DATA SHEET
SKY65373-11: 1710 to 1785 MHz High Linearity, Active Bias
Low-Noise Variable Gain Amplifier
Applications
Bypass Control
LTE, WCDMA, GSM wireless infrastructure
Low noise, high linearity systems
Macro base stations
Small cells
VGC
RF_OUT
RFIN
Features
VCC1
Fully integrated low-noise front end
High gain: 42 dB
Excellent return loss: >20 dB
High linearity gain control > 35 dB
Low Noise Figure: 0.82 dB
Switchable high/low gain state modes
Temperature and process stable active bias
GND
VCC1
VCC3
GND
14
13
2
11
GND
BPC1
3
10
GND
GND
4
9
VGC
7
8
N/C
GND
N/C
RFOUT
BPC2
12
VCC2
1
6
The SKY65373-11 is variable gain Low-Noise Amplifier (LNA) with
an active bias and high linearity performance. The first stage of
the device is comprised of an LNA with a bypass switch that is
followed by a high linearity driver amplifier, a variable voltage
attenuator, and a high linearity power amplifier. This module
architecture provides excellent return loss, low noise, and high
linearity performance.
The internal active bias circuitry ensures repeatable performance
over temperature. The device is fully integrated and requires
minimal external components.
The SKY65373-11 is manufactured in a compact, 8 x 8 mm, 16pin Multi-Chip Module (MCM) package. A functional block
diagram is shown in Figure 1. The pin configuration and package
are shown in Figure 2. Signal pin assignments and functional pin
descriptions are provided in Table 1.
The SKY65373-11 is part of a family of LNAs that cover the
frequency range of 699 MHz to 2570 MHz:
RFIN
5
S2793a
Description
Skyworks Green™ products are compliant with
all applicable legislation and are halogen-free.
For additional information, refer to Skyworks
Definition of Green™, document number
SQ04-0074.
15
VCC3
Figure 1. SKY65373-11 Block Diagram
Small MCM (16-pin, 8 x 8 mm) package (MSL3 @ 260 C per
JEDEC J-STD-020)
16
VCC2
SKY65369-11, 832 to 862 MHz (Data Sheet # 201767)
SKY65370-11, 814 to 849 MHz (Data Sheet # 201965)
SKY65371-11, 880 to 915 MHz (Data Sheet # 201766)
SKY65372-11, 699 to 748 MHz (Data Sheet # 202981)
SKY65373-11, 1710 to 1785 MHz (this Data Sheet)
SKY65374-11, 1850 to 1915 MHz (Data Sheet #201966)
SKY65375-11, 1920 to 1980 MHz (Data Sheet # 201755)
S2465
SKY65376-11, 2500 to 2570 MHz (Data Sheet # 202458)
Figure 2. SKY65373-11 Pinout – 16-Pin MCM
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201764C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 8, 2014
1
DATA SHEET • SKY65373-11 HIGH LINEARITY, ACTIVE BIAS LNA
Table 1. SKY65373-11 Signal Descriptions
Pin
Name
Description
Pin
Name
Description
1
RFIN
RF input
9
VGC
Gain control, 0 V (maximum gain) to +3.3 V
(minimum gain).
2
GND
Ground
10
GND
Ground
3
BPC1
Bypass switch for high/low gain state, terminal
1. See Table 8.
11
GND
Ground
4
GND
Ground
12
RFOUT
RF output
5
VCC2
Second state amplifier bias. Connect to
+5 V, 200 mA minimum DC supply.
13
GND
Ground
6
BPC2
Bypass switch for high/low gain state, terminal
2. See Table 8.
14
VCC3
Third stage amplifier bias. Connect to
+5 V, 300 mA minimum DC supply.
7
N/C
No connection. Can be left open or grounded.
15
VCC1
First stage amplifier bias. Connect to
+5 V, 80 mA minimum DC supply.
8
N/C
No connection. Can be left open or grounded.
16
GND
Ground
Electrical and Mechanical Specifications
The absolute maximum ratings of the SKY65373-11 are provided
in Table 2. Electrical specifications are provided in Tables 3
through 7. The gain control logic is shown in Table 8.
Table 2. SKY65373-11 Absolute Maximum Ratings
Maximum
Units
Supply voltage
Parameter
VCC
5.5
V
RF input power
PIN
+15
dBm
Storage temperature
TSTG
–55
+150
C
Operating temperature
TA
–40
+100
C
Junction temperature
TJ
+150
C
Thermal resistance
RTH
19
C/W
Note:
Symbol
Minimum
Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
2
January 8, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201764C
DATA SHEET • SKY65373-11 HIGH LINEARITY, ACTIVE BIAS LNA
Table 3. SKY65373-11 Recommended Operating Conditions
(@ Maximum Gain [VGC = VBPC1 = 0 V, VBPC2 = 3.3 V], PIN = –25 dBm, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Minimum
RF input power
PIN
Frequency range
f
1710
Supply voltage
VCC
4.75
Gain control voltage
VGC
0
Bypass control voltage:
Logic high
Logic low
VBPC1, VBPC2
Operating case temperature
TC
Typical
–25
2.7
0
5.00
3.0
–40
Maximum
Units
–12
dBm
1785
MHz
5.25
V
+3.3
V
3.3
0.6
V
V
+85
C
Table 4. SKY65373-11 Electrical Specifications (1 of 2) (Note 1)
(VDD = 5.0 V @ Maximum Gain [VGC = VBPC1 = 0 V, VBPC2 = 3.3 V], TC = +25 C, PIN = –25 dBm, f = 1747.5 MHz,
Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
1785
MHz
400
445
mA
0.82
1.00
dB
45
dB
0.8
dB
RF Specifications
Frequency range
f
Quiescent current
ICQ
Noise Figure (Note 2)
NF
Gain = +35 dB
Small signal gain
|S21|
PIN = –25 dBm
Gain variation over frequency
1710
39
42
PIN = –25 dBm:
Gain = 3 and 17 dB (low gain)
Gain = 18 and 35 dB (high gain)
Part-to-part gain variation
Absolute gain, high gain mode
Absolute gain, low gain mode
Absolute gain, low gain mode
Input return loss
Gain = 29, 27, 25, 21, 13, 10, and 7 dB
GMIN_HIGHGAIN
GMAX_LOWGAIN
GMIN_LOWGAIN
|S11|
PIN = –25 dBm, BPC1 = 0,
BPC2 = 1, VGC = 3.3 V
PIN = –25 dBm, BPC1 = 1,
BPC2 = 0, VGC = 0 V
Reverse isolation
|S22|
|S12|
+1
14
19
PIN = –25 dBm, BPC1 = 1,
BPC2 = 0, VGC = 3.3 V
16
20.5
–8
dB
dB
1
dB
PIN = –25 dBm:
20
20
19
21
dB
dB
dB
dB
Gain = 3 dB (low gain)
Gain = 17 dB (low gain)
Gain = 18 dB (high gain)
Gain = 35 dB (high gain)
15.5
15.5
15.5
15.5
dB
dB
dB
dB
PIN = –25 dBm,
Gain = 35 dB (high gain)
62
dB
Gain = 3 dB (low gain)
Gain = 17 dB (low gain)
Gain = 18 dB (high gain)
Gain = 35 dB (high gain)
Output return loss
–1
PIN = –25 dBm:
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201764C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 8, 2014
3
DATA SHEET • SKY65373-11 HIGH LINEARITY, ACTIVE BIAS LNA
Table 4. SKY65373-11 Electrical Specifications (2 of 2) (Note 1)
(VDD = 5.0 V @ Maximum Gain [VGC = VBPC1 = 0 V, VBPC2 = 3.3 V], TC = +25 C, PIN = –25 dBm, f = 1747.5 MHz,
Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
Symbol
Test Condition
Min
Typical
Max
Units
RF Specifications (continued)
3rd Order Input Intercept Point (Note 3)
1 dB Input Compression Point (Note 4)
Δf = 1 MHz,
PIN = –25 dBm/tone:
IIP3
IP1dB
Gain = 11 dB
Gain = 17 dB
Gain = 29 dB
Gain = 35 dB
+18.5
+15
+5
+5
dBm
dBm
dBm
dBm
Gain = 11 dB
Gain = 17 dB
Gain = 29 dB
Gain = 35 dB
+12
+8
–9
–11
dBm
dBm
dBm
dBm
Note 1: Performance is guaranteed only under the conditions listed in this Table. Recommneded gain switching point between high and low gain is 17.5 dB.
Note 2: Loss from the input SMA connector and Evaluation Board up to pin 1 has been de-embedded from the NF measurement. See Table 5 for the full specifcation. The Evaluation Board
input and output trace loss (typical) is 0.07 dB.
Note 3: See Table 6 for the full specification.
Note 4: See Table 7 for the full specification.
Table 5. SKY65373-11 Electrical Specifications: Noise Figure (Note 1)
(VDD = 4.75 to 5.25 V, TC = –40 to +85 C, PIN = –25 dBm, f = 1.710 to 1.785 GHz, Characteristic Impedance [ZO] = 50 Ω, Unless
Otherwise Noted)
Parameter
Noise Figure
Symbol
NF
Test Condition
Gain = 3 dB
Gain = 4 to 6 dB
Gain = 7 and 8 dB
Gain = 9 and 10 dB
Gain = 11 and 12 dB
Gain = 13 and 14 dB
Gain = 15 and 16 dB
Gain = 17 and 18 dB
Gain = 19 and 20 dB
Gain = 21 and 22 dB
Gain = 23 and 24 dB
Gain = 25 and 26 dB
Gain = 27 dB
Gain = 28 dB
Gain = 29 dB
Gain = 30 dB
Gain = 31 dB
Gain = 32 dB
Gain = 33 dB
Gain = 34 dB
Gain = 35 dB
Min
Typical
Max
Units
23.50
22.80
20.80
18.80
16.80
14.80
12.80
10.80
8.80
7.30
5.30
3.50
2.60
2.40
2.20
2.10
1.75
1.60
1.45
1.35
1.25
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
Note 1: Verified by characterization.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
4
January 8, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201764C
DATA SHEET • SKY65373-11 HIGH LINEARITY, ACTIVE BIAS LNA
Table 6. SKY65373-11 Electrical Specifications: IIP3 (Note 1)
(VDD = 4.75 to 5.25 V, TC = –40 to +85 C, PIN = –25 dBm/Tone, f = 1710 to 1785 MHz, Δf = 1 MHz,
Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted)
Parameter
3rd Order Input Intercept Point
Symbol
IIP3
Test Condition
Gain = 30 to 35 dB
Gain = 18 to 29 dB
Gain = 12 to 17 dB
Gain = 3 to 11 dB
Min
Typical
Max
Units
dBm
dBm
dBm
dBm
+1
+3
+14
+18
Note 1: Verified by characterization.
Table 7. SKY65373-11 Electrical Specifications: IP1dB (Note 1)
(VDD = 4.75 to 5.25 V, TC = –40 to +85 C, PIN = –25 dBm, f = 1710 to 1785 MHz, Characteristic Impedance [ZO] = 50 Ω,
Unless Otherwise Noted)
Parameter
1 dB Input Compression Point
Symbol
IP1dB
Test Condition
Gain = 30 to 35 dB
Gain = 29 dB
Gain = 18 to 28 dB
Gain = 12 to 17 dB
Gain = 6 to 11 dB
Gain = 3 to 5 dB
Min
Typical
Max
Units
dBm
dBm
dBm
dBm
dBm
dBm
–14.0
–10.0
–7.0
+4.0
+8.0
+10.2
Note 1: Verified by characterization.
Table 8. Gain Control Logic
BPC1
(Pin 3)
BPC2
(Pin 6)
High gain
0
1
Low gain
1
0
Note: “1” = 3.0 V, “0” = 0 V.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201764C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 8, 2014
5
DATA SHEET • SKY65373-11 HIGH LINEARITY, ACTIVE BIAS LNA
Evaluation Board Description
Package and Handling Information
The SKY65373-11 Evaluation Board is used to test the
performance of the SKY65373-11 LNA. An assembly drawing for
the Evaluation Board is shown in Figure 3 and the layer detail is
provided in Figure 4. The layer detail physical characteristics are
noted in Figure 5.
Since the device package is sensitive to moisture absorption, it is
baked and vacuum packed before shipping. Instructions on the
shipping container label regarding exposure to moisture after the
container seal is broken must be followed. Otherwise, problems
related to moisture absorption may occur when the part is
subjected to high temperature during solder assembly.
An Evaluation Board schematic diagram is provided in Figure 6.
Table 9 provides the Bill of Materials (BOM) list for Evaluation
Board components.
Package Dimensions
The SKY65373-11 is rated to Moisture Sensitivity Level 3 (MSL3)
at 260 C. It can be used for lead or lead-free soldering. For
additional information, refer to Skyworks Application Note, PCB
Design and SMT Assembly/Rework Guidelines for MCM-L
Packages, document number 101752.
The PCB layout footprint for the SKY65373-11 is provided in
Figure 7. The typical part marking is shown in Figure 8. Package
dimensions for the 16-pin MCM are shown in Figure 9, and tape
and reel dimensions are provided in Figure 10.
Care must be taken when attaching this product, whether it is
done manually or in a production solder reflow environment.
Production quantities of this product are shipped in a standard
tape and reel format.
T1
T2
10
9
8
7
6
5
4
3
2
1
N/C
11
N/C
12
PB2
J2
PB1
J1
GAIN
RFIN
Test Coupon
RFOUT
GND
VCC3
VCC3
VCC2
VCC2
VCC1
VCC1
X100
S2794
Figure 3. SKY65373-11 Evaluation Board Assembly Diagram
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
6
January 8, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201764C
DATA SHEET • SKY65373-11 HIGH LINEARITY, ACTIVE BIAS LNA
Layer 1: Top – Metal
Layer 2: Ground
Layer 3: Signal
Layer 4: Bottom Ground
S2795
Figure 4. SKY65373-11 Evaluation Board Layer Detail
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201764C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 8, 2014
7
DATA SHEET • SKY65373-11 HIGH LINEARITY, ACTIVE BIAS LNA
Cross Section
Name Thickness (mm) Material
Tmask
0.010
Solder Resist
L1
0.035
–
Dielectric
0.305
R04003C
L2
0.018
–
4 x 0.101
R04350B RF
L3
0.018
–
Dielectric
0.305
R04003C
L4
0.035
–
Bmask
0.010
Solder Resist
Dielectric
S3351
Figure 5. Layer Detail Physical Characteristics
L100
Same Length
C104
C124
T1
RFIN
C105
L102
1
2
3
C117
C112
VCC3
C113
13
GND
VCC1
C123
RF Input
14
VCC3
15
GND
16
VCC1
C101
T2
RFOUT
C116
J1
C100
RFIN
RFOUT
GND
GND
BPC1
GND
GND
VGC
J2
C121
12
RF Output
11
10
C120
7
C106
C108
Gain
N/C
8
×
VCC2
C107
6
N/C
VCC2
5
L101
9
C118
BPC2
4
PB1
×
C109
PB2
C119
X100: 12 Header
5
6
7
8
9
10
11
12
VCC1
4
VCC2
3
VCC3
2
N/C
N/C
PB2
PB1
GAIN
1
S2797
Figure 6. SKY65373-11 Evaluation Board Schematic
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
8
January 8, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201764C
DATA SHEET • SKY65373-11 HIGH LINEARITY, ACTIVE BIAS LNA
Table 9. SKY65373-11 Evaluation Board Bill of Materials
Component
Size
Value
Tolerance (%)
C100, C106, C112
1210
10 μF
10
C101, C107, C113
0402
10 pF
5
C104, C109, C116, C119, C120, C121, C123, and C124
0402
1000 pF
5
C105, C108, C117
0402
100 nF
10
C118
0402
DNI
–
C119, C120
0402
1000 pF
5
C121, C123
0402
150 pF
5
L100, L101, L102
0603
68 nH
2
Pin 16
8.3
Pin 1 indicator
0.20 X 0.20
Pin 1
16X 0.95
16X 0.7
Stencil aperture size of
80 to 100% of the
module/package
solder mask openings
8.3
36X 0.86
Exposed Center Pad
36X 0.86
Package Outline
0.125 Typ.
1.42 Pitch
Stencil Aperture
Top View
Thermal via array Ø0.3 mm on
0.6 mm pitch will improve
thermal performance.
NOTE: thermal vias should be tented
with solder mask, 30-35 μm
Cu plating recommended.
Pin 16
8.3
8.4
Pin 16
0.6 Pitch
0.71 Typ.
Pin 1 indicator
0.20 X 0.20
Pin 1
10X 0.95
Pin 1
16X 1.05
Opening size of
60 to 100%
of exposed center
opening shown
10X 0.7
16X 0.8
8.3
8.4
2X 2.9
0.6 Pitch
Exposed Center Pad
Package Outline
Package Outline
0.25 Typ.
2X 2.9
1.42 Pitch
1.42 Pitch
Metallization
Top View
Solder Mask Opening
Top View
All dimensions are in millimeters
S2853
Figure 7. SKY65373-11 PCB Layout Footprint
(Top View)
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201764C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 8, 2014
9
DATA SHEET • SKY65373-11 HIGH LINEARITY, ACTIVE BIAS LNA
Pin 1
Indicator
Skyworks Part Number
Lot Number
SKY65373-11
XXXXXXXXX
YYWW CC
Date Code:
YY = Calendar Year
WW = Week
CC = Country Code
Y0389
16x SMT Pad
0.1 M A B C
B
Pin 1
Indicator
4X 2.13
8
4X 0.71
Figure 8. Typical Part Marking
C
Pin 1 Indicator
See Detail B
Pin 16
0
Pin 1
12X 2.47
12X 1.482
12X 0.494
8
0
4X 0.71
4X 2.13
A
C
8X 3.9
36X Solder Mask Opening
0.2 A B C
A
1.3 ± 0.15
0.15 A B C
0.1
Side View
Top View
(0.1)
0.7 ± 0.1
Bottom View
0.86
0.86
0.2 x 45°
Metal Pad Edge
0.7 ± 0.05
0.86
0.86
5X R0.05 Max
Detail A
Pad
Scale: 2X
4X R0.05 Max.
Detail B
Detail C
Scale: 2X
Scale: 2X
1X This Rotation
35X This Rotation
4X This Rotation
4X Rotated 180°
4X Rotated 90° CW
4X Rotated 90° CCW
Dimensioning and tolerancing according to ASME Y14.5M-1994.
All measurements are in millimeters
Figure 9. SKY65373-11 16-Pin MCM Package Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
10
January 8, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201764C
S2473
DATA SHEET • SKY65373-11 HIGH LINEARITY, ACTIVE BIAS LNA
±0.05
12.00 (P1)
4.00 (Po)
Pin 1 Indicator
(see Note 7)
2.00 ± 0.05
0.30 ± 0.05
1.75 ± 0.10
7.50 ± 0.05
B
5°
8.35 (Bo)
A
A
16.00 ± 0.03
∅1.55
B
1.70 (Ko)
8.35 (Ao)
Section B
∅1.50
Min.
5°
Notes:
1.
2.
3.
4.
5.
6.
7.
Carrier tape: black conductive polystyrene.
Cover tape material: transparent conductive.
ESD-surface resistivity is ≤1 x 1010 Ohms/square per EIA, JEDEC TNR Specification.
Po/P1 10 pitches cumulative tolerance on tape: ±0.20 mm.
Ao and Bo measurement point to be 0.30 mm from bottom pocket.
All dimensions are in millimeters.
Pin 1 orientation is in top left corner for the following Skyworks products:
SKY77503-XX
SKY77506-XX
SKY77512-XX
SKY77526-XX
SKY77343-XX
SKY65369-11
SKY65370-11
SKY65371-11
SKY65372-11
SKY65373-11
Section A
SKY65374-11
SKY65375-11
SKY65376-11
SKY65379-11
For all other 8 x 8 mm MCM/RFLGA products, pin 1 orientation is in top right corner.
Y0491
Figure 10. SKY65373-11 Tape and Reel Dimensions
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
201764C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • January 8, 2014
11
DATA SHEET • SKY65373-11 HIGH LINEARITY, ACTIVE BIAS LNA
Ordering Information
Model Name
SKY65373-11 LNA
Manufacturing Part Number
SKY65373-11
Evaluation Board Part Number
TW19-D640
Copyright © 2012-2014 Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by
Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the
information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to
update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.
No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or
information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions
of Sale.
THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A
PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY
DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS
SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,
LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,
death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any
damages resulting from such improper use or sale.
Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of
products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for
applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.
Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands
and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com,
are incorporated by reference.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
12
January 8, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201764C
工商网监
湘ICP备2023018690号
