534MC000260DG

Si 5 34 REVISION D Q UAD F R E Q U E N C Y C RY STA L O S C I L L ATO R ( X O ) ( 1 0 MH Z TO 1 . 4 G H Z ) Features  Si5602 Available with any-rate output  frequencies from 10 MHz to 945 MHz and select frequencies to 1.4 GHz  Four selectable output frequencies  ®  3rd generation DSPLL with superior  jitter performance   3x better frequency stability than SAW-based oscillators Internal fixed crystal frequency ensures high reliability and low aging Available CMOS, LVPECL, LVDS, and CML outputs 3.3, 2.5, and 1.8 V supply options Industry-standard 5 x 7 mm package and pinout  Pb-free/RoHS-compliant Ordering Information: Applications See page 7.     SONET/SDH Networking  SD/HD video Test and measurement Clock and data recovery  FPGA/ASIC clock generation Pin Assignments: See page 6. Description (Top View) The Si534 quad frequency XO utilizes Skyworks Solutions’ advanced DSPLL® circuitry to provide a low jitter clock at high frequencies. The Si534 is available with any-rate output frequency from 10 to 945 MHz and select frequencies to 1400 MHz. Unlike a traditional XO where a different crystal is required for each output frequency, the Si534 uses one fixed crystal to provide a wide range of output frequencies. This IC-based approach allows the crystal resonator to provide exceptional frequency stability and reliability. In addition, DSPLL clock synthesis provides superior supply noise rejection, simplifying the task of generating low jitter clocks in noisy environments typically found in communication systems. The Si534 IC-based XO is factory configurable for a wide variety of user specifications including frequency, supply voltage, output format, and temperature stability. Specific configurations are factory programmed at time of shipment, thereby eliminating long lead times associated with custom oscillators. FS[1] 7 NC 1 6 VDD OE 2 5 CLK– GND 3 4 CLK+ 8 FS[0] (LVDS/LVPECL/CML) FS[1] Functional Block Diagram 7 VDD FS[1] Fixed Frequency XO CLK– CLK+ Any-rate 10–1400 MHz DSPLL® Clock Synthesis OE NC 1 6 VDD OE 2 5 NC GND 3 4 CLK 8 FS[0] FS[0] (CMOS) GND Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.4 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 4, 2022 Si5 34 1. Electrical Specifications Table 1. Recommended Operating Conditions Parameter Supply Voltage1 Supply Current Symbol Test Condition Min Typ Max Units VDD 3.3 V option 2.97 3.3 3.63 V 2.5 V option 2.25 2.5 2.75 V 1.8 V option 1.71 1.8 1.89 V Output enabled LVPECL CML LVDS CMOS — — — — 111 99 90 81 121 108 98 88 Tristate mode — 60 75 mA VIH 0.75 x VDD — — V VIL — — 0.5 V –40 — 85 ºC IDD Output Enable (OE) and Frequency Select FS[1:0]2 Operating Temperature Range TA mA Notes: 1. Selectable parameter specified by part number. See Section 3. "Ordering Information" on page 7 for further details. 2. OE and FS[1:0] pins include a 17 k pullup resistor to VDD. Table 2. CLK± Output Frequency Characteristics Parameter Nominal Frequency1,2 Initial Accuracy Symbol Test Condition Min Typ Max Units fO LVPECL/LVDS/CML 10 — 945 MHz CMOS 10 — 160 MHz Measured at +25 °C at time of shipping — ±1.5 — ppm –7 –20 –50 — — — +7 +20 +50 ppm Frequency drift over first year — — ±3 ppm Frequency drift over 20-year life — — ±10 ppm Temp stability = ±7 ppm — — ±20 ppm Temp stability = ±20 ppm — — ±31.5 ppm Temp stability = ±50 ppm — — ±61.5 ppm fi Temperature Stability1,3 Aging fa Total Stability Notes: 1. See Section 3. "Ordering Information" on page 7 for further details. 2. Specified at time of order by part number. Also available in frequencies from 970 to 1134 MHz and 1213 to 1417 MHz. 3. Selectable parameter specified by part number. 4. Time from powerup or tristate mode to fO. 2 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.4 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 4, 2022 Si534 Table 2. CLK± Output Frequency Characteristics (Continued) Parameter Symbol Time4 tOSC Settling Time After FS[1:0] Change tFRQ Powerup Test Condition Min Typ Max Units — — 10 ms — — 20 ms Both FS[1] and FS[0] changing simultaneously Notes: 1. See Section 3. "Ordering Information" on page 7 for further details. 2. Specified at time of order by part number. Also available in frequencies from 970 to 1134 MHz and 1213 to 1417 MHz. 3. Selectable parameter specified by part number. 4. Time from powerup or tristate mode to fO. Table 3. CLK± Output Levels and Symmetry Parameter Symbol Test Condition Min Typ Max Units VO mid-level VDD – 1.42 — VDD – 1.25 V VOD swing (diff) 1.1 — 1.9 VPP VSE swing (single-ended) 0.55 — 0.95 VPP VO mid-level 1.125 1.20 1.275 V VOD swing (diff) 0.5 0.7 0.9 VPP 2.5/3.3 V option mid-level — VDD – 1.30 — V 1.8 V option mid-level — VDD – 0.36 — V 2.5/3.3 V option swing (diff) 1.10 1.50 1.90 VPP 1.8 V option swing (diff) 0.35 0.425 0.50 VPP VOH IOH = 32 mA 0.8 x VDD — VDD V VOL IOL = 32 mA — — 0.4 V tR, tF LVPECL/LVDS/CML — — 350 ps CMOS with CL = 15 pF — 1 — ns 45 — 55 % LVPECL Output Option1 LVDS Output Option2 CML Output Option2 VO VOD CMOS Output Option3 Rise/Fall time (20/80%) Symmetry (duty cycle) SYM LVPECL: (diff) LVDS: CMOS: VDD – 1.3 V 1.25 V (diff) VDD/2 Notes: 1. 50  to VDD – 2.0 V. 2. Rterm = 100  (differential). 3. CL = 15 pF Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.4 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 4, 2022 3 Si5 34 Table 4. CLK± Output Phase Jitter Parameter Symbol Test Condition Min Typ Max Units Phase Jitter (RMS)1 for FOUT > 500 MHz J 12 kHz to 20 MHz (OC-48) — 0.25 0.40 ps 50 kHz to 80 MHz (OC-192) — 0.26 0.37 ps Phase Jitter (RMS)1 for FOUT of 125 to 500 MHz J 12 kHz to 20 MHz (OC-48) — 0.36 0.50 ps — 0.34 0.42 ps Phase Jitter (RMS) for FOUT of 10 to 160 MHz CMOS Output Only J 12 kHz to 20 MHz (OC-48)2 — 0.62 — ps 50 kHz to 20 MHz2 — 0.61 — ps 50 kHz to 80 MHz (OC-192) 2 Notes: 1. Refer to AN256 for further information. 2. Max offset frequencies: 80 MHz for FOUT > 250 MHz, 20 MHz for 50 MHz < FOUT 000100, f0 is 644.53125 MHz (lower frequency) and f1 is 693.48299 (higher frequency), with a 3.3 V supply, LVPECL output, and Output Enable active high polarity. Temperature stability is specified as ±20 ppm. The part is specified for a –40 to +85 C° ambient temperature range operation and is shipped in tape and reel format. Figure 1. Part Number Convention Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.4 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 4, 2022 7 Si5 34 4. Outline Diagram and Suggested Pad Layout Figure 2 illustrates the package details for the Si534. Table 11 lists the values for the dimensions shown in the illustration.   Figure 2. Si534 Outline Diagram Table 11. Package Diagram Dimensions (mm) Dimension A b b1 c c1 D D1 e E E1 H L L1 p R aaa bbb ccc ddd eee Min 1.50 1.30 0.90 0.50 0.30 4.30 6.10 0.55 1.17 1.07 1.80 — — — — — Nom 1.65 1.40 1.00 0.60 — 5.00 BSC 4.40 2.54 BSC 7.00 BSC 6.20 0.65 1.27 1.17 — 0.70 REF — — — — — Max 1.80 1.50 1.10 0.70 0.60 4.50 6.30 0.75 1.37 1.27 2.60 0.15 0.15 0.10 0.10 0.05 Note: 1. All dimensions shown are in millimeters (mm) unless otherwise noted. 2. Dimensioning and Tolerancing per ANSI Y14.5M-1994. 8 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.4 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 4, 2022 Si534 5. Si534 Mark Specification Figure 3 illustrates the mark specification for the Si534. Table 12 lists the line information. Figure 3. Mark Specification Table 12. Si53x Top Mark Description Line Position 1 1–10 “534” 2 1–10 Si530, Si531: Option1 + Option2 + Freq(7) + Temp Si532, Si533, Si534, Si530/Si531 w/ 8-digit resolution: Option1 + Option2 + ConfigNum(6) + Temp 3 Description Trace Code Position 1 Pin 1 orientation mark (dot) Position 2 Product Revision (D) Position 3–6 Tiny Trace Code (4 alphanumeric characters per assembly release instructions) Position 7 Year (least significant year digit), to be assigned by assembly site (ex: 2007 = 7) Position 8–9 Calendar Work Week number (1–53), to be assigned by assembly site Position 10 “+” to indicate Pb-Free and RoHS-compliant Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.4 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 4, 2022 9 Si5 34 6. 8-Pin PCB Land Pattern Figure 4 illustrates the 8-pin PCB land pattern for the Si554. Table 13 lists the values for the dimensions shown in the illustration. Figure 4. Si534 PCB Land Pattern Table 13. PCB Land Pattern Dimensions (mm) Dimension Min Max D2 5.08 REF D3 5.705 REF e 2.54 BSC E2 4.20 REF GD 0.84 — GE 2.00 — VD 8.20 REF VE 7.30 REF X1 1.70 TYP X2 1.545 TYP Y1 2.15 REF Y2 1.3 REF ZD — 6.78 ZE — 6.30 Note: 1. Dimensioning and tolerancing per the ANSI Y14.5M-1994 specification. 2. Land pattern design follows IPC-7351 guidelines. 3. All dimensions shown are at maximum material condition (MMC). 4. Controlling dimension is in millimeters (mm). 10 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com Rev. 1.4 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 4, 2022 Si534 DOCUMENT CHANGE LIST Revision 1.0 to Revision 1.1  Updated Table 1, “Recommended Operating Conditions,” on page 2. Revision 1.3 to Revision 1.4 June, 2018  Changed “Trays” to “Coil Tape” in section 3.“Ordering Information”. Device maintains stable operation over –40 to +85 ºC operating temperature range. Supply current specifications updated for revision D.  Updated Table 2, “CLK± Output Frequency Characteristics,” on page 2. Added specification for ±20 ppm lifetime stability (±7 ppm temperature stability) XO.  Updated Table 3, “CLK± Output Levels and Symmetry,” on page 3. Updated LVDS differential peak-peak swing specifications.  Updated Table 4, “CLK± Output Phase Jitter,” on page 4.  Updated Table 5, “CLK± Output Period Jitter,” on page 4. Revised period jitter specifications. Updated Table 9, “Absolute Maximum Ratings1,” on page 5 to reflect the soldering temperature time at 260 ºC is 20–40 sec per JEDEC J-STD-020C.  Updated 3. "Ordering Information" on page 7.  Changed  ordering instructions to revision D. Added 5. "Si534 Mark Specification" on page 9. Revision 1.1 to Revision 1.2         Updated 2.5 V/3.3 V and 1.8 V CML output level specifications for Table 3 on page 3. Added footnotes clarifying max offset frequency test conditions for Table 4 on page 4. Removed the words "Differential Modes: LVPECL/LVDS/CML" in the footnote referring to AN256 in Table 4 on page 4. Added CMOS phase jitter specs to Table 4 on page 4. Updated ESD HBM sensitivity rating in Table 9 on page 5. Updated Table 7 on page 5 to include the "Moisture Sensitivity Level" and "Contact Pads" rows. Revised Figure 2 on page 8 to reflect current package outline diagram. Updated Figure 3 and Table 12 on page 9 to reflect specific marking information. Previously, Figure 3 was generic. Revision 1.2 to Revision 1.3  Added Table 8, “Thermal Characteristics,” on page 5. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com 11 Rev. 1.4 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • March 4, 2022 ClockBuilder Pro One-click access to Timing tools, documentation, software, source code libraries & more. Available for Windows and iOS (CBGo only). skyworksinc.com/CBPro Portfolio SW/HW Quality Support & Resources skyworksinc.com skyworksinc.com/CBPro skyworksinc.com/quality skyworksinc.com/support Copyright © 2022 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks’ Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NONINFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of Skyworks’ published specifications or parameters. Skyworks, the Skyworks symbol, Sky5®, SkyOne®, SkyBlue™, Skyworks Green™, Clockbuilder®, DSPLL®, ISOmodem®, ProSLIC®, and SiPHY® are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names are for identification purposes only and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. | Nasdaq: SWKS | sales@skyworksinc.com | www.skyworksinc.com USA: 781-376-3000 | Asia: 886-2-2735 0399 | Europe: 33 (0)1 43548540