3SE5244-0LE10-1AE0

Data sheet 3SE5244-0LE10-1AE0 Position switch Plastic enclosure, 50 mm Device connection 2 x (M20 x 1.5) 1 NO/2 NC quick action contacts with M12 connector, 4-pole on the right, 2 NC connected Pin assignment: Pin1=21, Pin2=22 Pin3=31, Pin4=32 max. 250 V and 4 A Roller lever with plastic roller 13 mm product brand name SIRIUS product designation Mechanical position switches product type designation 3SE5 manufacturer's article number ● of the supplied actuator head for position switches 3SE5000-0AE10 ● of the supplied switching contacts 3SE5000-0LA00 suitability for use safety switch Yes General technical data product function positive opening Yes insulation voltage rated value 250 V degree of pollution class 3 surge voltage resistance rated value 3 kV protection class IP IP66/IP67 shock resistance ● according to IEC 60068-2-27 30g / 11 ms vibration resistance ● according to IEC 60068-2-6 0.35 mm/5g mechanical service life (switching cycles) typical 15 000 000 electrical endurance (switching cycles) at AC-15 at 230 V typical 100 000 electrical endurance (switching cycles) with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 typical 10 000 000 Electrical operating cycles in one hour with contactor 3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025, 3RT1026 6 000 thermal current 4A material of the enclosure of the switch head plastic reference code according to IEC 81346-2 B continuous current of the C characteristic MCB 1 A; for a short-circuit current smaller than 400 A continuous current of the quick DIAZED fuse link 4 A; for a short-circuit current smaller than 400 A continuous current of the DIAZED fuse link gG 4A active principle mechanical repeat accuracy 0.05 mm Substance Prohibitance (Date) 07/01/2006 minimum actuating force in directions of actuation 10 N length of the sensor 91.5 mm width of the sensor 50 mm design of the switching contact mechanical operating frequency rated value 50 ... 60 Hz number of NC contacts for auxiliary contacts 2 3SE52440LE101AE0 Page 1/3 7/9/2022 Subject to change without notice © Copyright Siemens number of NO contacts for auxiliary contacts 0 operational current at AC-15 ● at 24 V rated value 4A ● at 125 V rated value 4A ● at 240 V rated value 4A operational current at DC-13 ● at 24 V rated value 3A ● at 125 V rated value 0.55 A ● at 250 V rated value 0.27 A design of the interface for safety-related communication without Enclosure design of the housing block, wide material of the enclosure plastic coating of the enclosure Other types design of the housing according to standard No Drive Head design of the actuating element Roller lever, metal lever, plastic roller standard-compliant actuator head EN 50047, design E shape of the switch head roller design of the switching function positive opening circuit principle snap-action contacts number of switching contacts safety-related 2 Connections/ Terminals type of electrical connection M12 plug, fixed cable entry type M12 plug design of plug-in connection M12 plug, 4-pole: Pin 1 = terminal 21, Pin 2 = 22, Pin 3 = 31, Pin 4 = 32 Communication/ Protocol design of the interface without Ambient conditions ambient temperature ● during operation -25 ... +85 °C ● during storage -40 ... +90 °C explosion protection category for dust none Installation/ mounting/ dimensions mounting position any fastening method screw fixing Certificates/ approvals General Product Approval Confirmation Functional Safety/Safety of Machinery Type Examination Certificate Declaration of Conformity Test Certificates Type Test Certificates/Test Report other Type Test Certificates/Test Report Confirmation Further information Information- and Downloadcenter (Catalogs, Brochures,…) https://www.siemens.com/ic10 Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3SE5244-0LE10-1AE0 Cax online generator 3SE52440LE101AE0 Page 2/3 7/9/2022 Subject to change without notice © Copyright Siemens http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3SE5244-0LE10-1AE0 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/3SE5244-0LE10-1AE0 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, EPLAN macros, ...) http://www.automation.siemens.com/bilddb/cax_de.aspx?mlfb=3SE5244-0LE10-1AE0&lang=en last modified: 3SE52440LE101AE0 Page 3/3 3/23/2022 7/9/2022 Subject to change without notice © Copyright Siemens