S-5816A-H4T1

Rev.1.1_01 CMOS TEMPERATURE SENSOR IC S-5815A/5816A Series The S-5815A/5816A Series is a family of high-precision temperature sensor ICs on a single chip with a linear output voltage for temperature changes. Each chip is composed of a temperature sensor, a constant current circuit, and an operational amplifier. It can be used at temperatures ranging from –40°C to 100°C. These devices have much better linearity than other temperature sensors such as thermistors, and can be used for a wide range of temperature control applications. Features • Temperature accuracy • Linear output voltage S-5815A Series : ±5.0°C (–30 to 100°C) S-5816A Series : ±2.5°C (–30 to 100°C) –11.04 mV/°C typ. Ta = −30°C : 2.582 V typ. Ta = +30°C : 1.940 V typ. Ta = +100°C : 1.145 V typ. ±0.5% typ. (–20 to 80°C) VDD = 2.4 to 10.0 V (25°C) 4.0 µA typ. (25°C) • • • • • • • Nonlinearity Wide power supply voltage operation Low current consumption Built-in operational amplifier Output voltage referred to VSS Small package Lead-free products WLP-4B Applications • • • • • • • Compensation of high-frequency circuits such as cellular phones and radio equipment Compensation of oscillation frequency in crystal oscillator LCD contrast compensation Compensation of amplifier gain Compensation of auto focus circuits Temperature detection in battery management Overheating prevention for charged batteries or halogen lights Package Package Name WLP-4B Package HB004-B Drawing Code Tape HB004-B Reel HB004-B Seiko Instruments Inc. 1 CMOS TEMPERATURE SENSOR IC S-5815A/5816A Series Block Diagram VDD Rev.1.1_01 VOUT Temperature sensor VSS Figure 1 2 Seiko Instruments Inc. Rev.1.1_01 Product Name Structure CMOS TEMPERATURE SENSOR IC S-5815A/5816A Series • The product types for the S-5815A/5816A Series can be selected at the user’s request. Please refer to “1. Product name” for the construction of the product name and “2. Product name list” for the full product names. 1. Product name S-581 x A - H4T1 Package name (abbreviation) and packing specifications H4T1 : WLP-4B, Tape Product type 5 : Temperature accuracy ±5.0°C 6 : Temperature accuracy ±2.5°C *1. Refer to the taping specifications at the end of this book. *1 2. Product name list Table 1 Product Name S-5815A-H4T1 S-5816A-H4T1 Temperature Accuracy ±5.0°C ±2.5°C Package WLP-4B WLP-4B Seiko Instruments Inc. 3 CMOS TEMPERATURE SENSOR IC S-5815A/5816A Series Pin Configuration W LP-4B Top view Rev.1.1_01 Table 2 Pin No. Pin Name Pin Description Power supply pin GND pin GND pin Output voltage pin 4 1 S-5815A 3 2 1 VDD VSS*1 2 VSS*1 3 4 VOUT *1. Connect both VSS pins to GND. Figure 2 W LP-4B Top view 4 1 S-5816A 3 2 Figure 3 W LP-4B Bottom view 1 4 2 3 S-5815A/S-5816A Figure 4 Absolute Maximum Ratings Table 3 Item Power supply pin voltage Output voltage Power dissipation Operating ambient temperature Storage temperature VDD VOUT PD Topr Tstg Symbol (Ta = 25°C unless otherwise specified) Absolute Maximum Rating Unit VSS – 0.3 to VSS + 12.0 VSS – 0.3 to VDD + 0.3 290 *1 V V mW °C °C –40 to +100 –40 to +125 *1. At mounted on printed circuit board [Mounted board] (1) Board size: 114.3 mm × 76.2 mm × t1.6 mm (2) Board name: JEDEC STANDARD51-7 Caution The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. 4 Seiko Instruments Inc. Rev.1.1_01 Electrical Characteristics 1. S-5815A Series CMOS TEMPERATURE SENSOR IC S-5815A/5816A Series Item Power supply voltage Symbol VDD Table 4 (Ta = 25°C, VDD = 5.0 V, IOUT = 0 A unless otherwise specified) Test Conditions Min. Typ. Max. Unit Circuit − Ta = −20 to 100°C Ta = −30 to 100°C Ta = −30°C 2.40 2.65 2.90 2.528 1.886 1.091 − −40 − − − − − − 2.582 1.940 1.145 ±0.5 − 4.0 − − 10.00 10.00 10.00 2.636 1.994 1.199 − 100 8.0 0.05 1.0 V V V V V V mV/°C % °C µA %/V mV 1 1 1 1 1 1 − − − 1 2 2 Output voltage Temperature sensitivity Nonlinearity Operating temperature range Current consumption Line regulation Load regulation*1 VOUT VSE ∆NL Topr IDD ∆VOUT1 ∆VOUT2 Ta = 30°C Ta = 100°C Ta = −30 to 100°C Ta = −20 to 80°C − − VDD = 2.4 to 10.0 V IOUT = 0 to 200 µA −11.31 −11.04 −10.77 *1. Do not flow current into the output voltage pin. 2. S-5816A Series Table 5 (Ta = 25°C, VDD = 5.0 V, IOUT = 0 A unless otherwise specified) Test Conditions Min. Typ. Max. Unit Circuit − Power supply voltage VDD Ta = −20 to 100°C Ta = −30 to 100°C Ta = −30°C Output voltage Temperature sensitivity Nonlinearity Operating temperature range Current consumption Line regulation Load regulation*1 VOUT VSE ∆NL Topr IDD ∆VOUT1 ∆VOUT2 Ta = 30°C Ta = 100°C Ta = −30 to 100°C Ta = −20 to 80°C − − VDD = 2.4 to 10.0 V IOUT = 0 to 200 µA 2.40 2.65 2.90 2.555 1.913 1.118 − −40 − − − − − − 2.582 1.940 1.145 ±0.5 − 4.0 − − 10.00 10.00 10.00 2.609 1.967 1.172 − 100 8.0 0.05 1.0 V V V V V V mV/°C % °C µA %/V mV 1 1 1 1 1 1 − − − 1 2 2 Item Symbol −11.31 −11.04 −10.77 *1. Do not flow current into the output voltage pin. Seiko Instruments Inc. 5 CMOS TEMPERATURE SENSOR IC S-5815A/5816A Series Test Circuits 1. A VDD S-5815A/5816A Series VSS V V VOUT Rev.1.1_01 Figure 5 2. VDD S-5815A/5816A Series VSS V V VOUT A IOUT Figure 6 6 Seiko Instruments Inc. Rev.1.1_01 Explanation of Terms 1. Output voltage (VOUT) CMOS TEMPERATURE SENSOR IC S-5815A/5816A Series VOUT indicates the output voltage at Ta = –30°C, Ta = 30°C, and Ta = 100°C. Output voltage (VOUT) Max. Min. −30°C 0°C 30°C Temperature (Ta) 100°C Figure 7 Seiko Instruments Inc. 7 CMOS TEMPERATURE SENSOR IC S-5815A/5816A Series 2. Temperature sensitivity (VSE) Rev.1.1_01 VSE indicates the temperature coefficient of the output voltage calculated using the output voltage at Ta = −30°C and Ta = 100°C. VSE is calculated using the following formula. VSE = [V OUT *1 − VOUT *2 130 *3 ] Output voltage (VOUT) VOUT (at Ta = −30°C) VSE VOUT (at Ta = 100°C) −30°C 0°C 30°C Temperature (Ta) 100°C Figure 8 *1. VOUT value at Ta = 100°C [V] . *2. VOUT value at Ta = −30°C [V] . *3. The difference of the temperature from Ta = 100°C to Ta = −30°C [°C] . 8 Seiko Instruments Inc. Rev.1.1_01 3. Nonlinearity (∆NL) CMOS TEMPERATURE SENSOR IC S-5815A/5816A Series ∆NL indicates the nonlinearity of the output voltage and is defined as the difference of the characteristic curve of the output voltage and the approximation line shown below. ∆NL is calculated using the following formula. ∆N L = a *1 × 100 b*2 Output voltage (VOUT) a VOUT (at Ta = −20°C) a (B) Actual measurement of output voltage b a (A) Approximation line VOUT (at Ta = 80°C) −20°C 0°C Temperature (Ta) 80°C *1. The maximum deviation of the actual measurement of output voltage (B) and an approximation line (A) in temperature within −20°C to 80°C. The approximation line is the line drawn so that “a” should be the minimum value. *2. The difference of the output voltage within −20°C to 80°C. Figure 9 4. Line regulation (∆VOUT1) ∆VOUT1 indicates the output voltage dependency of the input voltage. That is, the values express how the output voltage changes, when input voltage is changed under the condition that output current is fixed. 5. Load regulation (∆VOUT2) ∆VOUT2 indicates the output voltage dependency of the output current. That is, the values express how the output voltage changes, when output current is changed under the condition that input voltage is fixed. Seiko Instruments Inc. 9 CMOS TEMPERATURE SENSOR IC S-5815A/5816A Series Precautions • Wiring patterns for the VDD pin, VOUT pin, and VSS pin should be designed to hold low impedance. Rev.1.1_01 • In this IC, if load capacitance of the VOUT pin is large, VOUT pin voltage may oscillate. It is recommended not to use the external capacitor between the VOUT and VSS pins. When using an external capacitor, mount it near the VOUT pin. When connecting an A/D converter etc. to the VOUT pin, the input pin capacitance of the A/D converter and the parasitic capacitance component between wires are included as load capacitance. To prevent oscillation, it is recommended to use the following output load condition. Load capacitance of VOUT pin (CL) : 2.2 µF or less VDD S-5815A/5816A Series VSS VOUT CL VOUT Figure 10 Caution The above connection diagram and constant will not guarantee successful operation. Perform through evaluation using the actual application to set the constant. • Please do not connect a pull-up resistor to the output voltage pin. • The application condition for input voltage, output voltage and load voltage must not exceed the package power dissipation. • Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic protection circuit. • SII claims no responsibility for any disputes arising out of or in connection with any infringement by products including this IC of patents owned by a third party. 10 Seiko Instruments Inc. Rev.1.1_01 Characteristics (Typical Data) 1. Output voltage (VOUT) vs. Temperature (Ta) 3.0 2.8 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 CMOS TEMPERATURE SENSOR IC S-5815A/5816A Series 2. Current consumption (IDD) vs. Temperature (Ta) 10.0 9.0 8.0 7.0 6.0 5.0 4.0 3.0 2.0 1.0 0 VDD = 10.0 V VDD = 5.0 V VOUT [V] IDD [µA] VDD = 2.4 V −40 −20 0 20 40 Ta [°C] 60 80 100 −40 −20 0 20 40 Ta [°C] 60 80 100 3. Error range of each temperature Difference between the temperature converted into approximation line and actual temperature [°C] 6 4 2 0 −2 −4 −6 −40 −20 0 20 40 Ta [°C] 60 80 100 Approximation line: VOUT [mV] = −11.02 [mV/°C] × Ta [°C] + 2245 [mV] 4. Current consumption (IDD) vs. Power supply voltage (VDD) 10 9 8 7 6 5 4 3 2 1 0 IDD [µA] Ta = −40°C Ta = 30°C Ta = 100°C 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 VDD [V] 5. Output voltage (VOUT) vs. Power supply voltage (VDD) 2.684 2.683 2.682 2.681 2.680 2.679 2.678 2.677 2.676 2.675 2.674 Ta = −40°C 1.941 1.940 1.939 1.938 1.937 1.936 1.935 1.934 1.933 1.932 1.931 Ta = 30°C VOUT [V] 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 VDD [V] VOUT [V] 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 VDD [V] 1.150 1.149 1.148 1.147 1.146 1.145 1.144 1.143 1.142 1.141 1.140 Ta = 100°C VOUT [V] 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0 VDD [V] Seiko Instruments Inc. 11 CMOS TEMPERATURE SENSOR IC S-5815A/5816A Series 6. Output voltage (VOUT) vs. Load current (IOUT) 3.0 2.5 Ta = −40°C VDD = 2.4 V 3.0 2.5 Ta = −40°C Ta = 30°C Ta = 100°C Rev.1.1_01 VDD = 5.0 V VOUT [V] 1.5 1.0 0.5 0 Ta = 30°C Ta = 100°C VOUT [V] 2.0 2.0 1.5 1.0 0.5 0 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 IOUT [mA] 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 IOUT [mA] VDD = 10.0 V 3.0 2.5 Ta = −40°C Ta = 30°C Ta = 100°C VOUT [V] 2.0 1.5 1.0 0.5 0 0 2.0 4.0 8.0 6.0 IOUT [mA] 10.0 12.0 7. Heat response Output voltage (VOUT) vs. Time (t) When packages are put into the air of 100°C from the air of 25°C 2.1 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 0 30 60 90 120 150 180 210 240 t [s] When packages are put into the liquid of 100°C from the air of 25°C 2.1 2.0 1.9 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 0 20 40 60 10 30 50 t [s] VOUT [V] 8. Start up response Ta = 25°C, CL = 100 pF, RL = 10 MΩ VDD (= 5.0 V) VOUT t (50 µs / div.) Ta = 25°C, CL = 100 pF, RL = 10 MΩ 1 V / div. GND 1 V / div. GND VOUT [V] VDD (= 2.4 V) VOUT t (50 µs / div.) 1 V / div. GND 1 V / div. GND 12 Seiko Instruments Inc. 0.84±0.02 4 3 0.84±0.02 1 2 0.58max. 0.40±0.02 S 0.06 S ø0.20±0.02 0.58max. 0.13±0.03 (0.5) 4-(ø0.20) ø0.05 M S AB A 0.5 1 B 2 4 3 No. HB004-B-P-SD-1.0 TITLE No. SCALE UNIT WLP-4B-B-PKG Dimensions HB004-B-P-SD-1.0 Seiko Instruments Inc. ø1.5 -0 +0.1 2.0±0.05 4.0±0.1 0.18±0.05 ø0.35±0.05 4.0±0.1 0.73±0.05 Count mark(R0.3,Depth 0.2) (Every 10 pockets) 1.16 1.1 0.7 0.93±0.05 0.95 2 3 1 4 Feed direction No. HB004-B-C-SD-1.0 TITLE No. SCALE UNIT WLP-4B-B-Carrier Tape HB004-B-C-SD-1.0 mm Seiko Instruments Inc. 12.5max. 9.0±0.3 Enlarged drawing in the central part ø13±0.2 No. HB004-B-R-SD-1.0 TITLE No. SCALE UNIT WLP-4B-B-Reel HB004-B-R-SD-1.0 QTY. mm 3,000 Seiko Instruments Inc. • • • • • • The information described herein is subject to change without notice. Seiko Instruments Inc. is not responsible for any problems caused by circuits or diagrams described herein whose related industrial properties, patents, or other rights belong to third parties. The application circuit examples explain typical applications of the products, and do not guarantee the success of any specific mass-production design. When the products described herein are regulated products subject to the Wassenaar Arrangement or other agreements, they may not be exported without authorization from the appropriate governmental authority. Use of the information described herein for other purposes and/or reproduction or copying without the express permission of Seiko Instruments Inc. is strictly prohibited. The products described herein cannot be used as part of any device or equipment affecting the human body, such as exercise equipment, medical equipment, security systems, gas equipment, or any apparatus installed in airplanes and other vehicles, without prior written permission of Seiko Instruments Inc. Although Seiko Instruments Inc. exerts the greatest possible effort to ensure high quality and reliability, the failure or malfunction of semiconductor products may occur. The user of these products should therefore give thorough consideration to safety design, including redundancy, fire-prevention measures, and malfunction prevention, to prevent any accidents, fires, or community damage that may ensue.