PLL250-1960

PLL Product Specification Model: PLL250-1960(Y) Rev: P4 AppNote: Date: 9/1/2006 113 Option 107000 SIRENZA Customer: MICRODEVICES, INC. Operating Temperature Range: ( -10 ° to 85 ° C) RoHS Compliant To order models as RoHS Compliant add "Y" suffix to base model number. Parameter Frequency Range Step Size Settling Time - to within 5 deg. Output Power: RF Switch ON RF Switch OFF Output Phase Noise: 1 kHz 100 kHz 200 kHz 400 kHz 1800 kHz 6000 kHz Power Supply: VCC 1: VCO, PLL CP VCC 2: Amp VCC 3: PLL IC,Switch Supply Current: VCC 1 VCC 2 VCC 3 Spurious Product: 200 kHz 400 kHz 1800 kHz non-harmonic Reference Feedthrough Harmonic Suppression: 2nd Harmonic 3rd Harmonic Ref Osc Signal: Frequency Min 1930 Typ 200 0.4 Max 1990 0.45 Units MHz kHz mSec X X X Remarks -8 -5 -50 -2 -48 dBm dBm X X -82 -118 -126 -135 -146 -155 -79 -110 -120 -129 -143 -152 dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz X 5.75 4.75 3.15 6 5 3.3 6.25 5.25 3.45 Volts Volts Volts X X X 14 48 10 40 80 15 mA mA mA X -82 -98 -115 -100 -73 -85 -100 -100 -95 dBc dBc dBc dBc dBc X -31 -35 -25 -30 dBc dBc X X 52 MHz Performance tests and ratings for Sirenza Microdevices' products were performed internally by Sirenza and measured using specific computer systems and/or components and reflect the approximate performance of the the products as measured by those tests. Any difference in circuit implementation, test software, or test equipment may affect actual performance. The information provided herein is believed to be reliable at press time and Sirenza Microdevices assumes no responsibility for the use of this information. All such use shall be entirely at the user's own risk. Prices and specifications for Sirenza Microdevices' products are subject to change without notice. Buyers should consult Sirenza Microdevices' standard terms and conditions of sale for Sirenza's limited warranty with regard to its products. These products may be patented or include patented technology. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any product for use in life-support devices and/or systems. Page 1 of 2 Model: Rev: PLL250-1960 P4 9/1/2006 Parameter Amplitude Input Impedance Output Impedance Output VSWR Package Information Package Type: Min 0.75 Typ 1 100 50 1.7:1 Max 1.25 Units Vp-p k X Remarks PLL250 (1 x 1 x 0.252 inches ) Drawing Number: 61070 Comments X Indicates parameter to be tested 100% in production Switching Phase Error: By Design: < 50 us, 2 deg. typical - 5 deg. max.; > 50 us, 1 deg. max Max Phase Noise Peaking = 5 dBc/Hz, By Design Pin 19 decoupled with RCR Low-Pass filter All Power Supplies decoupled with LCL-Low-Pass filter All programming lines decoupled with RCR Low-Pass fiter Performance tests and ratings for Sirenza Microdevices' products were performed internally by Sirenza and measured using specific computer systems and/or components and reflect the approximate performance of the the products as measured by those tests. Any difference in circuit implementation, test software, or test equipment may affect actual performance. The information provided herein is believed to be reliable at press time and Sirenza Microdevices assumes no responsibility for the use of this information. All such use shall be entirely at the user's own risk. Prices and specifications for Sirenza Microdevices' products are subject to change without notice. Buyers should consult Sirenza Microdevices' standard terms and conditions of sale for Sirenza's limited warranty with regard to its products. These products may be patented or include patented technology. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any product for use in life-support devices and/or systems. Page 2 of 2 Sirenza Microdevices, Inc. 303 S. Technology Ct. Broomfield, CO 80021 tel 303.327.3030 fax 303.410.7988