611219

PHASE LOCKED OSCILLATOR MODEL 611219 (1050 MHz) Features ! Low Phase Noise: -136 dBc/Hz @ 100 kHz ! Low Spurious: -70 dBc Typical ! Internal Reference Design ! Environmental Screening Available Specifications CHARACTERISTIC Frequency (MHz) Output Power (dBm) Variation Over Temperature (dBm) Spurious (dBc) Phase Noise (dB) TYPICAL Ta= 25 ºC 1050 +10 +0.75 -70 -90 dBc/Hz @ 100 Hz -119 dBc/Hz @ 1 kHz -127 dBc/Hz @ 10 kHz -125 dBc/Hz @ 30 kHz -136 dBc/Hz @ 100 kHz -147 dBc/Hz @ 1 MHz 1.5 -25 TTL (High=Locked) +1 -55 ºC 15 150 MIN/MAX Ta = -20 ºC to +70 ºC 1050 +9 +1 -60 Description Spectrum Microwave’s Series 600 Phase Locked Oscillators use a High “Q” Coaxial Resonator in the resonant circuit. The circuit is lightly loaded to obtain the lowest phase noise possible. The resonator is soldered to a printed circuit board and well grounded to minimize modulation sidebands during shock and vibration. Buffer amplifiers are used to provide isolation from load VSWRs; Regulators filter noise on the DC input voltage. External reference models are also available. A lock indicator circuit is provided to signal an out-of-lock condition. VSWR Harmonics (dBc) Lock Indicator Stability (ppm) Storage Temperature Supply Power DC mA 2.0 -20 TTL (Low=Unlocked) +15 +125 ºC 15 160 Spectrum Microwave, Inc. www.SpectrumMicrowave.com 2707 Black Lake Place Phila, Pa. 19154 PH: 215-464-4000 FAX: 215-464-4001 Rev. 9/22/08 PHASE LOCKED OSCILLATOR MODEL 611219 (1050 MHz) Outline Drawing Spectrum Microwave, Inc. www.SpectrumMicrowave.com 2707 Black Lake Place Phila, Pa. 19154 PH: 215-464-4000 FAX: 215-464-4001