MM4XXN-1

Triple Balanced Mixer Multi-Oct ave Band Electrical Specifications: (1) Model MM4xxN-1 RF 1.5 to 9.0 GHz Model MM4xxN-1 Conditions Parameter SSB Conversion loss:(2) (3) Isolation LO to RF: LO to IF: RF to IF: IF to RF: Input 1 dB Compression Point: Input Third Order Intercept Point: LO Power: (4) RF (GHz) 2.0-8.0 2.0-8.0 1.5-9.0 LO (GHz) 2.0-8.0 2.0-8.0 1.5-9.0 1.5-4.5 4.5-9.0 1.5-9.0 1.5-9.0 1.5-9.0 1.5-9.0 IF (MHz) 10-2000 10-4500 10-4500 Min Specifications Typical 6.3 dB 7.3 dB 8.0 dB 17 dB 27 dB 30 dB 23 dB 25 dB +5 dBm +8 dBm +12 dBm +15 dBm +14 dBm +17 dBm +21 dBm +24 dBm +10 dBm +13 dBm +17 dBm +21 dBm Max 7.5 dB 8.5 dB 10.5 dB LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors 1.5-9.0 1.5-9.0 10 dB 20 dB 20 dB 10-4500 10-4500 1.5-9.0 1.5-9.0 10-4500 1.5-9.0 1.5-9.0 10-4500 MM44 MM46 MM47 MM48 MM44 MM46 MM47 MM4 8 MM44 MM46 MM47 MM48 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55 C to +100 C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss. 3. Conversion loss typically degrades less than 0.5 dB at +100 C and improves less than 0.5 dB at -55 C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM4xxN-1 Outline: N Typical Performance at 25 °C SPECTRUM All dimensions are in inches and [mm]. Spectrum M icrowave · 2 144 F ranklin D rive N .E. · P alm B a y, F L 3 2905 · P H ( 888) 5 53-7531 · F ax ( 888) 5 53-753 2 Rev. 09/27/06 www.SpectrumMicrowave.com Spectrum M icrowave (Europe) · 2 707 Black Lake Place · P hiladelphia, PA 19154 · P H ( 215) 464-4000 · F ax ( 215) 464-4001