LBN10013

China Electronics Technology Group Corporation No.26 Research Institute 100MHz IF SAW Filter 29MHz Bandwidth Part Number: LBN10013 www. sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 40 dB Bandwidth Passband Variation Absolute Delay Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz dB usec dB KHz/°C °C °C °C V dBm - Minimum 99.5 29 48 Typical 100 30 29.08 29.27 30.07 1.3 3.26 50 -9.4 YZ-LN 25 Maximum 100.5 35 30.2 1.5 - -40 -45 0 +85 +105 - 1 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN10013 2007-09-28 1.0 Page 1/3 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 100MHz IF SAW Filter 29MHz Bandwidth Part Number: LBN10013 www. sipatsaw.com SIPAT Co., Ltd. Matching Configuration L1=82nH INPUT 50Ω L1 L2 OUTPUT 50Ω L2=47nH Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.5 12.80 0.5 SIPAT LBN10013 07XX Pad Configuration: Input Output 1 5 Ground All Others 4.7 4.5 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBN10013: Part Number 3) 07XX: Date Code 0.45 0.05 2.54 0.2 7.62 0.2 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.2 2.54 0.2 Unit: mm Part Number Rev. Date Ver. LBN10013 2007-09-28 1.0 Page 2/3 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 100MHz IF SAW Filter 29MHz Bandwidth Part Number: LBN10013 www. sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Respond Type Performance -19.7987 -29.7987 -39.7987 -29.2987 -49.7987 Magnitude(dB) -59.7987 -69.7987 -79.7987 -89.7987 -31.2987 -99.7987 -109.7987 -119.7987 50 -31.7987 -29.7987 -30.2987 -30.7987 -28.2987 -28.7987 Passband Respond 60 70 80 90 100 110 Frequency(MHz) 120 130 140 150 75 80 85 90 95 100 105 110 115 120 125 Horizontal: 10MHz/Div Vertical: 10dB/Div Horizontal: 5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±14.5MHz) Type Performance 3400 15 Phase Linearity(f0±14.5MHz) Type Performance 3350 10 3300 X: 85.5 Y: 3262 5 X: 85.5 Y: 1.85 X: 114.5 Y: 3241 X: 100 Y: -0.6085 X: 114.5 Y: 2.993 Group Delay Time(ns) 3200 Degree(deg) 105 110 115 120 3250 X: 100 Y: 3256 0 -5 3150 -10 3100 -15 3050 80 85 90 95 100 Frequency(MHz) -20 80 85 90 95 100 Frequency(MHz) 105 110 115 120 Horizontal: 5MHz/Div Vertical: 50ns/Div Horizontal: 5MHz/Div Vertical: 5deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 5.0 0.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBN10013 2007-09-28 1.0 Page 3/3 Fax: +86-23-62805284 www.sipatsaw.com / sawmkt@sipat.com