China Electronics Technology Group Corporation No.26 Research Institute
115MHz SAW Filter 10MHz Bandwidth
Part Number: LBT11554
www. sipatsaw.com
SIPAT Co., Ltd.
Features
For IF SAW filter High attenuation Single-ended operation Dual In-line Package RoHS compliant (2002/95/EC), Pb-free
Specifications
Parameter
Center Frequency Insertion Loss 3 dB Bandwidth 40dB Bandwidth 50 dB Bandwidth Passband Variation Absolute Delay Group Delay Variation(f0±4.5MHz) Ultimate Rejection Material Temperature coefficient Substrate Material Ambient Temperature Operating Temperature Range Storage Temperature Range DC Voltage Input Power ESD Class Package Size Notes: 1. 2. All specifications are based on the test circuit shown; In production, all specifications are measured by Agilent Network analyzer and full 2 port calibration at room temperature; 3. Electrical margin has been built into the design to account for the variations due to temperature drift and manufacturing tolerances; 4. This is the optimum impedance in order to achieve the performance show.
Unit
MHz dB MHz MHz MHz dB usec nsec dB KHz/°C °C °C °C V dBm -
Minimum
114.92 22 9.9 50
Typical
115 24 9.98 11.27 11.38 0.7 3.3 80 60 -2.07 112LT 25
Maximum
115.08 26 10.3 11.35 12 1 3.5 300 -
-40 -45
0
+85 +105
-
1A
10
DIP2212 (22.2x12.8x4.7mm3)
SIPAT Co., Ltd.
( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818
Part Number Rev. Date Ver.
LBT11554 2008-03-04 1.0 Page 1/3
Fax: +86-23-62808382
www.sipatsaw.com / sawmkt@sipat.com
China Electronics Technology Group Corporation No.26 Research Institute
115MHz SAW Filter 10MHz Bandwidth
Part Number: LBT11554
www. sipatsaw.com
SIPAT Co., Ltd.
Matching Configuration
L1 L2
L1=L2=82nH
OUTPUT 50Ω C2
Notes - Component values may change depending on board layout.
INPUT 50Ω C1
C1=C2=36pF Source/Load Impedance=50 ohm
Package Dimension
22.20 0.5 12.80 0.5
SIPAT LBT11554 08XX
Pad Configuration: Input Output 1 5
Ground All Others
4.7 4.5
Marking Configuration: 1) SIPAT: Manufacturer Name 2) LBT11554: Part Number 3) 08XX: Date Code
0.45 0.05 2.54 0.2
7.62 0.2
3
Package: DIP2212
SIPAT Co., Ltd.
( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818
2 1
4 5 6
12.70 0.2
2.54 0.2
Unit: mm
Part Number Rev. Date Ver.
LBT11554 2008-03-04 1.0 Page 2/3
Fax: +86-23-62808382
www.sipatsaw.com / sawmkt@sipat.com
China Electronics Technology Group Corporation No.26 Research Institute
115MHz SAW Filter 10MHz Bandwidth
Part Number: LBT11554
www. sipatsaw.com
SIPAT Co., Ltd.
Typical Performance
Frequency Respond
Type Performance -13.7085 -23.7085 -33.7085
-23.2085 -22.2085
Passband Respond
-22.7085
-43.7085 Magnitude(dB) -53.7085 -63.7085 -73.7085 -83.7085
-25.2085 -23.7085
-24.2085
-24.7085
-93.7085 -103.7085 -113.7085 95
-25.7085
100
105
110 115 120 Frequency(MHz)
125
130
135
105
110
115
120
125
Horizontal: 5MHz/Div
Vertical: 10dB/Div
Horizontal: 5MHz/Div
Vertical: 0.5dB/Div
Group Delay Variation(f0±4.5MHz)
Type Performance 3500 15
Phase Linearity(f0±4.5MHz)
Type Performance
3450 10 3400 5 3350 Group Delay Time(ns)
X: 110.5 Y: 3310 X: 119.5 Y: 3294 X: 115 Y: 3301 X: 119.5 Y: 0.9193
Degree(deg)
3300
0
X: 110.5 Y: -2.26 X: 115 Y: -1.064
3250
-5
3200 -10 3150 -15 3100
3050
108
110
112
114 116 Frequency(MHz)
118
120
122
-20
108
110
112
114 116 Frequency(MHz)
118
120
122
Horizontal: 2MHz/Div
Vertical: 50ns/Div
Horizontal: 2MHz/Div
Vertical: 5deg/Div
Smith Chart S11
+j1.0 +j0.5 +j2.0
Smith Chart S22
+j1.0 +j0.5 +j2.0
+j0.2
+j5.0
+j0.2
+j5.0
0.2
0.5
1.0
2.0
5.0
0.2
0.5
1.0
2.0
0.0
∞
5.0
0.0
∞
-j0.2
-j5.0
-j0.2
-j5.0
-j0.5 -j1.0
-j2.0
-j0.5 -j1.0
-j2.0
SIPAT Co., Ltd.
( CETC No.26 Research Institute ) #14 Nanping Huayuan Road, Chongqing, China, 400060 Tel: +86-23-62808818
Part Number Rev. Date Ver.
LBT11554 2008-03-04 1.0 Page 3/3
Fax: +86-23-62808382
www.sipatsaw.com / sawmkt@sipat.com
很抱歉,暂时无法提供与“LBT11554”相匹配的价格&库存,您可以联系我们找货
免费人工找货