LBS100001

China Electronics Technology Group Corporation No.26 Research Institute 1000MHz SAW Filter 2MHz Bandwidth Part Number: LBS100001 www.sipatsaw.com SIPAT Co., Ltd. Features For RF SAW filter Single-ended operation Ceramic Surface Mount Package Small size No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1 dB Bandwidth 3 dB Bandwidth 20 dB Bandwidth Passband Variation Group Delay Variation(f0±1MHz) Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz dB us dB KHz/°C °C V dBm - Minimum 999 2 0.95 - Typical 1000 21.3 2.2 3.67 8 0.3 1 28 1.0 Qz 25 0 Maximum 1001 23 10.5 0.8 1.05 - - 1C 10 SMD7.0*5.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS100001 2011-01-28 1.1 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 1000MHz SAW Filter 2MHz Bandwidth Part Number: LBS100001 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration Source/Load Impedance=50 ohm INPUT 50Ω OUTPUT 50Ω Notes - Component values may change depending on board layout. Package Dimension 7.00±0.15 8 9 7 6 5.00±0.15 5 Pad Configuration: Input: 9 Output: 4 Ground: All Others 10 SIPAT LBS100001 XXYYZZ 1 2 3 4 1.50±0.15 0.80 Marking Configuration: 1) •: Pad Number 1 Index 2) SIPAT: Manufacturer Name 3) LBS100001: Part Number 4) XXYY: Date(Year/month) 0.60 1 10 2 3 1.00 4 2.54 5) ZZ: Identified Code 9 8 7 6 5 1.27 Package: SMD7.0*5.0 Unit: mm SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS100001 2011-01-28 1.1 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 1000MHz SAW Filter 2MHz Bandwidth Part Number: LBS100001 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -11.3401 -19.8401 Passband Response Type Performance -21.3401 -20.3401 -31.3401 -20.8401 -41.3401 -21.3401 -51.3401 A m plitude ripple(dB ) 980 985 990 995 1000 Frequency(MHz) 1005 1010 1015 1020 M agnitude(dB ) -61.3401 -21.8401 -71.3401 -22.3401 -81.3401 -22.8401 -91.3401 -23.3401 -101.3401 -111.3401 996 997 998 999 1000 Frequency(MHz) 1001 1002 1003 Horizontal: 5MHz/Div Vertical: 10dB/Div Horizontal: 1MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±1MHz) Type Performance 1500 30 Phase Linearity(f0±1MHz) Type Performance 1400 20 1300 1200 10 G roup Delay T im e(ns ) 1100 0 1000 Degree(deg) -10 900 -20 -30 600 992 994 996 998 1000 Frequency(MHz) 1002 1004 1006 1008 1010 -40 990 800 700 500 990 992 994 996 998 1000 Frequency(MHz) 1002 1004 1006 1008 1010 Horizontal: 2MHz/Div Vertical: 100ns/Div Horizontal: 2MHz/Div Vertical: 10deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 +j0.5 Smith Chart S22 +j1.0 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS100001 2011-01-28 1.1 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com