6ES71444GF010AB0

Data sheet 6ES7144-4GF01-0AB0 SIMATIC DP, Electronic module for ET 200 PRO 4 AI I High Feature, +-20 mA; 0...20 mA; 4-20mA; Channel diagnostics; incl. bus module, Connection module IO 6ES7194-4..00-0AA0 order separately Supply voltage Rated value (DC) 24 V Reverse polarity protection Yes; against destruction Input current from supply voltage 1L+, max. 40 mA; Typical from backplane bus 3.3 V DC, max. 12 mA; Typical Encoder supply Number of outputs 4 Short-circuit protection Yes; per module, electronic to frame Output current ● up to 55 °C, max. 1A Power loss Power loss, typ. 1.1 W Address area Address space per module ● Address space per module, max. 8 byte Analog inputs Number of analog inputs 4 permissible input current for current input (destruction limit), max. 40 mA Cycle time (all channels) max. 10 ms Input ranges (rated values), currents ● 0 to 20 mA — Input resistance (0 to 20 mA) ● -20 mA to +20 mA — Input resistance (-20 mA to +20 mA) ● 4 mA to 20 mA — Input resistance (4 mA to 20 mA) Yes 50 Ω Yes 50 Ω Yes 50 Ω Cable length ● shielded, max. 30 m Analog value generation for the inputs Measurement principle integrating Integration and conversion time/resolution per channel ● Resolution with overrange (bit including sign), max. 15 bit; 15 bit + sign at ±10 V, at ±5 V; 15 bit at 0 V to 10 V, at 1 V to 5 V ● Integration time (ms) 0,3 / 16,7 / 20 / 60 ● Interference voltage suppression for interference frequency f1 in Hz 16,67 / 50 / 60 / 3 600 6ES71444GF010AB0 Page 1/2 1.19.2021 Subject to change without notice © Copyright Siemens ● Conversion time (per channel) 1.1 ms Smoothing of measured values ● parameterizable Yes ● Step: None Yes; 1x cycle time ● Step: low Yes; 4x cycle time ● Step: Medium Yes; 16x cycle time ● Step: High Yes; 64x cycle time Encoder Connection of signal encoders ● for current measurement as 2-wire transducer Yes ● for current measurement as 4-wire transducer Yes Errors/accuracies Linearity error (relative to input range), (+/-) 0.0075 % Temperature error (relative to input range), (+/-) 0.00075 %/K Crosstalk between the inputs, min. -70 dB Repeat accuracy in steady state at 25 °C (relative to input range), (+/-) 0.004 % Operational error limit in overall temperature range ● Current, relative to input range, (+/-) 0.1 % Basic error limit (operational limit at 25 °C) ● Current, relative to input range, (+/-) 0.075 % Interference voltage suppression for f = n x (f1 +/- 0.5 %), f1 = interference frequency ● Series mode interference (peak value of interference < rated value of input range), min. 60 dB ● Common mode interference (USS < 2.5 V), min. 80 dB; Interference voltage < 5 V Interrupts/diagnostics/status information Diagnostics function Yes Alarms ● Diagnostic alarm Yes; Parameterizable ● Hardware interrupt Yes; (limit value alarm), can be parameterized for channel 0 Diagnoses ● Diagnostic information readable Yes ● Wire-break Yes; at 4 to 20 mA ● Short-circuit Yes; at 4 to 20 mA Diagnostics indication LED ● Group error SF (red) Yes Potential separation Potential separation analog inputs ● between the channels No ● between the channels and backplane bus Yes Permissible potential difference Between the inputs and MANA (UCM) 5 Vpp AC Isolation Isolation tested with 707 V DC (type test) Dimensions Width 45 mm Height 130 mm Depth 35 mm Weights Weight, approx. 150 g last modified: 12/19/2020 6ES71444GF010AB0 Page 2/2 1.19.2021 Subject to change without notice © Copyright Siemens