LBS16401_10

China Electronics Technology Group Corporation No.26 Research Institute 163.5MHz SAW Filter 1MHz Bandwidth Part Number: LBS16401 www.sipatsaw.com SIPAT Co., Ltd. Features For IF SAW filter High attenuation Single-ended operation Dual In-line Package No matching required for operation at 50Ω RoHS compliant (2002/95/EC), Pb-free Specifications Parameter Center Frequency Insertion Loss 1.5 dB Bandwidth 3 dB Bandwidth 35 dB Bandwidth 40 dB Bandwidth 45 dB Bandwidth 50 dB Bandwidth 53 dB Bandwidth Group Delay Variation(f0±0.5MHz) Passband Variation Absolute Delay Ultimate Rejection(f0±15MHz) Material Temperature coefficient Substrate Material Ambient Temperature DC Voltage Input Power ESD Class Package Size Notes: 1. 2. 3. 4. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; This is the optimum impedance in order to achieve the performance show. Unit MHz dB MHz MHz MHz MHz MHz MHz MHz nsec dB usec dB KHz/°C °C V dBm - Minimum 163.35 1.1 53 Typical 163.5 24.2 1.06 1.18 1.85 1.9 1.93 1.97 2 140 0.5 3.64 62 0.16 Qz 25 0 Maximum 163.65 30 2 2.4 3.2 11.2 1.5 - - 1C 10 DIP3512 (35.0x12.8x4.7mm3) SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS16401 2010-07-21 1.0 Page 1/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 163.5MHz SAW Filter 1MHz Bandwidth Part Number: LBS16401 www.sipatsaw.com SIPAT Co., Ltd. Matching Configuration INPUT 50Ω OUTPUT 50Ω Source/Load Impedance=50 ohm Notes - Component values may change depending on board layout. Package Dimension 35.00 0.50 Pad Configuration: 12.80 0.50 SIPAT LBS16401 XXYYZZ Input Output 1 5 Ground All Others 4.70 0.50 4.50 0.50 Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBS16401: Part Number 3) XXYY: Date(Year/month) 4) ZZ: Identified Code 0.45 0.05 2.54 0.20 7.62 0.50 3 6 Package: DIP3512 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 2 1 4 5 25.40 0.50 2.54 0.20 Unit: mm Part Number Rev. Date Ver. LBS16401 2010-07-21 1.0 Page 2/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com China Electronics Technology Group Corporation No.26 Research Institute 163.5MHz SAW Filter 1MHz Bandwidth Part Number: LBS16401 www.sipatsaw.com SIPAT Co., Ltd. Typical Performance Frequency Response Type Performance -14.1537 -24.1537 -34.1537 -23.6537 -22.6537 Passband Response Type Performance -23.1537 -44.1537 Magnitude(dB) Amplitude ripple(dB) -54.1537 -64.1537 -74.1537 -84.1537 -24.1537 -24.6537 -25.1537 -25.6537 -94.1537 -104.1537 -114.1537 159 160 161 162 163 164 165 Frequency(MHz) 166 167 168 -26.1537 -26.6537 162 162.5 163 163.5 Frequency(MHz) 164 164.5 165 Horizontal: 1MHz/Div Vertical: 10dB/Div Horizontal: 0.5MHz/Div Vertical: 0.5dB/Div Group Delay Variation(f0±0.5MHz) Type Performance 4600 8 Phase Linearity(f0±0.5MHz) Type Performance 4400 6 4200 4 4000 2 Group Delay Time(ns) 3800 X: 163 Y: 3609 X: 163.5 Y: 3634 X: 163.5 Y: 1.287 Degree(deg) 3600 X: 164 Y: 3586 0 X: 163 Y: -1.16 X: 164 Y: -0.7557 3400 -2 3200 -4 3000 -6 2800 -8 2600 162.5 163 163.5 Frequency(MHz) 164 164.5 -10 162.5 163 163.5 Frequency(MHz) 164 164.5 Horizontal: 0.5MHz/Div Vertical: 200ns/Div Horizontal: 0.5MHz/Div Vertical: 2deg/Div Smith Chart S11 +j1.0 +j0.5 +j2.0 Smith Chart S22 +j1.0 +j0.5 +j2.0 +j0.2 +j5.0 +j0.2 +j5.0 0.2 0.5 1.0 2.0 5.0 0.2 0.5 1.0 2.0 0.0 ∞ 0.0 5.0 ∞ -j0.2 -j5.0 -j0.2 -j5.0 -j0.5 -j1.0 -j2.0 -j0.5 -j1.0 -j2.0 SIPAT Co., Ltd. ( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818 Part Number Rev. Date Ver. LBS16401 2010-07-21 1.0 Page 3/3 Fax: +86-23-62808382 www.sipatsaw.com / sales@sipat.com