SP202E, SP232E, SP233E
Data Sheet
High Performance RS-232 Line Drivers / Receivers
General Description
Features
The SP202E, SP232E and SP233E devices are a family of
line driver and receiver pairs that meets the specifications of
RS-232 and V.28 serial protocols. The devices are pin-to-pin
compatible with MaxLinear’s SP232A and SP233A devices
as well as popular industry standard pinouts. The ESD
tolerance has been improved on these devices to over ±15kV
for Human Body Model. This series offers a 120kbps data
rate under load, small ceramic type 0.1µF charge pump
capacitors and overall ruggedness for commercial
applications. Features include MaxLinear’s BiCMOS design
which allows low power operation without sacrificing
performance. The series is available in lead free packages
and includes commercial and industrial temperature ranges.
■
■
■
■
■
■
■
■
Operates from a single +5V power supply
Meets all RS-232D and ITU V.28 specifications
Operates with 0.1µF to 10µF ceramic capacitors
No external capacitors required (SP233E)
High data rate - 120kbps under load
Low power CMOS operation
Lead-free packaging
Improved ESD specifications: ±15kV Human Body Model
Ordering Information - page 13
Selection Table
Table 1: Selection Table
Number of RS-232
Drivers
Receivers
Number of external 0.1uF
capacitors
SP202E
2
2
4
SP232E
2
2
4
SP233E
2
2
0
Model
• www.maxlinear.com• Rev 1.0.2
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers Data Sheet
Revision History
Revision History
Document No.
Release Date
Change Description
A
7/19/04
Original Sipex Data Sheet.
1.0.0
11/6/08
Generate new Data Sheet using Exar format and change revision to 1.0.0. Remove IEC Air
and Contact ESD ratings. Update ordering information to remove EOL part numbers.Update
charge pump description to show regulated charge pump design.
1.0.1
6/3/11
Remove SP310ECP-L and SP310EEP-L per PDN 110510-01
1.0.2
3/28/19
Update to MaxLinear format. Update ordering information. Moved ESD ratings to under
Absolute Maximum Ratings. Removed obsolete SP310E and SP312E.
3/28/19
Rev 1.0.2
ii
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers Data Sheet
Table of Contents
Table of Contents
General Description............................................................................................................................................. i
Features............................................................................................................................................................... i
Selection Table..................................................................................................................................................... i
Specifications ..................................................................................................................................................... 1
Absolute Maximum Ratings...........................................................................................................................................1
ESD Ratings ..................................................................................................................................................................1
Electrical Characteristics ...............................................................................................................................................2
Performance Curves........................................................................................................................................... 3
Pin Information ................................................................................................................................................... 4
Pin Configurations .........................................................................................................................................................4
Description .......................................................................................................................................................... 5
Theory Of Operation..................................................................................................................................................... 5
Drivers .......................................................................................................................................................................... 5
Receivers ..................................................................................................................................................................... 5
Charge pump................................................................................................................................................................ 5
Phase 1 ................................................................................................................................................................5
Phase 2 ................................................................................................................................................................5
Phase 3 ................................................................................................................................................................6
Phase 4 ................................................................................................................................................................6
Pin Strapping for the SP233E .......................................................................................................................................7
ESD Tolerance ............................................................................................................................................................. 7
Typical Performance Characteristics................................................................................................................ 8
Mechanical Dimensions ................................................................................................................................... 10
NSOIC16 ..................................................................................................................................................................... 10
Mechanical Dimensions ................................................................................................................................... 11
WSOIC16 ....................................................................................................................................................................11
Mechanical Dimensions ................................................................................................................................... 12
WSOIC20 ....................................................................................................................................................................12
Ordering Information........................................................................................................................................ 13
3/28/19
Rev 1.0.2
iii
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers Data Sheet
List of Figures
List of Figures
Figure 1: V- Voltage.............................................................................................................................................. 3
Figure 2: V+ Voltage............................................................................................................................................. 3
Figure 3: ICC vs. Temperature .............................................................................................................................. 3
Figure 4: VOH vs. VCC........................................................................................................................................... 3
Figure 5: SP202E Pin Configuration..................................................................................................................... 4
Figure 6: SP232E Pin Configuration..................................................................................................................... 4
Figure 7: SP233E Pin Configuration..................................................................................................................... 4
Figure 8: Charge Pump Phases ........................................................................................................................... 6
Figure 9: ESD Test Circuit for Human Body Model .............................................................................................. 7
Figure 10: SP232E Charge Pump Waveforms, No Load, (1 = C1+, 2 = C2+, 3 = V+, 4 = V-) ............................. 8
Figure 11: SP232E Charge Pump Waveforms, When Fully Loaded with 3kΩ
(1 = C1+, 2 = C2+, 3 = V+, 4 = V-)........................................................................................................ 8
Figure 12: Loopback Results at 60kHz and 2500pF load, (1 = TXIN, 2 = TXOUT/RXIN, 3 = RXOUT) .................... 8
Figure 13: Charge Pump Outputs, at Start Up (1 = VCC, 2 = V+, 3 = V-) ............................................................. 8
Figure 14: SP202E and SP232E Typical Application Circuit ................................................................................ 9
Figure 15: SP233E Typical Application Circuit ..................................................................................................... 9
Figure 16: Mechanical Dimension, NSOIC16 ..................................................................................................... 10
Figure 17: Mechanical Dimensions, WSOIC16 .................................................................................................. 11
Figure 18: Mechanical Dimensions, WSOIC20 .................................................................................................. 12
3/28/19
Rev 1.0.2
iv
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers Data Sheet
List of Tables
List of Tables
Table 1: Selection Table ........................................................................................................................................ i
Table 2: Absolute Maximum Ratings .................................................................................................................... 1
Table 3: ESD Ratings ........................................................................................................................................... 1
Table 4: Electrical Characteristics ........................................................................................................................ 2
Table 5: SP233E Pin Strapping ............................................................................................................................ 7
Table 6: Ordering Information............................................................................................................................. 13
3/28/19
Rev 1.0.2
v
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers Data Sheet
Specifications
Specifications
Absolute Maximum Ratings
Important: This is a stress rating only and functional operation of the device at these ratings or any other above those
indicated in the operation section of the specification is not implied. Exposure to absolute maximum ratings conditions for
extended periods of time may affect reliability.
Table 2: Absolute Maximum Ratings
Parameter
Minimum
Supply voltage (VCC)
V+
VCC - 0.3
V-
-11.0
Maximum
Units
6.0
V
11.0
V
V
Input Voltages
TIN
-0.3
VCC +0.3
V
RIN
-15
15
V
TOUT
V+, 0.3V
V-, -0.3V
V
ROUT
-0.3
VCC + 0.3
V
Output Voltages
Short Circuit Duration
Continuous
TOUT
Package Power Dissipation
Small outline (derate 7mW/°C above 70°C)
Storage temperature
-65
375
mW
150
°C
ESD Ratings
Table 3: ESD Ratings
Parameter
Limit
Units
HBM (Human Body Model)
±15
kV
3/28/19
Rev 1.0.2
1
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers Data Sheet
Electrical Characteristics
Electrical Characteristics
VCC = 5V ± 10%, 0.1µF charge pump capacitors, TMIN to TMAX, unless otherwise noted. Typical values are VCC = 5V and
TA = 25°C
Table 4: Electrical Characteristics
Parameter
Test Condition
Minimum
Typical
Maximum
Units
0.8
V
200
µA
0.4
V
TTL Input
Logic threshold LOW
TIN, EN, SD, ON/OFF
Logic threshold HIGH
TIN, EN, SD, ON/OFF
Logic pull-up current
TIN = 0V
2.0
V
15
TTL Output
Output voltage LOW
IOUT = 3.2mA, VCC = 5V
Output voltage HIGH
IOUT = -1.0mA
3.5
Output voltage swing
All transmitter outputs loaded with
3kΩ to GND
±5.0
Output resistance
VCC = 0V, VOUT = ±2V
300
Output short circuit current
Infinite duration
Maximum data rate
CL = 2500pF, RL = 3kΩ
120
Voltage threshold LOW
VCC = 5V, TA = 25°C
0.8
Voltage threshold HIGH
VCC = 5V, TA = 25°C
Hysteresis
VCC = 5V, TA = 25°C
Resistance
TA = 25°C, -15V ≤ VIN ≤ 15V
V
RS-232 Output
±6.0
V
Ω
±18
mA
240
kbps
RS-232 Input
Voltage range
-15
15
1.2
V
V
1.7
2.8
V
0.2
0.5
1.0
V
3
5
7
kΩ
Dynamic Characteristics
Driver propagation delay
TTL to RS-232; CL = 50pF
1.5
3.0
µs
Receiver propagation delay
RS-232 to TTL
0.1
1.0
µs
Instantaneous slew rate
CL = 10pF, RL = 3-7kΩ, TA = 25°C
30
V/µs
Transition region slew rate
CL = 2500pF, RL = 3kΩ, measured
from 3V to -3V or -3V to 3V
10
VCC power supply current
No load, VCC = 5V, TA = 25°C
3
VCC power supply current, loaded
All transmitters RL = 3kΩ, TA = 25°C
15
V/µs
Power Requirements
3/28/19
Rev 1.0.2
5
mA
mA
2
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers
Performance Curves
Performance Curves
12
-11
-10
10
VCC = 6V
VCC = 5V
8
VCC = 6V
-8
V+ (Volts)
V– Voltage (Volts)
-9
VCC = 5V
-7
-6
VCC = 4V
6
4
VCC = 4V
-5
2
-4
-3
0
2
4
6
8
10
12
0
14
0
Load Current (mA)
5
10
15
20
25
30
35
40
Load Current (mA)
Figure 1: V- Voltage
Figure 2: V+ Voltage
9.0
30
8.5
25
8.0
VCC = 6V
7.5
VOH (Volts)
ICC (mA)
20
15
VCC = 5V
7.0
Load current = 0mA
TA = 25 C
6.5
10
6.0
VCC = 4V
5
5.5
VCC = 3V
0
-55
-40
0
25
70
85
5.0
4.5
125
5.0
5.25
5.5
Figure 4: VOH vs. VCC
Figure 3: ICC vs. Temperature
3/28/19
4.75
VCC (Volts)
Temperature ( C)
Rev 1.0.2
3
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers Data Sheet
Pin Information
Pin Information
Pin Configurations
Figure 5: SP202E Pin Configuration
Figure 6: SP232E Pin Configuration
Figure 7: SP233E Pin Configuration
3/28/19
Rev 1.0.2
4
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers
Description
Description
The SP202E, SP232E and SP233E devices are a family of
line driver and receiver pairs that meet the EIA / TIA-232
and V-28 serial communications protocols. The ESD
tolerance has been improved on these devices to over
±15kV for Human Body Model. These devices are pin-topin compatible with MaxLinear’s SP232A and SP233A as
well as popular industry standards.This family of parts offer
a 120kbps data rate, 10V/us slew rate and an on-board
charge pump that operates from a single 5V supply using
0.1µF ceramic capacitors.
The SP202E, SP232E and SP233E devices have internal
charge pump voltage converters which allow them to
operate from a single +5V supply. The charge pumps will
operate with polarized or non-polarized capacitors ranging
from 0.1 to 10µF and will generate the ±6V needed to
generate the RS-232 output levels.
The SP233E design offers internal charge pump
capacitors.
In actual system applications, it is quite possible for signals
to be applied to receiver inputs before power is applied to
the receiver circuitry. This occurs, for example, when a PC
user attempts to print, only to realize that the printer wasn't
turned on. In this case an RS-232 signal from the PC will
appear on the receiver input at the printer. When the printer
power is turned on, the receiver will operate normally. All of
these devices are fully protected.
Charge pump
Theory Of Operation
The SP202E, SP232E and SP233E devices are made up
of three basic circuit blocks: 1. Drivers, 2. Receivers, and
3. charge pump. Each block is described below.
Drivers
The drivers are inverting level transmitters that convert TTL
or CMOS logic levels to EIA / TIA-232 levels with an
inverted sense relative to the input logic levels. The typical
driver output voltage swing is ±6V. Even under worst case
loading conditions of 3kΩ and 2500pF, the driver output is
guaranteed to be ±5.0V minimum, thus satisfying the
RS-232 specification. The driver outputs are protected
against infinite short-circuits to ground without degradation
in reliability.
The slew rate of the driver output is internally limited to
30V/µs in order to meet the EIA standards (EIA-232F).
Additionally, the driver outputs LOW to HIGH transition
meets the monotonic output requirements of the standard.
Receivers
The receivers convert EIA / TIA-232 signal levels to
inverted TTL or CMOS logic output levels. Since the input
is usually from a transmission line, where long cable length
3/28/19
and system interference can degrade the signal, the inputs
have a typical hysteresis margin of 500mV. This ensures
that the receiver is virtually immune to noisy transmission
lines. The input thresholds are 0.8V minimum and 2.8V
maximum, again well within the ±3V RS-232 requirements.
Should an input be left unconnected, an internal 5kΩ pulldown resistor to ground will commit the output of the
receiver to a HIGH state.
The charge pump is an Exar patented design and uses a
unique approach compared to older less efficient designs.
The charge pump requires 4 external capacitors and uses
a four phase voltage shifting technique. The internal power
supply consists of a dual charge pump that provides a
driver output voltage swing of ±6V. The internal oscillator
controls the four phases of the voltage shifting. A
description of each phase follows:
Phase 1
VSS charge store and double: The positive terminals of
capacitors C1 and C2 are charged from VCC with their
negative terminals initially connected to ground. C1+ is
then connected to ground and the stored charge from C1is superimposed onto C2-. Since C2+ is still connected to
VCC the voltage potential across C2 is now 2 x VCC.
Phase 2
VSS transfer and invert: Phase two connects the negative
terminal of C2 to the VSS storage capacitor and the positive
terminal of C2 to ground. This transfers the doubled and
inverted (V-) voltage onto C4. Meanwhile, capacitor C1 is
charged from VCC to prepare it for its next phase.
Rev 1.0.2
5
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers
Phase 3
VDD charge store and double: Phase three is identical to
the first phase. The positive terminals of C1 and C2 are
charged from VCC with their negative terminals initially
connected to ground. C1+ is then connected to ground and
the stored charge from C1- is superimposed onto C2-.
Since C2+ is still connected to VCC the voltage potential
across capacitor C2 is now 2 x VCC.
Phase 4
VDD transfer: The fourth phase connects the negative
terminal of C2 to ground and the positive terminal of C2 to
Description
the VDD storage capacitor. This transfers the doubled (V+)
voltage onto C3. Meanwhile, capacitor C1 is charged from
VCC to prepare it for its next phase.
The clock rate for the charge pump typically operates at
greater than 15kHz allowing the pump to run efficiently with
small 0.1µF capacitors. Efficient operation depends on
rapid charging and discharging of C1 and C2, therefore
capacitors should be mounted as close as possible to the
IC and have low ESR (equivalent series resistance).
Inexpensive surface mount, ceramic capacitors are ideal
for use on the charge pump. If polarized capacitors are
used, the positive and negative terminals should be
connected as shown in the typical operating circuit. A
diagram of the individual phases are shown in Figure 8.
+
V
CC
-
Phase 2 – Vss transfer from C2 to C4.
Meanwhile C1 is charged to Vcc
+
+
V
CC
-
C
Phases 1 and 3: Store/Double.
Double charge from C1 onto C2.
C2 is now charged to -2xVcc
+
1
C
e-
+
2
V+
e-
e-
C
3
+
C
4
Vss
+
C
+
1
C
+
2
ee-
V+
C
V-
+
Patented 5,306,954
3
C
+
V
CC
-
4
Phase 4 VDD transfer from C2 to C3.
Meanwhile C1 is charged to Vcc
V
e+
C
+
1
e-
C
DD
+
e+
+
V+
C
3
2
V-
+
C
4
Figure 8: Charge Pump Phases
3/28/19
Rev 1.0.2
6
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers
Pin Strapping for the SP233E
Pin Strapping for the SP233E
To operate properly, the following pairs of pins must be
externally wired together as noted in Table 5:
Table 5: SP233E Pin Strapping
Pins Wired Together
SOICW
Two V- pins
10 & 17
Two C2+ pins
12 & 15
Two C- pins
11 & 16
Connect pins 6 and 9 to GND
ESD Tolerance
The SP202E, SP232E and SP233E devices incorporate
ruggedized ESD cells on all driver outputs and receiver
input pins. The ESD structure is improved over our
previous family for more rugged applications and
environments sensitive to electro-static discharges and
associated transients. The improved ESD tolerance is at
least ±15kV Human Body Model without damage nor latchup.
The Human Body Model has been the generally accepted
ESD testing method for semiconductors. This method is
also specified in MIL-STD-883, Method 3015.7 for ESD
testing.
The premise of this ESD test is to simulate the human
body's potential to store electro-static energy and
discharge it to an integrated circuit. The simulation is
performed by using a test model as shown in Figure 9. This
method will test the IC's capability to withstand an ESD
transient during normal handling such as in manufacturing
areas where the IC's tend to be handled frequently.
RS
RC
SW2
SW1
DC Power
Source
CS
Device
Under
Test
Figure 9: ESD Test Circuit for Human Body Model
3/28/19
Rev 1.0.2
7
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers
Typical Performance Characteristics
Typical Performance Characteristics
Figure 10: SP232E Charge Pump Waveforms
No Load
(1 = C1+, 2 = C2+, 3 = V+, 4 = V-)
Figure 11: SP232E Charge Pump Waveforms
When Fully Loaded with 3kΩ
(1 = C1+, 2 = C2+, 3 = V+, 4 = V-)
Figure 12: Loopback Results
at 60kHz and 2500pF load
(1 = TXIN, 2 = TXOUT/RXIN, 3 = RXOUT)
Figure 13: Charge Pump Outputs
at Start Up
(1 = VCC, 2 = V+, 3 = V-)
3/28/19
Rev 1.0.2
8
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers
Figure 14: SP202E and SP232E
Typical Application Circuit
3/28/19
Typical Performance Characteristics
Figure 15: SP233E Typical Application Circuit
Rev 1.0.2
9
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers Data Sheet
Mechanical Dimensions
Mechanical Dimensions
NSOIC16
Top View
Front View
Side View
Drawing No:
POD-00000114
Revision:
A
Figure 16: Mechanical Dimension, NSOIC16
3/28/19
Rev 1.0.2
10
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers Data Sheet
Mechanical Dimensions
Mechanical Dimensions
WSOIC16
Top View
Side View
Front View
Drawing No: POD-00000115
Revision:
B
Figure 17: Mechanical Dimensions, WSOIC16
3/28/19
Rev 1.0.2
11
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers Data Sheet
Mechanical Dimensions
Mechanical Dimensions
WSOIC20
SIDE VIEW 1
TOP VIEW
SIDE VIEW 2
©
TERMINAL DETAILS
Drawing No.: POD-000000 146
Revision: A
Figure 18: Mechanical Dimensions, WSOIC20
3/28/19
Rev 1.0.2
12
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers Data Sheet
Ordering Information
Ordering Information
Table 6: Ordering Information
Ordering Part Number
Operating Temperature Range
Lead-Free
SP202ECN-L
SP202ECN-L/TR
SP202ECT-L
NSOIC16
0°C to 70°C
WSOIC16
SP202ECT-L/TR
SP202EEN-L
SP202EEN-L/TR
NSOIC16
-40°C to 85°C
SP202EET-L/TR
Yes(2)
SP232ECN-L
SP232ECN-L/TR
0°C to 70°C
WSOIC16
SP232EEN-L
SP232EET-L/TR
WSOIC16
NSOIC16
SP232ECT-L/TR
SP232EEN-L/TR
Package
NSOIC16
-40°C to 85°C
SP233EET-L
Packaging Method
Tube
Reel
Tube
Reel
Tube
Reel
Reel
Tube
Reel
Reel
Tube
Reel
WSOIC16
Reel
WSOIC20
Tube
1. Refer to www.maxlinear.com/SP202E, www.maxlinear.com/SP232E, and www.maxlinear.com/SP233E for most up-to-date Ordering Information.
2. Visit www.maxlinear.com for additional information on Environmental Rating.
3/28/19
Rev 1.0.2
13
SP202E, SP232E, SP233E High Performance RS-232 Line Drivers / Receivers Data Sheet
Disclaimer
MaxLinear, Inc.
5966 La Place Court, Suite 100
Carlsbad, CA 92008
760.692.0711 p.
760.444.8598 f.
www.maxlinear.com
The content of this document is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by
MaxLinear, Inc. MaxLinear, Inc. assumes no responsibility or liability for any errors or inaccuracies that may appear in the informational content contained in this
guide. Complying with all applicable copyright laws is the responsibility of the user. Without limiting the rights under copyright, no part of this document may be
reproduced into, stored in, or introduced into a retrieval system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or
otherwise), or for any purpose, without the express written permission of MaxLinear, Inc.
Maxlinear, Inc. does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be
expected to cause failure of the life support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications unless
MaxLinear, Inc. receives, in writing, assurances to its satisfaction that: (a) the risk of injury or damage has been minimized; (b) the user assumes all such risks; (c)
potential liability of MaxLinear, Inc. is adequately protected under the circumstances.
MaxLinear, Inc. may have patents, patent applications, trademarks, copyrights, or other intellectual property rights covering subject matter in this document. Except
as expressly provided in any written license agreement from MaxLinear, Inc., the furnishing of this document does not give you any license to these patents,
trademarks, copyrights, or other intellectual property.
MaxLinear, the MaxLinear logo, and any MaxLinear trademarks, MxL, Full-Spectrum Capture, FSC, G.now, AirPHY and the MaxLinear logo are all on the products
sold, are all trademarks of MaxLinear, Inc. or one of MaxLinear’s subsidiaries in the U.S.A. and other countries. All rights reserved. Other company trademarks and
product names appearing herein are the property of their respective owners.
© 2004 - 2019 MaxLinear, Inc. All rights reserved.
工商网监
湘ICP备2023018690号
