinery General Product Approval Type Examination Certificate Declaration of Conformity Miscellaneous Test Certificates Type Test Certificates/Test Report other Type Test Certificates/Test Report Confirmation Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3SE5114-0CH01-1AC5 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3SE5114-0CH01-1AC5 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3SE5114-0CH01-1AC5 3SE51140CH011AC5 Page 2/3 12.19.2020 Subject to change without notice © Copyright Siemens Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3SE5114-0CH01-1AC5&lang=en 3SE51140CH011AC5 Page 3/4 12.19.2020 Subject to change without notice © Copyright Siemens 3SE51140CH011AC5 Page 4/5 12.19.2020 Subject to change without notice © Copyright Siemens last modified: 3SE51140CH011AC5 Page 5/5 8/31/2020 12.19.2020 Subject to change without notice © Copyright Siemens